My boy asked for a sling. I threw in a little stock mod. Don't miss out! Or maybe miss out, what do I know. ----- Music: How It Began & Last Horizon (Silent Partner)
Watching someone work out physics equations in imperial is one of the most terrifying things I have ever seen. I feel like I'm walking away from a murder scene
I’m somewhat jealous. My Korean Conflict, Marine Corps sergeant father would never allow me to have a BB gun. However he did get me an Ithaca model 49 single shot 22 for Christmas my 7th year along with many hours of his personal instruction on gun safety as well as proper use. His opinion was that BB guns encouraged kids to shoot at things that they shouldn’t. In my opinion the single shot made me a more deliberate and accurate shooter. My next weapons were a model 88 Winchester lever action 308 and a model 700 BDL Remington 7mm mag so the idea of one shot, one kill, stayed with me. Although I was right handed I was born with extremely limited vision in my right eye and God provided me with a left handed father to teach me to shoot. As a friend used to say “I was born right handed but I overcame it”. Dad’s been gone now for nearly two decades and I surely do miss him.
the only good thing about airguns is ammo really.. 500 shots for $2.60 lol and they're arm some airguns that can be pretty high on the fps/energy line.... my crosman 2289g pump up .22 is modiflied heavy, breech, barrel and valve all changed out to make it shoot 17 grain pellets at 1600 fps :-) and yes its technically registered in Canada as a firearm, but shhh I hated the pellets falling outta the air only 100 feet away... I shoot 400 yard targets lol (big property so no harm done right)
I grew up with extremely trusting parents. Taught gun safety at a young age and my parents even let me keep my guns in my room at age 7. Although i was always told if i was caught playing with them they would be taken away. And i never really ever touched them without permission and I didn't want to lose their trust. My first gun was a .22 then a single shot 20 gauge then a semi-auto shotgun then an SKS. There have been more but those are the ones i treasure. I think teaching gun safety at a young age is essential i knew what a gun was and that it was not a toy. IMO you are more likely to have a child accidentally shoot someone or themselves if you shelter them away from guns. They should be taught the importance of gun safety and to never point it at anything you are not willing to kill or destroy and to always treat it as if it was loaded even if you think you know its not.
Christopher Hager hmm, I never thought about it that way. However I do think BB guns are a wonderful tool for teaching kids, or anyone for that matter, proper gun safety. Sorry about your father, they’re not there forever but man oh man, do they leave a big mark on your life even after they’re gone.
My Dad did the same! BB guns and slingshots were forbidden because boys will be tempted to shoot at each other. We had a model 49 for shooting with Dad but we had our own bows and arrows that we could shoot anytime. Dad cut the arrows down to fit. I remember bow shooting in the basement when I was in 1st grade.
I don't remember where I learned this, so I can't give credit. But for shaping the recoil pad, attach it to the cutoff of the stock, do your shaping there, then when it's done, attach it to the stock. The point where you cut the two apart is close enough to the same size that it will work fine. Love your videos Tony!
@@jackofmanytrades4396 a wattsecond. Or a 3,600,000th of a kilowatthour, if that is what the meter on your electric power line says. Or a newtonmeter. But don't ask me for footpounds, I'm German.
Tony, you bring a lot of happiness and some laughter into my life. I have some really hard days and some extremely hard nights and there’s no getting away from that right now. But your videos take me away from that and put me in your amazing space and helps me deal with everything. Thank you so so much for sharing your projects and your amazing humour with us all. I appreciate you and the work you do so so much. So thank you and so so much love from Ireland. ❤️❤️
That belt sander gouge is the story of my life. I’m so precise and particular throughout the entire process of a project to just muck it up with a goof like that in the end. Totally useable and functions phenomenally, but kills me every time I see it.
*I got one of those guns when I was eleven. After about 5000 pellets my dad rehardened the spring with a butane torch, quenched it in oil and annealed the spring in mom's oven. My parents separated when I was eleven but I'm pretty sure it was because of lots of other things. Anyways, cocking the gun afterward was twice as hard and the pellets blew through my older brother's hidden beer cans. Something you might want to think about. Rehardening, not separation.*
I use to had a .177 spring rifle when i was 12 or 13 and I fired it until it could not pull-out pellets through the barrel, if I had know this those days...
I have an El Gamo "EXPO Junior" since I was a kid back in 1972. Last year I changed the spring and seal as they are still readily available here in Spain. It is in very good shape and still performs like the very first day. I've got very fond memories from this bautiful pellet gun.
6:20 Thanks for actually showing the full solving process! In particular, the conversion steps are especially helpful for those of us rusty on dimensional analysis.
