How To : Minimal e36 Wiring
Vložit
- čas přidán 12. 06. 2017
- Showing how to wire an e36 with as little wiring as possible and still working cluster on our current build; e36 drift truck
Facebook
/ skidlab
Instagram
/ skid_lab
Buy shirts here
www.skidlab.bigcartel.com
Check out skid_lab on instagram for a the cluster wiring explained more in detail!
I have a 96 318i. Battery died one day a haven't been able to get the car started no crank no start. I jumped two wires behind the glove box to get it to crank. But it will not turn over. I have one key that has a transponder but that's it. Please Help
Dude you just totally answered my questions tonight for my e36 build I wanted to put the wiring on a minimal scale now i can thanks for the informational video man it’s gonna be in my saved videos
i love this! this video helped me so much! thanks from denmark :)
Why do you not have more subs good video! I liked and subbed with bell :D
I have to stop being lazy and make more videos. Thank you for the support!
Any tips on getting the fuse box out? Watched your other vid, which helped tremendously to figure out how to do my push start and wire thinning.
Great video pal! Any expenses with an automatic loom? Basically I got old van in middle of conversion for m42b18 witg GM auto box. Loom has additional 25 pins plug, as well separate ECU for box. Thanks in advance, cheers!
thanks !!! this is great stuff .
Very nice! Very helpful! By the way, i need connect plus or ground to ignition and starter?
Putz is helping out with my s50 swap from 6 years in the past😂
🤣🤣🤣
Nice and helpful movie, it will help me in my projekt, thanks ;)
Your truck is badass,
Nice one mate 👍
Hey man, you seem pretty handy with the e36 wiring harness. Could you point me in the direction of the coil pack power wire that gives power to all 6 coils? I’m trying to be able to ignition cut for a project I’m trying to do. Thanks in advance!
great video 👍
Very helpful!
I know what to do this week end! thanks man!
Send us a message if you run into any issues. Thanks!
I didn't ran into any issues but I started my M60B40 with only 2 wires :) I can finally get rid of all those wires under the dash! Thanks man really appreciated!
Awesome man
Hell yeah! Thanks you!
EDit Custom glad I’m not the only one in 2019 that needed this 😂
You're nuts bro! Thank you so damn much. haha
Great work man, would you be interested in making me a harness like this only I need front and rear lights and windows?
Thanks
Can you do a video on the wireing of the relay and fuses thanks
awesome. i have a question. im building a 74 mustang II wit a m50 e36 swop. i have the e36 harness with the plug you showed. i am using my mustangs original cluster and fuse box. i will connect all the corresponding wires to the mustangs harness.
ignition, temp, starter (old coil wire), alternater.
but where do i connect the tac signal to?
also the brown green, brown yellow and brown wires. you said they are for the oil and coolant. which is which?
Mustang Boss First of that is awspme awesome and not if the stock guages will work they may use different resistance.
Lovely info bro can you please explain everywire and sensor individually from the loom
Hi I'm trying to get an e46 to the least wire possible would I be able to do similar to what you have down
Hi, I have a Mitsubshi k74 and I want to put in a VMW M57 engine in it. I would like some advice to do it or purchase an ecu wiring loom to purchase, can you help?
Good video
Hey I’m doing a simplified harness in my e36 and I can’t get the key to turn to unlock the steering column, any help with what I need to plug in for it to work ?
You can remove the whole ignition assembly and the steering lock.
is this with the ews system ....?
I'm trying to do this on a 98 with m44b19 , when I have have pin 21 and 18 I only get a click but no crank
even tho this is an old video, im hoping to get an answer lol, but is there any downside to doing this on a "weekend car" what all basic amenities does this get rid of? i have a e36 that is very aesthetically modded, but drive train doesn't matter as much to me as long as it all works and its enjoyable to drive around town. Im throwing in a new engine and wanna simplify the wiring to make it easier on everything and also some stuff got misplaced and i dont remember some stuff that got taken off or disconnected. Any info or advice please?
also do you have to do anything to the ecu or can you keep that 100% stock and still have to keep all the emissions sensors and crap under the intake?
With it wired like this you lose basically every interior comfort. Also the engine is separate then the chassis harness so its not going to help you with the engine replacement. I wouldn't recommend
Struggling with the cluster, could you do like a close up of what wires you need to keep off of the three plugs to have basic function of the cluster. The wiring diagrams I have are not helping the matter at all
A good viedeo
viswanathan iyer thank you!!
idk if you will see this but i could use some help on my m50, i am having a hell of a time with fiding where each connector goes from the engine harness to the engine. if anyone can help that would be awesome
where you plug the TAC (throtle wire ) ???
Great Info! I didn't see if Pin 21 was connected to GROUND (black clip) or not. I see the starter wire is connected to batt. positive, but I just couldn't catch where the Pin 21 (DME) wire went. I did an auto/manual swap (97 318is) and have been unable to start it for 2 months now. It cranks, but no fuel/spark/injectors. I HAVE changed the CPS. Cheers, Simon
Pin 21 gets constant power for the ecu
hey mate did you ever end up sorting your issue out? cheers
@HussDaddy well did you? Im doing a m50b20 swap into e46 316ti compact. Hell of a job since never made it to USA.but the m50 engines can start on few wires. Do like to know about that wire 21
Do you have an email so I can show you a picture of my wiring and so you can give me advice?
