25. KYMCO VENOX. Greasing and adjusting the steering. Ball bearing problems.
Vložit
- čas přidán 23. 05. 2021
- In this video I show you how I have tried to grease and adjust the direction and the problems that I have encountered with the loose balls of the bearings.
It belongs to a set of videos on the INTEGRAL SETUP of the KYMCO VENOX 250 c.c. carburetion.
Playlist of KYMCO venox 250 comprehensive maintenance videos.
• KYMCO VENOX 250. Puest...
The individualized links to each of the videos are as follows:
1. Presentation.
• KYMCO VENOX 250. Puest...
2. How to remove the fuel tank and clean it inside.
• Cómo desmontar el depó...
3. Cleaning the radiator and the cooling circuit.
• KYMCO VENOX 250. Limpi...
4. How to remove the carburettors from the motorcycle.
• Cómo extraer los carbu...
5. Disassembly, cleaning and assembly of the carburetors.
• Cómo desarmar, limpiar...
6. How to adjust the valves.
• Cómo hacer el reglaje ...
7. Greasing accelerator and clutch cables.
• Engrasando los cables ...
8. Installing the carburetors on the bike. Install the thermostat and add and purge the new coolant.
• KYMCO VENOX. Instaland...
9. The starter motor won't turn. Checking the motorcycle's starting system.
• EL MOTOR DE ARRANQUE N...
10. The motorcycle does not start. I have no Spark. Part 1/3. How to check the coils.
• La moto no arranca. No...
11. The motorcycle does not start. I have no Spark. Part 2/3. Verifying inputs to the CDI.
• Verificando entradas a...
12. The motorcycle does not start. I have no Spark. Part 3/3. How to check PICK-UP (Pulses).
• Cómo comprobar PICK-UP...
13. I put a gear and the bike stops. How to check the kickstand sensor.
• 13. KYMCO VENOX. Meto ...
14. Checking the charging system.
• 14. KYMCO VENOX. Compr...
15. How to tension and grease the drive chain. Putting new spark plugs.
• 15. KYMCO VENOX. Cómo ...
16. Weird sound in the engine. How Pierre helps me in the distance. Timing chain tensioner?
• 16. KYMCO VENOX. Sonid...
17. What is the BENDIX or STARTING CLUTCH of the motorcycle and how to repair it step by step.
• Qué es el BENDIX o EMB...
18. Replacing the cable and the cap (pipe) of the high and verification coil.
• 18. KYMCO VENOX. Susti...
19. Weird engine sound SOLVED !! changing the timing chain skid.
• 19. KYMCO VENOX. Sonid...
20. How to adjust the front cylinder timing.
• 20. KYMCO VENOX. Cómo ...
21. Synchronizing carburetors.
• 21. KYMCO VENOX. Sincr...
22. How to change the air filter, install its box. Install tank and saddle.
• 22. KYMCO VENOX. Cómo ...
23. How to change the engine oil and its filter.
• 23. KYMCO VENOX. Cómo ...
24. How to change the oil in the front forks.
• 24. KYMCO VENOX.Cómo c...
25. How to grease and adjust the steering.
• 25. KYMCO VENOX. Engra... - Auta a dopravní prostředky
Quiza el diametro inferior sea algo superior, la verdad nunca e desarmado la dirección de la venox, pero que puedo decir excelente aporte jose tu canal lejos el mejor de mecanica
Gracias por el comentario Cristóbal. Un saludo.
tengo que comentarte que compre una piña completa y dichos rodamientos vienen las bolas sujetas a una pieza de plastico y queda como un aro con las bolas dentro osea solo seria colocarlo como una arandela llena de bolas en los 2 rodamientos.
Gracias por la info. Un saludo.
buen día con cual modelo de honda es compatible los rodamientos de la direccion
Hola como puedo ponerme en contacto contigo por un problemilla con un miniquad
Buenas tardes, no encuentro el enlace de las bolas de los cojinetes, ¿podrías facilitarlo? gracias.
Desconozco donde lo `puede conseguir. Yo para la Venox todo lo compro en el servicio oficial Kymco. Un saludo.
Buenas tardes, de que año es tu venox? la mia es del 2003 y parece tener los mismos cojinetes con los rodamientos sueltos, pero todos los kits de internet vienen con los cojinetes enganchados por collar y las pistas son diferentes, y me resulta imposible encontrar recambio. Gracias de antemano.
La mía es del 2003 igualmente y yo los recambios de esta moto los compro en el servicio oficial Kymco. Un saludo.
Hola buenas, te comento tengo un problema con la dirección que consiguen resolver, e cambiado la dirección las bolas y todo , pero la dirección se a quedado muy dura, pero si lo aflojan se queda con mucha holgura manillar, que debo apretar la tuerca y la cotratuerca por igual , si me puedes ayudar te lo agradecería muchas gracias un saludo ✌️
Eso es porque no está bien instalado el conjunto de bolas y pistas. A mi me tuvo loco mucho tiempo. Yo de ti intentaría buscar unos rodamientos de dirección compatibles con esa moto pero que fuesen de agujas o cónicos. Un saludo.
Y no pude ser que sean 19 arriba y 19 bajo ??
Es raro que si son del mismo diámetro sean diferentes arriba que abajo.
Es que no son del mismo diámetro. El diámetro de abajo es mucho mayor que el de arriba. Un saludo.