Video není dostupné.
Omlouváme se.
BMW M2/M3/M4 S55 DME Removal and Installation
Komentáře • 54
Další v pořadí
Automatické přehrávání
BMW locked your ECU to prevent tuning. Today, we UNLOCK it...Kies Motorsports
zhlédnutí 132K
My BMW M2 S55 Engine is Better than Ever! Crank Hub Fix | M2 Rebuild Series | 4kJoe Achilles
zhlédnutí 29K
BMW Charge Air Cooler and J Pipe DIY Upgrade Without Draining the Coolant (M2, M3, M4)Tommy L Garage
zhlédnutí 29K
Jak Vypadal Mariánkův Sraz s Fanoušky? #shorts #jonmarianek #marcelMARCEL
zhlédnutí 222K
Chocolate Screwdriver! 🔩 Always have the right tool for the job! #amauryguichon #chocolateAmaury Guichon
zhlédnutí 49M
DRAMA MR.BEASTAVidrail
zhlédnutí 314K
#JasonDeruloTV // Photos #GotPermissionToPost From lianayel #FromTheIslandsJason Derulo
zhlédnutí 1,8M
BMW S55 Engine COOLING SYSTEM EXPLAINED!Help Me DIY
zhlédnutí 22K
Vlog 31 - BMW M3/M4 S55 Valve Cover Replacement Tutorial (PCV Valve Failure)Awesomoto
zhlédnutí 18K
HOW TO DRIFT With Ben Collins the Ex-Stig in a BMW M2 CS.Motorflix
zhlédnutí 132K
CAN YOU TUNE YOUR BMW? How to tell if your DME is unlocked *check ASAP*AyyyMan
zhlédnutí 21K
How to fix the BMW crank hub! (1 hour 100% DIY walk through)Spencer Berke
zhlédnutí 201K
N55 ECU Removal DIYGSR Technik
zhlédnutí 43K
2016 BMW F80 M3 Twin Turbo S55 Bad Engine Teardown. Bogus Rebuild?I Do Cars
zhlédnutí 174K
Why does the CAR WIZARD hate BMW's?!? He explains exactly why on this 2001 325Ci?Car Wizard
zhlédnutí 1,6M
아이스크림으로 진짜 친구 구별하는법진영민yeongmin
zhlédnutí 13M
STEP CHALLENGE🦶Celine & Michiel
zhlédnutí 9M
Virální legendy potřetí: Finální zúčtování! | KOVYKovy
zhlédnutí 269K
Truck catches on fire and biker helps put it out 🔥😱 (via themountainmiller/ig)MasFace
zhlédnutí 23M
Getting her riled up for no reason 🤣Hunna & Lib
zhlédnutí 39M
NEJHEZČÍ OBRÁZEK = BRAWL PASS +Štěps
zhlédnutí 353K
ONLYNET Challenge s Mich Sakem a Dodem!Horis
zhlédnutí 233K
Lee a jeho progress 👏🦁👏 JanKanurek.cz 🫡 #thisiskurñalife #zabilcz #freerunning #trampolineJan Kanurek
zhlédnutí 1,4M
Sir, you are an absolute legend. This video was fantastic and easy to follow. Quality of production is perfect. Made life so much easier! Thank you!
My sincere thanks for that in depth connectors removal walkthrough. Couldn't figure out how to remove that last one and you saved my day.
Glad you got it done!
My sincere compliments on an excellent DIY for S55 DME removal and replacement. This is truly one of the best DIY videos that I've ever watched, and I've watched many. This video should be the go-to reference for this procedure. Thank you.
Talk about detail, effort here and commitment. My hat off to you
Best video hands down , I did everything step by step changed manifold , dme and throttle body save me $3k lol 😂 that’s what bmw wanted lol took me 3 hrs great video I’m not a mechanic lol 💯💯💯💯💯💯
Congrats on the job and saving so much $!
Thank you for documenting this, made the process substantially easier...
Very nice video. You did great capturing good clean video and audio. Nailed all the details of the process quickly too. I’d have to say that this video was a hidden gem 💎 for me. I had been looking for a week for a intake manifold/plenum video. I have to put everything back together and I didn’t make these top end disconnections or removals. I did pull the engine and transmission for a rebuild. Needed to see this. What goes over, under, and on the manifold. Took a ton of pictures. Thank you for the torque specs and for giving the complete process of putting it back in too.
Thank you for this super tutorial!
Thank you from italy!
I just removed my DME in 30 min, perfect tutorial.