When I make a flub like that sanding mark, I'll often follow it up by extending the "flub" to make it look intentional. In this case, I'd sand a strip all the way around the end of the stock before staining it, like it was a "design element." Then I'd say, "Yeah, I thought it needed some kind of transition between the original finish and the rubber."
Too simple for ToT. Machine a pocket, cast a small bronze plaque of his name, install plaque into pocket. I'm thinking a 5 part series on casting should do the trick.
That barrel attachment you made could probably be reused to attach a wimpy laser to the air rifle I’ve heard that being “tacticool” is the new hip or whatever they say
Tony, let's talk seriously about you doing a feature length movie on home hobby machining. I think it'll be a hit at Cannes, do you own a tuxedo? Have your people call my people, caio baby!
The TOT channel is the gift that keeps on giving. I came here for the machining. Then you roll out air rifle stuff. I love air rifles! Then motorcycles...love motorcycles too. Welding? Yup, got a Tig in the shop. And finally there's humour. I love humour, no joke. The videos might not show up every day here but boy are they worth the wait. Love it.
It's amazing how far air rifles have come over the years. I had a good old Crossman BB gun and a RWS pellet gun that was dead accurate. But now they've got big bore stuff that's incredible. I know a guy who shoots coyotes with one they're so powerful. It makes my Crossman look like a rubber band.
You are so brilliant in the workshop Tony, and clearly great at filming & editing too. I love your humour, so many awesome one-liners! "Don't look at me, that's how it was when I got it!" lol and "That's why we don't take paying customers!" just cracks me up so hard. Thanks for brightening my day AND teaching me some great skills. What you do with metal is just incredible. I reckon you could build a tank that actually works out of a huge lump of steel (project suggestion lol).
The last line is awesome. I thurily enjoy you videos and your presentation. As a jack of all trade and master of none I am learning to machine with my little Atlas lathe and my (ya I know) round column mill, (abet more a drill). You videos have helped me along they. Thanks.
Well, in most schools today if you tell the teacher your dads great for modifying a really cool pellet gun into a really cooler pellet gun, they’ll call CPS. I wish I was kidding/exaggerating.
Doesn't everyone count out their grain when they buy it? The place around the corner from me will even grind it for free! 1, 2, 3,... 34,992,34,993 "Almost done, the wife asked for 5lbs." 34,994, *Bump* Wheat berries pour across the floor "$###, sorry." 1, 2, 3...
@Tt Miller .38 SPC only takes a few grains (assuming you're using smokeless powder, though .38 SPC can be loaded with BP)... compare that to a 1# container of powder. You could load a couple thousand .38 SPC with 1# of powder.
Subscribe - and CZcams will send you a notification every time he uploads something new. Why did you think he keeps sneaking "SUBSCRIBE" into the vids? LOL
@@OriginalGriff Also click the little bell thing next to the Subscribe button then select All. CZcams tries to make it harder for us to find our favorite videos so we will watch their suggested kids videos that make more advertising $$$ for them.
I love your videos! I have a 10 year old son that struggles with the grammar and rules of school, but he's gifted with his imagination and building Intuition. He spends every moment he can in our farm shop tinkering, welding, torching, and machining. He LOVES your videos. Keep up the good work and fun making!
@ThisOldTony I see you use paper a lot to touch off parts. You have probably heard of this, but here is a slightly more accurate alternative: Take a .500" endmill or gauge pin, lower your tool to less than .500", then raise your tool until the endmill just rolls underneath it. Now you are exactly .500" over your part. Lower your tool .500" and you are exactly at zero (depending on the condition of your equipment and tools). You can really feel how close you are, and if you drop your tool even .0001" the endmill will stop rolling between the part and the tool. Hope this helps someone!
"That's why we dont take on paying customers" love it lol You've inspired me to get into some hobby machining. I've got some parts I'd like to prototype and I dont feel like paying others to do the work. I like instant gratification too. I want my parts as soon as possible lol Keep it up TOT!
As a gunsmith and a blcksmith (REME british army ) and college edjumicated , yes we have a college for blacksmiths in the UK ) i commend you sir , not a bad effort at all lol
I just love watching you machine stuff. I was a tool room machinist for many many years, and used so many of the tools you use. Square collet holders, slitting saws, dividing heads. Man I miss that stuff. It gives me warm fuzzies to see it close up and in action again. It was so rewarding at the end of the day to stand back and say “yeah, I made that”
there are times when i feel guilty, watching such talent unfold on the internet medium, At those times i feel a sense of opulence, the way students following Socrates must have felt when listening to the teacher. this is a long way of saying, your videos are richly entertaining. thank you!
Oh my gosh, I love your videos so much. Your sense of humor tickles me something fierce. When you did your 10-shot group, oh my goodness. Simple time-saving editing, but how you present it is phenomenal, and you do this consistently throughout all your videos. I love your humor and how you edit. Nothing short of brilliant... or insane, pretty hard to tell the difference between the two sometimes.