Hi skidlab. I am doing an engine swop on an e36. Fitting a 2,5i from an e34. I have noticed differences in the harness(ecu location etc). Will the main plug wiring be the same as shown here?
Yes the x20 plug is the same pin out
One last question regarding this video. I am very interested in using my original cluster with my build. Is there any way u could send me more detail for wiring it up. Cannot see wire colours used for positive and negative connections. I would prefer to use the tacho, speedo, oil pressure, fuel level and charge light. Any extra info u can share would be appreciated
do you sell them ?
Having an issue with my 94 325i m50, it’s got a red label 413 and no ews, new crank sensor and new dme delay. It’s got fuel if jumped, starter turns with key on, no spark, any ideas what the issue is ? I wanna figure this out before I cut up my harness and do the simplified one. I cut out the radio and heat/ac wires because the car does not have them. Any help would be much appreciated. I also painted my engine bay
Since you painted your engine bay did you cleaned off the paint for your engine ground?
awesome. thanks for posting! Deleting EWS is as simple as hooking up one of the brown wires to power-
Jay.S I’m having an red issue I did the same thing he showed in the video and turns over but won’t start (I know the motor runs I drove this same car 2 days prior haha). What brown wire is it?
Yea what wire lol
What wire
@@Zach.Smith68 wow didnt realize i posted this so long ago- I can check my manuals tomorrow-
@@JaySims that would be super helpful I’m dealing with an ews 1 car and I’ve did everything he said and the car stil just cranks and doesn’t start I believe the EWS is preventing it from running
How do you disable ews3 on a bmw 2000 5series
Quick question , so for the harness the 2 wires , you are just applying positive to both ? Basically you could just tie a ignition switch directly to those an it should start right up ?
Im actually swapping a 97 328 drive train into a miata , with the ews can i just pull the ignition switch from the bmw an it should run?
@@devangarcia2314 you are correct with the wirring but its not that simple with the ews your best bet is to get ews deleted
SKID LAB so if i get the ews delete , everything would just wire up like the video?
@@devangarcia2314 yup the only thing i dont show is the obd2 port because in the video i show an obd1 car
SKID LAB sweet thanks i will let u know if i run into any troubles maybe you could help me resolve , its my first swap 👍🏻
What make are this connectors that you are using. Thanks
I used either the HiseNook or the MUYI but i did end up having issues with poor connection it could have been user error but the pins sit really loose in the plug and don't always lock in causing loose connections
Do you have the positive battery cable connected?
Yes it is hooked the battery is in the front where the junction point usually is
Thanks m8
Your dme harness, did you modify it?
Nope
So for some reason my 3rd injector is not pulsing fuel and i think theres a short somewhere and idk what to do
With a stock or custom harness?
Wat pin on the x20 plug in check engine light i dont have a gray wire
Pin 8
I don't have a pin 8
What about fuses? Should i just jump Pin 21 without a fuse?
If just for testing purposes it will be okay
nice info but the noisy focus camera is a pain
so my question is how do you wire the dme that is tucked in the firewall on the passenger side into that harness because I believe you need that to drive the car on a safe tune correct?
That's all left stock this harness wires to the through the x20 connector
How do you power the ecu ?
Pin 21
@@SKIDLAB perfect thank you from Ireland 🇮🇪
How can i contact you i need your help!!
CarsCartel either skid lab on facebook or skid_lab on instagram give me a shout ill see if i can help!
Mine still wouldn’t start….I have an ews delete also!!! But it still won’t start!!
ok so it started , but no info on where to connect what on that big ass round connector..............
I wanna rip my fuse box out so bad but I gotta get my car inspected first
Putz you're cute
Hey can i get your facebook i want contack with you, ask some questions
just provide a list of all things that are not necessary, which you removed and which you left. It's much easier to follow the list then to rewind a video :-)
Its a short list i removed everything but the engine harness
So engine harness is what? Ignition, fuel pump.... And ?
@@XW0RKS the engine harness is completely separate from the chassis harness like i show in the beginning of the video
21 and what other connection?
dominic white pin 18 is your start signal
SKID LAB will this bypass any security and alarm restrictions? I have a customers car I'm working on and its non ews but he has a security system restricting spark and fuel
dominic white probaly not as the fuel and spark signal come from the ecu itself you would have to trace the wires back and see where they tie in
Obd2 car different but similar difficulty?
The m52 is not much differnt basical the check engine light is differnt and you need your ecu tunned to delete ews
@@SKIDLAB thanks man I appreciate your hard work, track car build in progress. This makes my life much easier! @daniel_immeyer on insta
SKID LAB that’s exactly what I’m struggling with, DMed you on Instagram about it