Love your videos and passion for the hobby, thanks for getting grubby and cold for our enjoyment 😆, It's good to know there are other big kids in this world.
Yeah the Maxx is one tough truck, not sure if I would drowned mine like that, but that's the great thing about R/C I can drive mine how I wish, then I can watch everyone else on you tube drive how they wish....👍👍
Out here in Washington, I've been using your washing technique on my trucks because it's been wet and soggy for probably the last 6 months. The air compressor gets a workout and my wife has gotten used to having crawlers or my 6S EXB Kraton sitting on our heater registers after an outing 😂
Forsure I've been doing same using the maxx for this wet cold winter . If I can make throughout winter its free fun . Ofcourse we try spray bearings afterwards but using everyday its only a matter of time
I only run my Maxx in the mud. No bearing or tire issues because I know what to do, but I have ripped a rear knuckle off while attempting to power out of some sticky mud.
What do you do after running the car in those conditions? A quick blow is no good surely .can you show us what to do after this sort of driving,thanks again for a great video your enthusiasm for the hobby is brilliant,ps every time I drive my cars like this they are seized up solid the next day thanks again for the great work..
I have a cleaning video on here somewhere. I literally just wash it off with water and blow it off with air. Then I set it in front of a vent or in a small room with my dehumidifier. I don’t use any chemicals on it.
Is this running on 4s or 3s please? Think that’s an awesome idea. So far you had me buy Erevo 2.0, Maxx V1 and the V2, and also the Hoss, now I wannna try the big tyre set up on the Maxx, I already have a set of Proline Badlands 3.8s to try out on it firstly then see how it goes, but will need to change spur and pinion as in your video. Thanks in advance. Wicked entertainment 😁👍🇬🇧
I suppose it’s not the end of the world to put it in the mud and water as long as you take the time and clean it properly afterwards. I think I might prefer paddle tires over fling King’s .I’m not sure
Love your videos and passion for the hobby, thanks for getting grubby and cold for our enjoyment 😆, It's good to know there are other big kids in this world.
No problem!
Can’t believe that you didn’t break anything… fun to watch 👍👍👍
This thing is a beast!
Mud bogging! Awesome video with lots of great shots.
Verry good action movie!
I like to see another wan next week 😀
Sometimes you just have to say F*** it and drive it like you stole it Great vid 🤜🏻🤛🏻
Only way 💯
Maybe I did steal it!
Yeah the Maxx is one tough truck, not sure if I would drowned mine like that, but that's the great thing about R/C I can drive mine how I wish, then I can watch everyone else on you tube drive how they wish....👍👍
Well, I gotta have a couple to play in the rain with. It kinda sucks to have it rain and I can’t take an RC out.
That vid was epic! Makes you realise how water proof they are :)
Best maxx video I seen yet.
Older video that got by me but I got to tell you I'm sure somebody got wet recording that one hats off to you brother!
6:12 The Traxxas Submarine is pretty cool. xD
Enjoyed every minute of that… your just one big kid… greetings from Scotland 🏴
Thanks! My ancestors are from Scotland.
That was fun! Greetings from 🇨🇭
Another awesome video
Your a madman!
Out here in Washington, I've been using your washing technique on my trucks because it's been wet and soggy for probably the last 6 months. The air compressor gets a workout and my wife has gotten used to having crawlers or my 6S EXB Kraton sitting on our heater registers after an outing 😂
Hola buen video podrías decirme ke marcas de ruedas lleva aver si me las pudieras poner en un comentario
😱🤭👏 fun fun fun 😁
Those tires rip :)
i drove mine in a creek sunk under water took me 10min to find. threw it up on a bank an drove fine.
I was going to try to make it across that huge puddle but I didn’t want to have to fish it out of there.
Awesome!!! You're gonna need a full rebuild and a few set of bearings after all that water! 😂
Forsure I've been doing same using the maxx for this wet cold winter . If I can make throughout winter its free fun . Ofcourse we try spray bearings afterwards but using everyday its only a matter of time
My yards even bigger mess if I wait for nice days I rarely rc . Its fun just more maintenance
I only run my Maxx in the mud. No bearing or tire issues because I know what to do, but I have ripped a rear knuckle off while attempting to power out of some sticky mud.
💪💪💪💪💪
What do you do after running the car in those conditions? A quick blow is no good surely .can you show us what to do after this sort of driving,thanks again for a great video your enthusiasm for the hobby is brilliant,ps every time I drive my cars like this they are seized up solid the next day thanks again for the great work..
I have a cleaning video on here somewhere. I literally just wash it off with water and blow it off with air. Then I set it in front of a vent or in a small room with my dehumidifier. I don’t use any chemicals on it.
Is this running on 4s or 3s please? Think that’s an awesome idea. So far you had me buy Erevo 2.0, Maxx V1 and the V2, and also the Hoss, now I wannna try the big tyre set up on the Maxx, I already have a set of Proline Badlands 3.8s to try out on it firstly then see how it goes, but will need to change spur and pinion as in your video. Thanks in advance. Wicked entertainment 😁👍🇬🇧
Thing is bad a$$. Bet it would be awesome in snow like that too.
Like a perfect mud bog pit nice
I suppose it’s not the end of the world to put it in the mud and water as long as you take the time and clean it properly afterwards. I think I might prefer paddle tires over fling King’s .I’m not sure
They don’t make paddle tires that look like this and fit the Maxx like this. I love these tires.
New to hobby this year. How did 2085x servo upgrade treat you?
Which compound are your Fling Kings?(I see the offer different ones) Any chance you could provide a link to where you bought them?
Hello love your videos sir ! How has the upgraded Xmaxx servo been holding up ? Is it faster or just more torque? thank you so much 😊
I hope you enjoyed the cleaning as much as we enjoyed the watching! 😂
Nah rc will be clean its the bearings that suffer
Maxx is my water mud truck too.. just going need bearings by end season
Do you have to do a full strip down after that much water, or just a blow and dry
I just wash it off, blow it off, and dry it with a dehumidifier in a small room.
@@outsourcedrc Did you get a lot of bad bearings?
Rip it through the water next time with some paddle tires. I like to see that
I don’t have any. I wish they had some the size of these Fling Kings.
Did you use a drill bit to drill into the holes or the copper pipe trick??
I used brass tube
@@outsourcedrc 4mm?
1/8th inch
So awesome but those poor bearings 😝
There is nothing wrong with those bearings. It’s the WD40 that people clean their bearings with that does all the damage
Any issues with those tires coming unglued ???
Much much do you clean yours up after a good water bashing?
I just clean it like I would normally. I use a dehumidifier to help it dry
Do you have any kraton 8s that you have videos on
I don’t have any of the Arrma 8a
Water cooled motor and esc