Love the magnet trick at 10:57!! Been a machinist since 2004 and never have I used a magnet... 🤦🏻 I was once told the Marines shoot with accuracy through volume. So 1 tin can for 1000 rounds is on par. I have a Ruger air hawk elite and it is fun. The open sight hold about 1” at 50 yards and the scope 2” at 50 yards because of play. Been thinking about making a barrel mount pistol scope rather then the breach mount.
When you have to blend in color at trick I have used is earth pigments and a can of spray lacquer. Choose some close colors. Spray a light, blocking coat ( also can be done with premixed shellac thinned 4 to 1 with alcohol) to prevent too much absorption. Mix your first wash color to match your adjacent color but not darker. These I would mix on a small plastic artist pallet ( the type that has the shallow indents around the perimeter with a mixing area in the middle). Apply the color sparingly, I often used an airbrush but a fine artist brush could work. Color the area. should be lighter or equal in tone but I have never hit it perfectly because of the absorptive nature of the surface and the base material influences the wash. let dry or use hot air to dry. Apply a mist of spray lac. Dry. Mix a color for correction/addition. Repeat. build-up to the desired color. with a very fine brush and darker tone, you can draw in grain and rays. when finished and it's dry, topcoat with your libation of choice. Poly is like plastic so it doesn't feather well. You can just use the spray Lac in layers . in this case whatever was used on the original might be best. Once hard steel-wool the area to bring it to a matte sheen (again based on the surrounding finish) the apply paste wax, then buff with a soft, clean cotton cloth. I know this may be a bit overkill for an inexpensive air rifle but better to practice on something like this than try it out on the dining room table for the first time.
You senior are one hell of a craftsman and a maker of all sorts of stuff. You have one hell of a collection of tools. Keep on trucking with these great videos.
I think I can conclude, if I ever had to figure out the energy of something to save my life... I would die a horrible and gruesome death. Where those "math words" even in English? Um.. 4 quarters equal $1! Take that! You evil math do-er!
Seeing you do all those tool changes to make this tiny part should really send it home, that you need more power equipment so you do less tool changes.👍
never been into machining but your channel is just pure gold. I can't believe I've been missing out on this stuff until now. a good backlog of videos is great though
I am a new sub ,, you are funny as hell and I am going watch as much as I can for the next two hours have a great day bro 😎 much respect from Hamilton Ontario Canada 🇨🇦 ✌
I absolutely adore this channel, good job man, this quarantine has got me depressed since my ds4 broke. I've only been able to use my phone, and I discovered this channel, been helping me chug along.
I just discovered this channel. Wow, a well done video. My brother is a machinist and I've worked with molds and carved stone (so I know a bit about shaping things), even did a bit of black smithing so this is really interesting and, bonus, entertaining!
@@jamesgardner2101 And used seventeen conversion factors in the calculation to arrive at the final energy unit... I guess what doesn't kill you makes you strong. Still ridiculous to anyone doing real engineering.
Ohhhh I'm liking this episode already, love the magnet trick to catch the stock falling from the lathe too, never seen it, surprisingly so simple and I never thought of it
I don’t even know how to machine or understand half of what’s going on but man do you make it so interesting and entertaining to watch, I actually catch my self laughing at the jokes to keep it up man !!
Watching someone work out physics equations in imperial is one of the most terrifying things I have ever seen. I feel like I'm walking away from a murder scene
Apart from the unit conversion, is the math any different?
@@sryth1 yes you have to sell your soul to do physics in imperial
@@sryth1 No. But that doesn't make it okay.
Who are you all, pretending imperial is bad?
@@Mister_____B3_______________B3 because it is
Hello Police? Yes, he is doing math again, and he is using the imperial system the monster!
Oi mate, you got a license for that math
Joe Terpstra Maths*
Eric H it’s different in the US. They call what we call “maths” “math”.
@@joeterpstra6175 it's just me toast
@@randomgoat2272 because y'all added the S bec@use it's mathematicS
I’m somewhat jealous. My Korean Conflict, Marine Corps sergeant father would never allow me to have a BB gun. However he did get me an Ithaca model 49 single shot 22 for Christmas my 7th year along with many hours of his personal instruction on gun safety as well as proper use. His opinion was that BB guns encouraged kids to shoot at things that they shouldn’t. In my opinion the single shot made me a more deliberate and accurate shooter. My next weapons were a model 88 Winchester lever action 308 and a model 700 BDL Remington 7mm mag so the idea of one shot, one kill, stayed with me. Although I was right handed I was born with extremely limited vision in my right eye and God provided me with a left handed father to teach me to shoot. As a friend used to say “I was born right handed but I overcame it”. Dad’s been gone now for nearly two decades and I surely do miss him.
