UNBOXING + INSTALL + LETS PLAY! - Racerstar 3650 BRUSHLESS Motor UPGRADE + 60A ESC - Truck Truggy RC
Vložit
- čas přidán 3. 07. 2024
- Today we unbox, install, and play with the new Racerstar Brushless Motor! We install it in our Brushed RC Racing Car to achieve more performance and more fun! This a great upgrade that truly makes it a blast to drive!
For your very own, check out: www.banggood.com/Racerstar-365...
Motor Features:
- 4 pole 12 slot hi-torque motor design
- CNC machined 6061 T6 billet aluminum heatsink can
- High purity copper windings maximizes efficiency
- High RPM ABEC 5 oversized bearings
- Universal fit, fits all 1/10 brushless cars; multi-mounting system for M3 screws
- Precision balanced rotor, smoothness for best reliability and maxium RPM
- Stator- super thin (0.35mm) laminations
- Removalbe/replaceable rotor
- Precision engineered for maxium energy coversion
Motor Specification:
Watts: 900
Max Voltage: 13V(3900KV), 16V(3100KV), 22V(2300KV), 24V(2050KV)
Max Amps: 69A(3900KV), 56A(3100KV), 41A(2300KV), 38A(2050KV)
Rotor Poles: 4
Max RPM: 50000
Length: 50mm
Diameters: 36mm
Weight: About 180g
Shaft: 3.17mm
Length of Extend Shaft: 15mm
Connector: 4.0mm Gold
ESC Features:
- Specially desighed for RC car with excellent start-up, acceleration and linearity feartures
- Compatible with sensorless brushless motor
- The strong resistant current capability, excellent heat dissipation
- Multiple protection features: low voltage cut-off protection for lithium or nickel battery / over-heat protection / throtttle signal loss protection / motor blocked protection
- Easily programmed and compatible with pocket-sized program card - Krátké a kreslené filmy
Loved the before and after 👍💯
How many times did he say actual or actually?
umm can ya help me by answering this questions.,.....
1.what is a esc.
2. how do we insert this esc and brushless motor in a cheap rc car which doesn't have speed control or proposional steering and just cheap crcuit boards dat get hot so fast .
3.I'm just into the hobby Im no expert so if you help me my childhood would be much better than now..
@@rasinap2432
The esc is basically what controls your motor and supplies power to the reciever. You can't really install a brushless system in a cheap toy grade rc, it will probably just strip the gears.
@@user-dz2jv4in5z oh.......Thanks a lot
We can go ahead
It's so fast the car went tripod! How is yours holding up? I have 3900kV in my drift car and it works great but it lives its life only on smooth surface. I'm thinking about getting another one for my offroad car and not sure how will it cope with bumps and jumps.
WOW OMG it is so fast WOW it is is 100 times faster than the last AMAZING
Ya marhaban wa Shlonak ya Shabab.
Awesome
Dude It isn’t rockstar it’s racestar. See 1:15
Actually racerstar
@@romula8 you gotch him😂
This dude obviously has no idea what he's talking about when he's talking RC terminology lmao
Ikr
So true
He even had the battery plugged in...
Yeah. He should be putting a 8s leopard 800kv and a 300a 12s esc.
Lol
Is it a Lipo battery that you are using, and if yes is it a 2s or 3s? :)
Is the esc the same as surpass 60a from gearbest?
nice video.. can do review on HsP Brontosaurus pls :D
I just saw your video and I am ordering the same motor/ESC combo that you have and hope you would answer a few questions . I know you said in the video you upgraded your battery to a 3300 milliamp hour but could you tell me if you're running a 2s or 3s and is it a lipo or nickel metal hydride? Also I saw you just swapped the pinion directly across from the original brushed motor, have you since gone to a larger pinion by one or two teeth? And lastly when you programed the ESC what did you set the punch at and also the % for the drag brake?
Are u using stock remote?
is it ok in wltoys A979?
For 1/10 scale?
How does the motor wires hook up ?
Khan, Thanks for the Great video. Very interesting, informative, helpful in making a decision to go brushless motor and ESC
need arduino code to operate this (60A) esc.
Will it work on a axial scx 10 3?
The Mah would increase your run time not the power output
need arduino code to operate this (60A) esc.
Did you have to program it
You can’t change torque with a programming card plz do your research
You can change punch settings..That is how much torque you get off the line
Can this ESC reverse the Brushless motor quickly?
need arduino code to operate this (60A) esc.
what car did you put thhat in
Is it work on capo ace 1!
Which battery are you using
how do you knw how to plug esc into 3 black plugs on motor into 3 color plugs on esc - thanks
If it is sensorless it doesn't matter. If it goes in the wrong direction then just switch two plugs BUT ONLY SENSORLESS!!!!!!!
I ordered a 3650 4300kv brushless motor with a 120 amp esc, because 60 amp esc’s fry a lot, and I’m going to swap out my brushed motor and swap my pinion and spur gear to metal, so it can withstand Th strength of the motor
Good 60 amp escs don't fry at all. Cheap ones are overrated, that's why they fry.
MERE KE bhot fast rc car magti hai,Like 1:6 scale, sab gears metal ke hone chayiye, kya aap bana sakte hai
Hi, I am having an issue, I got the racestar motor (4500kv) and installing it on my wltoys 12428 but After I sort out all the main power is going to the reverse gear not in the forward gear. Any clue how to fix?
Swap two wires off the motor it should go forward.
What rc car is that?
What is that red part down the middle called?
