Killerplanes LEARN TO FLY RC WITHOUT A GYRO INTRO and Lesson 1
Vložit
- čas přidán 28. 03. 2021
- The Killerplanes LEARN TO FLY RC WITHOUT A GYRO series is here! In this video, we start you off with a load of information about flying an RC plane, with LESSON 1 included. Each of our lessons will include a whole LOAD of tips, tricks, and need-to-know information that was learned the hard way by pilots before you. Why learn the hard way when you can learn the easy way?
Our method of flying an RC plane is based on a simple principle, which is this: let your hand fly the plane! It's actually easy to learn the "MUSCLE MEMORY" technique of controlling a plane- all you need to do is follow our easy instructions, and then practice them on a simulator. We will show you how to acquire the necessary skills on your simulator, which will save you mountains of time and money spent repairing or replacing broken planes, and get you to fly like a fighter jockey with NO FEAR- it's all about having fun, and this is the way to get there! When you have completed the course, you will have all of the basic knowledge, and a lot of advanced knowledge needed to not only fly, but to feel comfortable and be in complete control of your plane, the natural way.
If you learn and practice these lessons, you will have NO NEED FOR A GYRO- indeed, you will be the gyro, and be able to do maneuvers with your plane that are not possible when it's under the control of a gyro or other computer-based controller. Why? Because the job of a gyro is to keep the plane flying straight and level, and that's not how planes fly- not even airliners! Planes MUST bank their wings to turn, and of course must point down to dive, or up to climb. When is the last time you saw a bird flying without doing those things? If you want to have the kind of control that a bird does, THIS is the way to acquire it!
So, have fun watching, and then have fun doing the lessons on your simulator. It will all lead to the immense feeling of satisfaction that can only be gotten from the freedom of flight! - Zábava
Joining the team . Love the Corsair .
I fly fixed and helis 3D, sometimes I get a sense of being in a plane, but really mostly it's visual cues of low portions of the wing or rotor disk it comes from many hours of consistent practice on the sim and at the field. Muscles don't really remember, your brain does of course, it starts as a slow thought skill with hesitation that gets faster with less
And less hesitation until the delay is almost non-existent.
Also, with fixed wing turns coming at you, moving aileron stick towards the low side wing, center gimbal is center of your wing.
Thanks so much Jeff S! Great tip!
Great to see you back on Steve!
Thanks! That's "almost on" actually- I don't think simulators really count. Got a few new planes that we have to video. Hoping for some nice clouds on a sunny day!
Steve’s back!!
KillerPlanes 🤜🏻🤛🏼
Halfway- now I just have to get Denise out to the field with some real planes!
Killer lesson. Glad to see you back at it.
Thanks! I truly believe that it's the ONLY way to fly RC planes and be comfortable and relaxed. When your hand knows what it's doing, there's nowhere near as much to worry about!
Great to see a new video
Thanks! More to come, too.
Nice to see you making a video again, hopefully you'll do more!
Thank you! It's great to be back!
perfect
Thanks! Tell everyone you see!
And I love the Thunderbird paint job on it so much
You mean the F-16, right?
@@Killerplanes yeah
Steve, if you're ever in Rockland stop in to Hudson Valley RC in West Haverstraw for a flight.
Love to! Aren’t you guys the ones on the landfill by the Hudson?
Nice to meet ya mate. Cheers form down under!!
Love to get down there one day- we need faster planes!
Great video Steve!!! Hope you are well, let’s get together again soon, thanks for sharing 👊🏼👊🏼👊🏼 and tell the Lovely Denise we said hello 😘
Thanks Jeff! Been training a pair of new German Shepherds, so we've been out of action for a couple of months, so far. (The Chase Crew sisters passed on a couple of years ago, but they live on in Yootoob!) So far, the new girls don't appear to be interested in planes. Bummer! We'll be back around pretty soon!
What Jeff said!
I wholeheartedly agree.
A few years ago I had Steve build a max-reinforced HawkSky for me, it saved me from buying “dozens” of new planes a hot glue gun was handy for some minor maintenance. But its still fun flying !!! Thinking about a biplane next. Something I can put an FPV camera on. Steve and Denise have been great to deal with !!! Thx 👍
THAT is good to hear! We just passed crash number 73 with the current Hawkfighter V8 test plane. It's getting a little wonky, but it still flies, with ALL the original foam parts. I'll bet that's a Guinness Record!
Balls to the walls actually refers back to the days of fly ball governor's. As the equipment speeds up the balls fly out....toward the walls and then closes valves to regulate speed. Depending of course on what type of equipment...so when you are wide open the balls are to the walls or balls out! Nice video!