the only good thing about airguns is ammo really.. 500 shots for $2.60 lol and they're arm some airguns that can be pretty high on the fps/energy line....
my crosman 2289g pump up .22 is modiflied heavy, breech, barrel and valve all changed out to make it shoot 17 grain pellets at 1600 fps :-) and yes its technically registered in Canada as a firearm, but shhh I hated the pellets falling outta the air only 100 feet away... I shoot 400 yard targets lol (big property so no harm done right)
I grew up with extremely trusting parents. Taught gun safety at a young age and my parents even let me keep my guns in my room at age 7. Although i was always told if i was caught playing with them they would be taken away. And i never really ever touched them without permission and I didn't want to lose their trust. My first gun was a .22 then a single shot 20 gauge then a semi-auto shotgun then an SKS. There have been more but those are the ones i treasure. I think teaching gun safety at a young age is essential i knew what a gun was and that it was not a toy. IMO you are more likely to have a child accidentally shoot someone or themselves if you shelter them away from guns. They should be taught the importance of gun safety and to never point it at anything you are not willing to kill or destroy and to always treat it as if it was loaded even if you think you know its not.
Christopher Hager hmm, I never thought about it that way.
However I do think BB guns are a wonderful tool for teaching kids, or anyone for that matter, proper gun safety.
Sorry about your father, they’re not there forever but man oh man, do they leave a big mark on your life even after they’re gone.
My Dad did the same! BB guns and slingshots were forbidden because boys will be tempted to shoot at each other. We had a model 49 for shooting with Dad but we had our own bows and arrows that we could shoot anytime. Dad cut the arrows down to fit. I remember bow shooting in the basement when I was in 1st grade.
@@chrisbennet6268 ya, it's like going from toy trains to driving a locomotive, one matters a bit more than the other.
I don't remember where I learned this, so I can't give credit. But for shaping the recoil pad, attach it to the cutoff of the stock, do your shaping there, then when it's done, attach it to the stock. The point where you cut the two apart is close enough to the same size that it will work fine. Love your videos Tony!
simple and genial! i would not have thought if doing that!
Cool! Thanks for passing it along.
Now you tell him!
@@bradleyweiss1089 Rumors of a youtuber time machine collab video in the works to fix that????
Every time Energy calculated in feet and pounds a physicist cries and an engineer starts shouting into a pillow
Zeppelin I just bite into the monitor and try to quench the sobs
And everyone who deals with physicists and engineers grins a bit!
But TiborasaurusRex gets "excited".
I still don't WTF a joule is... :-D
@@jackofmanytrades4396 a wattsecond. Or a 3,600,000th of a kilowatthour, if that is what the meter on your electric power line says. Or a newtonmeter. But don't ask me for footpounds, I'm German.
Real talk: I'm just here for the oiler noises.
Gets me
Every
Damn
Time
Sppoooooge
I had one of those the other day - in the bathroom. I blamed it on a ToT video that was playing in the next room. :-P
Yeah, next time I'm dressing a sandwich with ketchup I will feel like I'm preparing it for machining
Are we shite talking?
Tony, you bring a lot of happiness and some laughter into my life. I have some really hard days and some extremely hard nights and there’s no getting away from that right now. But your videos take me away from that and put me in your amazing space and helps me deal with everything. Thank you so so much for sharing your projects and your amazing humour with us all. I appreciate you and the work you do so so much. So thank you and so so much love from Ireland. ❤️❤️
great comment Draven, and you are not alone.
Draven, I hope this finds you doing well. Best wishes.
That belt sander gouge is the story of my life. I’m so precise and particular throughout the entire process of a project to just muck it up with a goof like that in the end. Totally useable and functions phenomenally, but kills me every time I see it.
“That’s why we don’t take paying customers”
Joe Mama
Could probably add: "This is why we can't have nice things."
@Wroger Wroger I can do that with a single drop of chamber oil in my Beeman RX-1.
You should check about " dieseling pellets" I think you will find it sure interesting.
Chears... great videos btw
*I got one of those guns when I was eleven. After about 5000 pellets my dad rehardened the spring with a butane torch, quenched it in oil and annealed the spring in mom's oven. My parents separated when I was eleven but I'm pretty sure it was because of lots of other things. Anyways, cocking the gun afterward was twice as hard and the pellets blew through my older brother's hidden beer cans. Something you might want to think about. Rehardening, not separation.*
Silky Steve I have the El Gamo from when I was a kid (jeez, it 40-ish years old). Great memories.
But why the bold text...
I use to had a .177 spring rifle when i was 12 or 13 and I fired it until it could not pull-out pellets through the barrel, if I had know this those days...
