BMW E36 328i *TURBO* M52 walk around, and dyno tuning session @ E36Tuning.co.uk
Vložit
- čas přidán 16. 03. 2021
- You asked for it.. so here it is, a full detailed walk around of everything we've done to turbocharge our E36 M52 328i. We go into the nitty gritty of what we've changed, why and how we've tuned it and made it work on the stock Siemens MS41 ECU.
E36 Tuning Guide: www.e36tuning.co.uk
K64 Performance: k64performance.com
Sorek's "Logger.S" as shown in the video: www.ms4x.net/index.php?title=...
The second part on the video goes into tuning on the dyno, with some final power runs at the end of the video!
The vehicle in question is a 20+ year old BMW E36 328i powered by the trusty old M52 2.8l engine.. it's oily, dirty and has over 130k on the clock, but we installed a K64 performance RHD manifold, and downpipe with a whopping GT35 Chinese turbocharger.
The full spec is:
BMW E36 328i
K64 Performance RHD manifold, and downpipe
Chinese GT35 Turbocharger
In house exhaust system
Stainless boost pipes
Large front mount intercooler
Siemens DEKA 630cc injectors
Colder spark plugs
Modified MAF sensor wiring with 1.2k resistor inline
Innovate Wideband Lambda controller
Factory Siemens MS41 live mapped in house
Eibach springs
Bilstein Dampers
JC Racing 4 plate 'heavy duty' LSD with steel end plate
This setup is seeing a solid 300hp, 400nm with plenty left in reserve once we drop the compression, fit a better clutch and turn the boost up some more!
If you are interested in more content like this, like, subscribe and share!
#e36jp
#e36tuning
#BMW
#E36
#E36Turbo
#328i
#K64
#K64Performance - Auta a dopravní prostředky
Finally more UK based M52 content, looking forward to the next stage/s
We saw 320hp at 0.5bar and 340hp at 0.65bar on the 2.8.
Currently running a low boost Alpina 3.3 engine, 415hp at 0.5bar!
@@e36jp aren’t there limitations on the aluminium block in comparison to the iron (US version) block?
Keep up guys!! Great work !! Can't wait for next video :-)
Thanks so much! Please do like, and share!
Keep it up, we really need more e36 content out here! :)
Ok! Thanks for the feedback!
This man deserves more attention keep up the great work
Thanks... Just so very time consuming trying to get full length videos such as this out!
I am very happy Logger.S is useful to you!
Very good video, lots of information and tips regarding E36 turbo build!
Thanks so much! Any feedback is really appreciated!
for your first "full video" it was very very good , keep up posting this kind of good quality content. at this moment the chanel is very underated but it will grow. good job !!!
Thank you for the feedback, we will definitely put more content out like this! Please subscribe and share!
Great insight - well put together video, keep up the informative content. Definitely interested in seeing more of this 👍🏻
More to come!
Great video!
Lovely example e36! great info! 👌🤌👌
When the CZcams algorithm actually suggests quality content!!! Appreciate a dope channel like this one my new Estoril Blue 6266 Precision Turbo build video is being suggested through this video!!! New subscriber now!
Thanks for the great feedback!! We've been so busy over the last few months, I've just not had chance to do any more video projects!... watch this space though, another big one coming soon!
Great job! keep it up!
Thanks, will do!
very informative and entertaining, hope to be down with my 240 in the summer
Thanks very much! Please do share, like and subscribe - it all helps us in the quest to bring you more content like this!
Sweet videoo do B58 definitely really clear and comprehensive video cheers👏🔥
No problem! Thanks for watching!
keep the e36 content coming
Will do! Please like, share and subscribe!
Great video really informative👍 know where I'm bringing my e36 once it's boosted 👍
Class
Definately looking forwards to seeing how mine turns out which you've currently got in for tuning - Owner of the 330i Touring with a engine rebuild from Just Deutsch
Check out Allen Millyard’s heat shields he used on his Viper V10 bike. Basically NASA shuttle tiles.
Will you be putting a cat on this? Surely won't pass MOT? Also what software are you using to tune on the laptop?
By going head gasket spacer and stud kit how much power do you think is reliable on a nikisal engine I want to aim for 300whp
How much boost were you running to make 300bhp?
would this also apply to a e36 non vanos 325? Just to add, really good solid content, with the right amount of detail.