Thanks
One question : i did not unplug the battery in the trunk, is it a problem ??
Did you have any problems not unpluging your battery?
super informative as always!! keep it up !!
Great tutorial. Thanks for taking the trouble to make it.
Hats off to you for the awesome video but holy sh*t what a terrible spot for that thing
Thank you for the details
awesome guide.
ahha that shirt is A+
As a locksmith, I have to access DME all the time. Can you tell me what years this particular procedure might cover? What year is this vehicle in the video? I've been fortunate in that MOST DME have been located where I can access them without major work. Also, it helps that I can plug into most of them without removing them.
Assuming it would be a great time to do plugs as well with this off?
Anytime you can bundle overlapping work is a good time!
Thank you for the tutorial. Was there any gunk in the intake or the intake valves?
Can’t get that connector on the dme at the very back. For me to slide the lock out the way I need to be able to grab it from both sides and I have no space to put my fingers down there. Idk how to get it out pls help.
Use a right angle pick or flat head screw driver to try and pry on each side/tab of the slide lock. You'll have to work on each side a little at a time... Once you crack the slide lock open a bit, it's much easier, but the whole thing isn't easy for sure.
Should i drain the water first before removing the intercooler?
Thank you.
There's no need to disconnect the intercooler and drain it. The hoses on it have enough flex for you to position it out of the way.
Curious how many miles on your car and how your intake valves looked? Just wondering if there was much carbon build up yet.
Oops, didn’t realize it’s a 2021. I’d assume it has very little build up being that new.
Buildup in a direct injected car is highly dependent on how you drive the car. Drive it hard more often and it will stay a lot cleaner.
@@derekhanson4215 Haha, yeah I don't have very many miles on it (a hair under 4k).
Guys ... Disconnect the battery before, because while removing my intake manifold, my DME touched briefly a metal surface under tension and an electric arc flashed, I don't know yet if there will have consequences ... Hope not
Still great video really helped me thank for your time
Do you have any form of social media or ways to be contacted? I'm interested in learning to bench unlocking and possibly know the ups and downs doing this.
You can reach me on IG at farkle_tech.
Did you have any issues with mileage not matching between various computers on the car? Did you have to sync anything that I've heard has to happen for any sort of odometer tampering to go away? Lastly, I didn't watch the full thing, but that looked fairly involved to swap DME, how many hours?
I didn't have any issues with mileage in the DME not matching. It sync'd right up automatically after reading it from either the cluster or FEM the first time I turned it on.
It took me quite a few hours for this video because of filming every step. Without that I can probably get a complete swap done in 3hrs.
It all depends how the spare DME was programmed and made for the car more than anything. There are tons of parameters that should be adapted to the car. The biggest mistake that some people do (for any BMW) is to swap in a DME, FEM/CAS, and key set from another car.
Did have to unplug the battery to start this work?
It's not necessary to do that.
How do you know if it’s necessary to bench unlock the DME
If it's 2018+ it should need a bench unlock.
@@FaRKle0079 I got the MHD wifi adapter in the mail and got a message that I need a bench unlock but that same message has a disclaimer on it saying that if it was unlocked to ignore the message.
If I try to flash it and turns out the DME was locked am I gonna brick the ECU?😂
@@ssanchez07605 You won't brick the ECU. The DME lock prevents unofficial MHD data from being loaded.
I have a totally unrelated question… after ICM and DSC/ABS hydraulic unit replacement, is it required to VO code DME module ? Thanks 😊
You shouldn't have to VO code anything if swapping in a replacement DSC/ABS unit. Nothing on the VO (vehicle config) changed. If you're adding a different ABS/DSC module that somehow has a different function than your original car, maybe you'd VO code that, but I haven't heard of that.
@@FaRKle0079 yes, in my case, I have replaced DCC with ACC option. VO coded FEM, DSC, ICM and couple of other ones but not DME. All modules show green but I feel like there is brake drag which is more evident while going up hill.
@@freespiritbmw8147 I guess you could try recoding the DME FDL, I don't know what in there would be linked to ACC though.
Interested in doing the same, can you elaborate more on the process of unlocking?
Essentially you get a pre-6/2020 DME, bench unlock it, clone it to your car, and swap it in. My friend was able to source some more DMEs and can do it for you (he's sold a few others since).
@@FaRKle0079 thank you for the info. Could you put me in touch with him?
@@DriftKr6l What's your email? I'll reach out to you there to explain the process in more detail.
Yikes. That engine looks like a nightmare to work on.
Enter VW :D