The clarification sentence at the end got me good 😂😂😂
I have an El Gamo "EXPO Junior" since I was a kid back in 1972. Last year I changed the spring and seal as they are still readily available here in Spain. It is in very good shape and still performs like the very first day. I've got very fond memories from this bautiful pellet gun.
Another use for the rotary table: To showcase tiny humans!
5:27 Would have been funny if you opened it again after that shot and a 12 gauge cartridge fell out 🤣
Or a 40mm recoilless...
or a 125mm tank gun
@@cursedcliff7562 What about a 152x547.5mm towed gun-howitzer M1955 shell?
@@princessdanica Did someone order a "Big Birtha" round? Just passing by, re-watching ToT shows.
I like the part where he did the stuff to the metal.
I liked the part where he's using tools.
The math part made my head hurt.
I liked the part with the part.
I like the singing and dancing
I like the part where he rubbed the wood
And at the end he shot the I out.
ToT is a living pun.
Best comment ever !!!
I would like, but it's maxed out at 69.
@@jonanderson5137 well how about that, it's now at 96!
nice
When Miles Davis retired to Canada, he started going by "Kilometers Davis."
1.609+ Kilometers Davis 😀
Guffaw!
That was a good one.
*Kilometres
And here, we witness the pinnacle of dad jokes.
6:20 Thanks for actually showing the full solving process! In particular, the conversion steps are especially helpful for those of us rusty on dimensional analysis.
When I make a flub like that sanding mark, I'll often follow it up by extending the "flub" to make it look intentional. In this case, I'd sand a strip all the way around the end of the stock before staining it, like it was a "design element." Then I'd say, "Yeah, I thought it needed some kind of transition between the original finish and the rubber."
I would have just cut it down another 3/8 " and gave to his younger brother.
As Miles Davis said, “It’s not the note you play that’s the wrong note - it’s the note you play afterwards that makes it right or wrong.”
@@SingularlyNaked 👍
it's not a bug it's a feature
When I do something that doesn't work out well, I just say it was an artistic decision.
File a flat spot in that scar and engrave his name there so it looks legit? lol.
Not a mistake, a feature!
^ true craftsmanship right there
Too simple for ToT. Machine a pocket, cast a small bronze plaque of his name, install plaque into pocket. I'm thinking a 5 part series on casting should do the trick.
that's usin yer noodle. Adds a bit of realism, too. Like a serial number. Might make him think twice before agreeing to go on that bank job.
Not a flaw, but a feature.
That barrel attachment you made could probably be reused to attach a wimpy laser to the air rifle
I’ve heard that being “tacticool” is the new hip or whatever they say
Tony, let's talk seriously about you doing a feature length movie on home hobby machining. I think it'll be a hit at Cannes, do you own a tuxedo? Have your people call my people, caio baby!
The TOT channel is the gift that keeps on giving. I came here for the machining. Then you roll out air rifle stuff. I love air rifles! Then motorcycles...love motorcycles too. Welding? Yup, got a Tig in the shop. And finally there's humour. I love humour, no joke. The videos might not show up every day here but boy are they worth the wait. Love it.
It's amazing how far air rifles have come over the years. I had a good old Crossman BB gun and a RWS pellet gun that was dead accurate. But now they've got big bore stuff that's incredible. I know a guy who shoots coyotes with one they're so powerful. It makes my Crossman look like a rubber band.
*kym copyriot* There's just no not pleasing you!
I hope he machines helicopters next!!! I love helicopters!!
"I love humour, no joke", I'm going to remember that one, maybe even put it on my tombstone. ;-)
@@AHustleIsLikeASideOfFries Yeah, I also liked it.
TOT: "That's what you get for being a show off".
Son: "Squirrels fear me".
Not for long though...
You are so brilliant in the workshop Tony, and clearly great at filming & editing too. I love your humour, so many awesome one-liners! "Don't look at me, that's how it was when I got it!" lol and "That's why we don't take paying customers!" just cracks me up so hard. Thanks for brightening my day AND teaching me some great skills. What you do with metal is just incredible. I reckon you could build a tank that actually works out of a huge lump of steel (project suggestion lol).
The last line is awesome. I thurily enjoy you videos and your presentation. As a jack of all trade and master of none I am learning to machine with my little Atlas lathe and my (ya I know) round column mill, (abet more a drill). You videos have helped me along they. Thanks.
Now all it needs is, “a compass in the stock and this thing that tells time”.
...with an indicator mark for when he is supposed to be home!!
That's a great idea!
This old Tony, "you'll never have a calculator in your pocket so you better learn math."
@Evi1M4chine i raise you a machinist calculator app.
Stubby as they may be, he has five calculators on each hand.
@@frankherring6253 am I the only machinist that actually counts on their fingers?
