Spyder Auto Installation: 2007-2013 GMC Sierra Platinum Headlight
Vložit
- čas přidán 27. 08. 2024
- Spyder Auto Installation Video:
Part#: PRO-YD-GS07V2PL-BK
SKU#: 5087522
*This install applies to all Headlight color variations for this model.*
Black Housing
LED Lightbar Headlights
Sequential Turn Signals
Wire Tapping: • Spyder FAQs: How To Wi...
ALL INQUIRES PLEASE EMAIL: Sales@spyderauto.com
This how-to tutorial guides you through the complete installation process from start to finish, and offers helpful tips throughout to facilitate a successful install.
Just installed mind. Got some quick splice connectors for the led C. Tapped the red wire to the green parking light positive and the black wire to the grey negative. My parking light only had two wires. Quick and easy! Looks great.
Was this to make the white c your daytime running light?
Thanks for the instructions! I just installed my Spyder lights into my 2007 GMC Sierra and they look AWESOME! I used the T-tap connectors and they worked great! I did pull back the rubber cover off of the tabs, soldered the leads to the tabs and pulled the cover back over them. They work and look great! All of my neighbors want theirs changed out now! I may have to setup a shop! :-)
Instablaster...
How is the head light output at night time ?
There are 3 wires in a parking light and if you don’t know what wires to connect to what. I connected the positive to the greenish wire and connected the ground to one of the grey wires. I’m pretty sure splicing them would also be fine.
Dude thank you so so so so so much I spent hours looking on forms for the wiring which is which only to come back to the video and find this comment thank you🙏🏾
Do you mean the black wire and nit the grey
@@Jesse8085 yes there should be a light green and 2 greys if you used t tap connects like me I did the red positive to the green and the negative to any grey wire any they worked perfectly
I just seen 3 green and a black wire
@@Jesse8085 what year and model cause I have a 2010 GMC Sierra and they’re was like a clip thing with 6 wires coming out and the parking light I believe had 3 wires coming from it it was the small bulb I wanna say
Ty for a well calm person 2 do this! Now I know what 2 do.
wish you showed what wires were what
Thank you sir , well done and well filmed
Well put together video!
are they difficult to adjust to make sure both lights are level, and pointing at the required height?
Has anyone purchased these ??? If so how long have you had them and do you recommend them? I made a purchase of some spyder after market headlights in the past and they were terrible quality.
They look nice but don’t last. My projectors went out about a year later. Now my headlight went out in one.
Same here, had for about a year and the C-bar led that goes around the headlight went out in my left one, now my right one is blinking in and out at times, save y’all money get a different set
😊gracias por el video
My light bar won’t come on ,did I miss a step
For any issues or questions about your Spyder product, reach out to our tech support team techsupport@spyderauto.com
how I buy the headlights?
Is the light bar supposed to blink when turn signal is on
would I be able to install these same headlights on the same model year silverado?
Do you have gmc specific taillights coming for this and could you design a 06-14 tahoe taillights like the 15-18 tahoe ring lights and arrow shaped reverse lights
When are you going to release the platinum series for the 2017 honda civic?
OK de estas luses cual es el tornillo para subirlas y bajarlas
are the adjuster in the same place?
one of my low beam doesn't work. how do i change it
For any issues or questions about your Spyder product, reach out to our tech support team techsupport@spyderauto.com
So you’re just gonna act like it’s plug and play and the headlights don’t come with 2 loose wires??
Should of shown on this video how to t splice, the other video is not helpful
Or just show us what wires you spliced together, what would that have taken 30 seconds.
Nah what if I want the c lights to be the day time running lights not park lights
Can you change the low beam stock lights to led lights ?
I been wondering the same thing
Yes of course people do that to save money all the time
What led’s did y’all use want to switch mine to led just can’t find any
Most aftermarket headlight bulbs are H1. I use ARC Products
Chales ese
WHoa... 400bucks? Yeah, I don't like my old work truck THAT much!
All this genius engineering, and they make it to where you have to take the entire vehicle apart to change a headlight. Why?