Very similar, yes... In actual fact; the VANOS doesn't make much difference in turbo application...
@@e36jp Thanks.. I have a supercharged (ESS) e46 330 engine, (well i have the entire car), that I was going to attempt to put into the e36 325 (my track car), Would this be easier, or any real issues (bar needing a loom adapter + throttle) for the e46 engine than going the route above?.. As 320-340 bhp in a stripped e36 should be quite quick around the track.. Thanks.
@@joper90 You've kinda got two choices... fit the whole lot into the E36, including MS43 ECU, electronic throttle etc (there are some benefits to this with low RPM throttle limiting etc), or fit the charger kit to the M50/M52 engine, and use the MS41 ECU which is meant for the E36.... Would love to see more on the car!
I think you should reinforce rear subframe, on these cars it often cracks with power!
Yes, it’s on the list of things to do!
Hi how much to flash my 328i m52 ECU for boost ?
How much would this whole remake cost for this engine?
Stock aluminium engine? Is the turbo genuine or replica?
Can you like permanently delete check engine codes on the emulator?
How much would you charge to fit something like this, just bought an e36 with an M52, M50 manifold and M3 box so keen to boost it in the future
Hi. We have a number of options for turbo fitting, we map quite a number of them for other engine builders / car fabrication companies too - lots of options around the UK!! You are best emailing us on info@dervtech.com for more info.
Thanks!
Hi there, just curious on how you managed to get the Wideband to work with the standard ECU?
Innovative has a narrow band simulator
@@drewdavis239 thank you
Would this build also work with a 97 e39 528i? Not sure if it’s the tu version and I know there’s not a lot of clearance in the e39’s
Yes, it should do... Is it single or twin VANOS?
The m52b28 is this with iron sleeves or Nikasil
or have you the number from the block
Stock Nikasil engine :-)
How much would this cost as I drive in out kit thanks
is uk m52 iron or alu ?
if you are in UK is it an iron sleeves block or nicasil coated?
This one is a Nikasil engine.
@@e36jp thanks for answer, mine is also nikasil in E39 which I want to turbocharge. Do you have any thoughts on Maxpeedingrods T3/T04e turbo or is it better to get a GT35 with external wastegate? I want to turbocharge completely stock engine
Would the m50 manifold mod make a big difference with it now being forced induction?
Was prob the best mod I did on my 323i but obvs that one N/A
You tend to lose a bit of spool, but pick up some at the very top end.
Stock manifold better, just up the boost 0.05bar on top for same m50 manifold efect 😄
Hey are you selling these builds? Would like have my e36 328i turbo'd by a reliable place and you guys seem good
Hi - sorry for the delayed reply. Yes, we are supplying / mapping full turbo kits here in the UK!! For more info, contact us at www.dervtech.com
Would a 728i be any different to set up than this?
Shouldn’t be… though some of later 5/7 series are twin vanos. Just more space! :-)
It is possible/problematic to have A/C in a turbo charged E36 ?
It’s a fair bit of work. But it’s do-able…
How much for a mapped Ecu for a turbo
Drop us a message via the Facebook page! We can certainly help out!
Hello friend as soon as you sell me copy of your map to intall it in my car
hurry up , im nervous
😂😂😂😂
@@razvantoma1510 - hope you enjoy! It’s the first of the “full length” videos we’ve done, and we hope you enjoy it!
Please help us grow the channel by sharing, and liking!!
@@e36jp yes sir
i curently have an e36 328i full stock and i am looking for m3 exhaust manifold , s52 cams and m50 intake manifold, maybe after i finish it ( 1 month i will say) you can help me tune it via teamviewer . anyway , thank you for the content you provide. ✌️
@@razvantoma1510 no problem! Let us know once the car is finished and we can happily take a look!
Great for a you tube vid but stuff like this never last long, you wont see it in 80* weather idling in a 3 hr traffic jam that's for sure LOL..Dyno readings are not the real World
This car actually has been used as a daily, through summer and winter. We turned it up further on the stock 2.8 and it never missed a beat at 340hp.
The engine has now been taken out to 3.3l and runs over 450hp. No problems in stationary traffic, and has been used on 30c summers days without issue….
@@e36jp Any vids of you beating the shit out of it round a track?
That’s not a m52! It’s a m50 engine