@@metalman6708 you still have fingers?
I am not a machinist, just a guy with machine tools. "That's ok" he says, "I'm not a paying customer"
I bet the boy goes to school and tells everyone about his wonderful dad!
Well, in most schools today if you tell the teacher your dads great for modifying a really cool pellet gun into a really cooler pellet gun, they’ll call CPS. I wish I was kidding/exaggerating.
how to get bullied 101
Remember there are 7000 grains per pound.
Making pound cake the most whole grain food readily available on the market.
🤦♂️🤦♂️🤦♂️ Varget does add a nice crunch to baked goods 😂
@@colsoncustoms8994
Ya got factor in bullet weight.
Doesn't everyone count out their grain when they buy it? The place around the corner from me will even grind it for free!
1, 2, 3,... 34,992,34,993 "Almost done, the wife asked for 5lbs." 34,994, *Bump* Wheat berries pour across the floor "$###, sorry."
1, 2, 3...
Tt Miller, That was my reaction the first time I found out too.
@Tt Miller .38 SPC only takes a few grains (assuming you're using smokeless powder, though .38 SPC can be loaded with BP)... compare that to a 1# container of powder. You could load a couple thousand .38 SPC with 1# of powder.
Surely a great video as ever but come on guys! No one to tell him that a rifle is always better with a CANON sling ??!
Another video like this and i am getting ballistic!
Yeah, but then he would have to paint the barrel white...
nope, a Panasonic sling!
I have money for a Zenith sling barely
Matthias Meiffred
You win, best comment ever. Just bummed I didn’t think of it.
You put your son on the welding table, didn't you? DIDN'T YOU!?
Classic TOT.
3:15...”big sister vaporizer”, 😂
I love This Old Tony content.
agree
He's getting too good at editing and quality of filming.
Finally, I've been refreshing TOT's page for days.
Subscribe - and CZcams will send you a notification every time he uploads something new. Why did you think he keeps sneaking "SUBSCRIBE" into the vids? LOL
They make a little bell just for that very issue.
@@OriginalGriff Also click the little bell thing next to the Subscribe button then select All. CZcams tries to make it harder for us to find our favorite videos so we will watch their suggested kids videos that make more advertising $$$ for them.
CZcams is not issuing notifications for videos that poke fun at procreating with a wire brush
I'm way faster at clicking than a notification
I love your videos! I have a 10 year old son that struggles with the grammar and rules of school, but he's gifted with his imagination and building Intuition. He spends every moment he can in our farm shop tinkering, welding, torching, and machining. He LOVES your videos. Keep up the good work and fun making!
Almost closed my browser at that "udder tangent" pun
"That's what it was like when I got it."
Lol
What a family classic "Getting homemade spring out of your carpet"
The amount of dad jokes in this video just got you a new sub. Love it.
I always apreciate that you take your time to convert to metric units for your viewers! 👍
@ThisOldTony I see you use paper a lot to touch off parts. You have probably heard of this, but here is a slightly more accurate alternative:
Take a .500" endmill or gauge pin, lower your tool to less than .500", then raise your tool until the endmill just rolls underneath it.
Now you are exactly .500" over your part. Lower your tool .500" and you are exactly at zero (depending on the condition of your equipment and tools).
You can really feel how close you are, and if you drop your tool even .0001" the endmill will stop rolling between the part and the tool.
Hope this helps someone!
I use a 1" gauge block and slide under the tool. Same concept, though.
Ave doesn't want to talk about that kind of accuracy.
I just got “chicken butt’d” by a video... damnit TOT
Chicken Butt'd > Rick Rolled.. 😉
Had to give myself and my girls the rule to never "chicken butt" mom.
“Next, I’m going to”
*Immediately proceeds to*
I really hate the 30 second monologues about what people are about to do. Tony gets me.
"That's why we dont take on paying customers" love it lol
You've inspired me to get into some hobby machining. I've got some parts I'd like to prototype and I dont feel like paying others to do the work. I like instant gratification too. I want my parts as soon as possible lol
Keep it up TOT!
Kids always get blamed for wrecking Dads stuff, TOT it's the opposite - Gun butt scratcher
As a gunsmith and a blcksmith (REME british army ) and college edjumicated , yes we have a college for blacksmiths in the UK ) i commend you sir , not a bad effort at all lol
@@ManwithaCat "The stars of the beer" ?
@@Edgunsuk “The Moose To The Stars”?
@@vaalrus Stars To The Neck?
I just love watching you machine stuff. I was a tool room machinist for many many years, and used so many of the tools you use. Square collet holders, slitting saws, dividing heads. Man I miss that stuff. It gives me warm fuzzies to see it close up and in action again. It was so rewarding at the end of the day to stand back and say “yeah, I made that”
Just found your channel, I love the content! Thanks for all the insight and creative thought you provide.