Well...actually, (according to the dictionaries) nobody has found any earlier recorded use before AF pilots in Vietnam. Although Korean Vets claim usage, there's no record. I had thought it was from the WW2 era, but- not according to them!
A strong Corsair from you would be awesome.
We have them- we have kits (and installed versions too) for the DYNAM, FMS, DURAFLY, and FREEWING Corsairs that massively improve the strength- come and get it!
Hi Steve and Denise,
Nice to see a video, even if it's a simulator instruction. I need to get back to my simulator. Been years since I had some stick time. Do you have any of the FMS 1700mm P-47's? You both stay safe.
We actually have ONE of them that's partially reinforced, with other partially done upgrades. If you want it, you can have it for the regular price, but you'd have to finish the upgrades yourself! It's the green version, (bubbletop)
@@Killerplanes Hi Steve,
Sent an email to the one shown in the About. You and Denise stay safe.
What's up Denise?? did Steve go get a masters degree in teaching student rc aviation??🤣😃🥴😂🤓 kidding. Great to see?? hear you again!! Good stuff. AirHammer out!!
Working on an Associate's Degree in BS, followed by a Masters in "Almost Knows What He's Talking About", the famous AKWHTA degree you always hear about. Then I'm running for office. LOL
Are you folks closing Shop ?... I have not noticed any new FreeWing Jets on your website.
No, I’ve been busy doing prototypes for our first production plane, The Tiger Shark- it’s a Hawkfighter on steroids with a crash resistance guarantee- the way planes SHOULD be made!
@@Killerplanes ...yes, but I do not see any New FreeWing or FMS aircraft on your website for quite sometime ?
when I see guys crash unreinforced foam planes I just shudder
twisted and torn sadness
hence all mine are fully laminated with carbon rods where it counts- and I still make a project out of them at times
how did you sneak this video in unawares
Me too! I haven’t flown an unreinforced plane in 10 years, so it does make me wonder why everyone isn’t the same way- I still have every plane I have reinforced, including all the ones we crashed in videos. I do love stuff that works!
Hey Steve, great to see you back :) Are you still selling any of used planes?
yes- we still have some of the stars of our videos. Are you local to New Paltz?
Yes I am…..I’m a prior customer and I took one of your semi private lessons back in 2012 …Can you send me a list of
What’s available:)
@@zapatasgarage9006 wellll...there are about 80 planes on the racks,. so I don't have time to list them. Drop us an email to killerplanes@gmail.com
This simulator looks really nice. What sim is it?
Enzo- it’s the Icarus Aerofly version 5 (OLD). They’re pretty amazing!
Steve do you still have any of those used planes in your shop for sale?
We do, but only for local pickup- one of the things that makes planes really strong is to glue parts like the tail together, so they don't fit in a box anymore, We're at Exit 18 on the NYS Thruway, if that's close for you!
Thanks Steve. Maybe I could make a road trip. I live in Colorado. 👍
Man I cant wait until I receive my killer planes 64mm edf with the crash proofing installed and the rtf
It's probably one of the planes in the shop right now- there are 3 jets among them. Soon!
Mine is the 64mm edf F 16 painted beautifully like my childhood favorite team the amazing USAF Thunderbirds,I remember being at Nellis airforce base and seeing them practice and my late father will be so happy and I wish that he could be alive to see me flying the killerplanes reinforced Thunderbird
My dad was an outstanding airforce pilot and I remember he was flying at Dayton afb in the airshow in his C130 and he met the usaf Thunderbirds and got me a poster autographed by the six of them,god I miss him so much
😥😥
If CZcams would allow it I would show a picture of my dad in his flight suit
ur voice reminds me of mr burns assistant from the simpsons
I’ve been found out…
@@Killerplanes hehehehhe
Great video. But the computer software programer obviously does not know that Corsairs are prone to tip stalls during slow speeds, especially turns. There is no way my KP FMS Corsair could fly that slow and stay in the air.
Wouldn't it be nice? I love/hate the way this Corsair floats around! Actually, the motor keeps running with the throttle off, but even so....and other than that, how have you guys been? Denise says Hey! What we need is a good east coast fly-in that's in a place that's more accessible. There's an old, BIG airport across the river that they have flea markets in- I gotta check that out. Would you guys want to come to this area for a fly in?
Gyro? We don't need no stinking gyros!
HAHAHAHAHAHAHAAAAA!!!! Then swill some tequila and shoot guns . And THEN go fly some RC planes!