How To: Frigidaire/Electrolux Top Burner Orifice 316237902

How To Replace: Frigidaire/Electrolux Top Burner Orifice 316237902 www.appliancepartspros.com/fri...
Symptoms: lost or damaged and the burner isn't burning properly.
Tools: penetrating oil, 1/4" nut driver, putty knife, ratchet with extension and 7mm socket, needle nose pliers.
This Frigidaire/Electrolux made Range Top Burner Orifice replaces the following older part numbers on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse Ranges: 891935.
Buy the new Range Top Burner Orifice 316237902 here: www.appliancepartspros.com/fri...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

[@rsvihla]

Can you replace the ignitor separately, or do you have to replace the entire burner/ignitor assembly?

[@rsvihla]

@Gus Cohen and @Archer Leland, you’re obviously the same person using two accounts to promote your PIECE OF CRAP software. Whoever you are, you’re a MORON.

[@pramoddesai3908]

Hi,
My Frigidaire gas range is all yellow flame and leaving soot on first 2 big burners. Remaining small burners on back are fine.
Could you please tell me if orifice are of same size for all burners or they are of different size for big burners and small burners. I have Frigidaire natural gas range oven.
Thanks!

[@flynncash8208]

instablaster.

[@leticiareyes2796]

Thank you!

[@appliancepartspros]

You are welcome!

[@shannontsosie3613]

Is this why, the flame is low and is getting lower?

[@ChristianMercadoAcevedo]

Can these be cleaned?

[@Mkx56]

Christian Mercado Most likely. But the purpose of this channel is to drive you to their website to buy the part. Just saying.

[@edwardj456]

Sure cleaning may help but after long use the orifice will wear away and not be round and properly tapered. I'd clean, check if not replace.