5:59
"Shouda done this in metric"
Literally everyone as soon as physical calculations are involved.
10:55 that magnet trick is genius.
That whole calculation would have been half as long if he'd done it for Joules from the start lol
@@ska042 We don neeed no stinkn jewels...
@@larryfisher7056 Just use Nm instead of Joules so :-P...
Cool, the filing machine. Havent seen that for a while.
there are times when i feel guilty, watching such talent unfold on the internet medium, At those times i feel a sense of opulence, the way students following Socrates must have felt when listening to the teacher. this is a long way of saying, your videos are richly entertaining. thank you!
Oh my gosh, I love your videos so much. Your sense of humor tickles me something fierce. When you did your 10-shot group, oh my goodness. Simple time-saving editing, but how you present it is phenomenal, and you do this consistently throughout all your videos. I love your humor and how you edit. Nothing short of brilliant... or insane, pretty hard to tell the difference between the two sometimes.
Judging by the way your brain works I’m picking Mrs TOT appreciates the time you spend in the workshop🙂
Nice to see that at 0:04 tonys starting to save his karate chops and starting to use the actual saw
It's a balancing act between keeping in shape and not wearing out the joke (and the saw, i presume).
I don't think that works on rubber, just steel.
Best Dad joke ever... "Guess what?" My kids groan at this one every time. Well played!
Luv it...
Flat bottom holes make the ROCKING WORLD GO ROUND
Queen😁
TONY. My mom ate an apple like that one guy at the steel mill. I am now scared for my life.
Run.
I think it might have caught on after Tony's video as a way to intimidate people. I, for one, use it all the time.
I did it once, my boss doesnt even question me anymore.
I always do :)
@@Valentin-vs6ev
That's the proper way to eat an apple! :D
" don't look at me that's what it was like when I got it." I've had to use this line before.
Always blame the DPO (D@MN Previous Owner)
I'm a new subscriber, I been binge-watching your videos for 3 days now, you're like the Morgan Freeman of fabrication. I can listen to you all day!
Love the magnet trick at 10:57!! Been a machinist since 2004 and never have I used a magnet... 🤦🏻
I was once told the Marines shoot with accuracy through volume. So 1 tin can for 1000 rounds is on par.
I have a Ruger air hawk elite and it is fun. The open sight hold about 1” at 50 yards and the scope 2” at 50 yards because of play. Been thinking about making a barrel mount pistol scope rather then the breach mount.
In my mind that whole math sequence sounded like AvE quality BS jargon
We just need someone who’s bigly clever to tell us if it’s real or not
@@uhhhhh262 im not bigly clever but it is correct
@@uhhhhh262 It was correct. Well, it was until some semi-recent changes in our educational system.
ToT is bigly smarter than I in this case...
@@uhhhhh262 If you do the sane thing and just convert the velocity to metric, the end result checks out at least.
The auto-generated captions interpret the machining sounds as "applause"...
I'll take it!
@@ThisOldTony Well, I can't say I'm not applauding your milling!
And it usually interprets running internal combustion engines as (Music).
Can't argue too much with that.
Very cool! Love this channel I just found and it and can't stop watching it now!
"Utter tangent..."
Immediate like.
When you have to blend in color at trick I have used is earth pigments and a can of spray lacquer. Choose some close colors. Spray a light, blocking coat ( also can be done with premixed shellac thinned 4 to 1 with alcohol) to prevent too much absorption. Mix your first wash color to match your adjacent color but not darker. These I would mix on a small plastic artist pallet ( the type that has the shallow indents around the perimeter with a mixing area in the middle). Apply the color sparingly, I often used an airbrush but a fine artist brush could work. Color the area. should be lighter or equal in tone but I have never hit it perfectly because of the absorptive nature of the surface and the base material influences the wash. let dry or use hot air to dry. Apply a mist of spray lac. Dry. Mix a color for correction/addition. Repeat. build-up to the desired color. with a very fine brush and darker tone, you can draw in grain and rays. when finished and it's dry, topcoat with your libation of choice. Poly is like plastic so it doesn't feather well. You can just use the spray Lac in layers . in this case whatever was used on the original might be best. Once hard steel-wool the area to bring it to a matte sheen (again based on the surrounding finish) the apply paste wax, then buff with a soft, clean cotton cloth. I know this may be a bit overkill for an inexpensive air rifle but better to practice on something like this than try it out on the dining room table for the first time.
So by annealing a piece of steel,
Theoretically will make the steel mad. Because you said it lost its temper. 😂 LMAO
Great one!
#etymology
You senior are one hell of a craftsman and a maker of all sorts of stuff. You have one hell of a collection of tools. Keep on trucking with these great videos.