Hello, I have placed a brushless combo brand NOSRAM to my touring hpi 1/10 but I have problems to accelerate and rewind. when accelerating to the "maximum" the acceleration is locked and from time to time it does not recede. ah! It is motor with sensors. I hope you can help me. Thank you
These cheap systems are bad, should spend more on a better system.
Don't keep the battery connected while your car is in storage! If you do it, it will break!
Khan flicks plz upload how to hack cozmo app unlimited sparks and etc
how does the remote connect to the esc?
You put the communication cable in the receiver which is bound to the transmitter.
hello,my 3650 50a rc car The throttle is full of paste
Can I use this for my exceed rc I need answers asap
Ray Supra ya but don’t
Dose this work for traxxas slash 2wd
I have a 150amp w/600 amp burst and an arrma 2400kv. It is about 4x bigger. I snapped the axles on the slash.
Next time show the set up on the esc, Duh
What is that truck or car brand
hola. donde puedo comprar este carro???
Rc Cars models ?
3900 volt? okeeeeeeeeeey it's also racestar not rockstar why the even sponsering u wth dude
"3900 volt" plus the Minnesotan accent made me lose all respect.
@@isaiahhiggins its like he did no research whatsoever, he said you can set the speed with the esc, like the esc has a program to raise or lower rpm limit.
@@nathanschultz1440 The esc can be programmed though to change curve and punch
@@philthyco1 not sure what "cure" is but im assuming it isn't RPM
@@nathanschultz1440 Read it again .. curve and punch
I just realized he said the MAH matter for more power 😂 I’m dead that’s just the capacity of the battery and the Volts and discharge is what counts
But the higher mah, the higher amperage, so 30C 3300 mAh = 99 amps and 30C 5000 mAh = 150 amps
It's not aluminum finish it's heatsink
Satish Vaidya ikr
ROFL, he was soo OVERLY exited when he said "the ESC is actually 60 Amp!!! so its actually quite Powerful!" Lol, so funny! But I am very curious, was this over-acting or was he really that crazily exited over literally the most STANDARD sized ESC that comes in literally EVERY singly 1/10 brushless RC?
Can you put this on a Walmart brand economy car
No
Joshua Mei thanks for telling me I was about to buy the fast and the furious rx 7
Hola a todos Me gustaría saber que me puede ayudar a configurar mi motor y también para resolver un problema que se extiende por el contrario da la espalda en lugar de hacia adelante y la misma hacia adelante en lugar de hacia atrás me ayuda muchas gracias gracias
Happy Design.s invierte el coneptor q ba de esc al receptor el de tres pines y listo
need arduino code to operate 60A esc.
What?
Actually!
What battery are you using, 2s or 3s? Are you experiencing any cogging with the motor?
+GearBang 3S, I ended up upgrading the battery and there was no issue at all. The company that makes this also lets you reprogram the ESC as you please. I did have a issue with the motor pin grinding the larger gear... cheap fix but haven't had time to order one
It's not called a 'pin' you tard. It's a pinion. Nearly everything you said in the video and in your comments is wrong.
can i use this motor for electric longboard?
No it's too small
@@lilnash7 mmhh.oke, but this motor have 2000kv, other motor are the similar to this
@@ramsy2246 that's a 39000 kv too small , I don't own a electric board but I do own bigger electric cars and I run bigger motors I think a 2200kv and below should be enough power for a longboard still not enough power you can always get 1/5th scale motors which re much bigger ND have high voltage too
need arduino code to operate this (60A) esc.
Don't be a noob man answer the questions is not so hard !!! So does this esc and motor fix to a 959B? Thanx
Klodi Topallaj yes
Klodi Topallaj don't be a noob man, look up the specs in his descriptions is not so hard !!!
Your dad its noob fu.king Ken from estonia
You're the noob here dumbass.
3s?
Again, NEVER buy "cheap" Brushless RC motors unless you want a motor that will Overheat & stop running after 5 mins due to the WORST bearings in the known universe & literally NO "Balancing" or testing at all, making them Overheat & stop working literally 10x faster than a more expensive, known brand name motor. But, Cheap ESC's are often great! Especially the Racerstar ESC (NOT the model in this video tho!) the Racerstar 120Amp "6S Lipo" capable model Ive tested on the Huge Traxxas Summit, the Thunder Tiger 1/8 EMTA G2 & the HBX T6 HUGE 1/6 Scale buggy, all running 6S 6000Mah long lasting batteries & the 120Amp 6S Racerstar ESC barely even got warm after full runs!
Actually
if I want to use a 120A ESC and a 4S Lipo what type of motor should I use?
Any worse you can do is fry a $20 dollar motor lol
Any castle creations motor or hobby wing motor
Rv
I couldn’t see much af what he was actually plugging together lol
listen to this joke jingle bells bataman smells robin layed an egg superman made a fart that blew up USA hey superman and batman you guys stink take a shower
Best advice for RC, NEVER, EVER buy "Cheap" Motors! They may look ok & will probably even make your RC go very fast (Even compared to more expensive & brand name motors) BUT, the "Bearings" & the Balancing etc are TERRIBLE! (literally the cheapest & Worst you can get!) The problem? They WILL get EXTREMELY HOT & Overheat Very, very fast & will stop working until they cool (if they arent burnt out already) Unless u only want "5 Minuets" of run time this is obviously a HUGE issue! But, Cheap ESC's arent that bad! Actually most are great, In fact the "Racerstar" brand in the vid offer an Amazing "6s Lipo capable" 120A, 720A burst ESC! & its possibly the cheapest 6s capable ESC ever! Couldnt recommend it more!
Have this happened to you?
Video about nothing, hard to see,makes no sense...
is it ok in wltoys A979?
reply plsss ty
Yes
They r pretty much the same