The humourous anecdotes alone make these videos worth watching in my opinion!!😁
Tony has a hell of a community. I started the video as soon add I got the notification and there were already 180 views, 85 likes, and ten comments.
All bots, some of them even write's comments, how many views before them.
22K views - 49 minutes ago
Time Zones - GMT+1
This Old Tony. Putting kids on turntables since 2020.
You're legitimately the only channel that constantly gets me to literally lol (laugh out loud)
What a great dad you are. Your kid is very lucky to have a dad that can make and or fix things like you can. Great video, really enjoyed it.
Tony has to be the coolest dad ever. Thank you for the videos dear Tony!
It'd be a tie between ToT, the Tech Ingredients guy, Mark Rober, and Matthias Wandel..
Imagine the project a multi co-lab of these 4 would produce!
"Hopefully it doesn't split the plastic...." Splits wood. 🤣 I feel for you. Truly.
Absolutely love the rye sense of humor. Love this (old) guys ...shop talk......if I was drinking absolute(ly).
Is it just me or do these vids just keep getting better :)
I think I can conclude, if I ever had to figure out the energy of something to save my life... I would die a horrible and gruesome death. Where those "math words" even in English?
Um.. 4 quarters equal $1! Take that! You evil math do-er!
his fault for not converting the velocity to meters per second. simplifies it significantly
aidanrocks13able I know right 😆 I think he did it that way to make it needlessly complicated
Ill match your 4 Quarters with ....( MUSICAL SUSPENS SOUND DUM DUM DUM) 20 nickels!!! and then something something big words 100 pennys!
Seeing you do all those tool changes to make this tiny part should really send it home, that you need more power equipment so you do less tool changes.👍
never been into machining but your channel is just pure gold. I can't believe I've been missing out on this stuff until now. a good backlog of videos is great though
I am a new sub ,, you are funny as hell and I am going watch as much as I can for the next two hours have a great day bro 😎 much respect from Hamilton Ontario Canada 🇨🇦 ✌
I still have a pair of safety mcglarses with a chunk of cutoff wheel embedded in one of the lens. Keep it on display in my garage.
Orppranator, hopefully where everyone that walks in can see it!
"Udder tangent" LMFAO
Excellent production, overall one of the best channels out there for content and entertainment.
You're my new favorite maker. Love the sense of humor and the film style.
If Tony loved his child, he'd install a picatinny rail, a bipod and a red dot.
That's so funny, I just spit beer! 🤣👍🍻
"This is why we don't have paying customers". Yeah. And this is why we can't have nice things. =0)
I absolutely adore this channel, good job man, this quarantine has got me depressed since my ds4 broke. I've only been able to use my phone, and I discovered this channel, been helping me chug along.
I just discovered this channel. Wow, a well done video. My brother is a machinist and I've worked with molds and carved stone (so I know a bit about shaping things), even did a bit of black smithing so this is really interesting and, bonus, entertaining!
They grow up so fast, he's already got a whole machine shop and a family
6:00
finally he gets it
Nah. Should have used the mass of the pellets in real measurements.
@@jamesgardner2101 And used seventeen conversion factors in the calculation to arrive at the final energy unit...
I guess what doesn't kill you makes you strong. Still ridiculous to anyone doing real engineering.
Ohhhh I'm liking this episode already, love the magnet trick to catch the stock falling from the lathe too, never seen it, surprisingly so simple and I never thought of it
Brilliant video Tony, many thanks for sharing!
The american calculations hurt my nordic eyes.
They hurt my American eyes as well...
Using S.I. units by default would have made this way simpler, if you consider that the chronograph was also able to measure meters/second.
@@thanos_d4151 yeah, why flick a switch, when you can do 15 minutes of pointless math, in an archaic measuring system.. amiright?!
Bah! Everybody knows the best energy units are barleycorn fathoms^2 per fortnight^2.
@@genelomas332 why use the language you are familiar with, when you can speak a different one that is different? Lol
Did anyone else go "Oh shit I forgot about the filer" when they saw it?
Barreled Squid I said WTH is that? Haven’t seen it previously. Is that Tony-made or a production tool?
I was actually thinking about the old die filer the other day
Why would you saw a filer ?😎
I like the service ticket system. I operated on that system, too. I always had a huge backlog of work. Make stuff, then make more stuff.
That Rock and roll per eagles to metric conversion was so painful :D I love the video, as always.
You could make some resettable field targets next. I'd love to see your take on that!!
When Tony was grinding the rubber I was like "He got skills, I would had messed the entire wood part if I did that myself"
Thx, always loved your videos and seen them multiple times
I don’t even know how to machine or understand half of what’s going on but man do you make it so interesting and entertaining to watch, I actually catch my self laughing at the jokes to keep it up man !!