Is Molasses better than Evapo-Rust? Let's find out!
Vložit
- čas přidán 28. 07. 2019
- Molasses, Evapo-Rust, Muriatic Acid, White Vinegar, Organic Apple Cider Vinegar, and water (control) compared for rust removal. All of the products were tested over 3 weeks. 5 separate tests were conducted to assess performance, including 2 separate tests on rusty metal, metal flakes (corrosion test), painted metal, and aluminum. Before and after weights of metals helped to determine rust removal and corrosion risks. Muriatic acid is fast but aggressive rusting happens after using it. Evaporust works extremely well and doesn't seem to harm metal. Molasses is slower than Evaporust but seems just as good if used for 3 weeks. Both white vinegar and apple cider vinegar did very well but seem to eat away good metal too. A lot of viewers requested this video--so, thank you and please keep the recommendations coming! Thank you very much for supporting the channel by watching the commercials and through Patreon support. / projectfarm
Products Tested In This Video (in no particular order):
EvapoRust: amzn.to/2YoIpa2
Molasses: amzn.to/2YqTCa1
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/31aince
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC - Jak na to + styl
Thanks for requesting this one and please keep the terrific video ideas coming! Best regards, Todd
EvapoRust: amzn.to/2YoIpa2
Molasses: amzn.to/2YqTCa1
That was surprising.
instaBlaster.
Vinegar actually creates rust .. just an FYI
I'm really surprised that no one ever mentions that you should mix some Baking soda and water together to rinse parts after to neutralize alot of these after using because it will continue to eat away if not.
Evaporust works better the warmer it is. I typically soak for 24 hours and the metal comes out perfectly
Growing up in a farm community, we used to take a large plastic garbage can, fill it with water and 5 gallons of molasses. Which you got from the 10,000 gallon tank at the feed store, bring your on container, for about $3. We would just throw anything that needed rust removed in the can and fish it out a month later. When the molasses had finished its usefulness, it would get turned into the garden soil. 100% recycled. Cannot say one way or another if this was a good idea or a bad one, but you got to love the ingenuity and the practically.
Great information. Thank you!
Awesome
There was a guy restoring a old car. He bought a small pool and filled it with molasses/ water.
The effect was amazing.
That is actually fascinating!
Same here. I think the iron content in the soil might have increased, and any ph decrease of the soil was neutralized with the next fertilizer application.
I put molasses on my flapjacks every morning and so far, no rust.
Thanks, Project Farm!
Thank you!
I put molasses on my flapjacks, but they just stood up and gnawed on my food. 🤣
I really appreciate how meticulous you are with making the tests a fair and level playing field. I don't think people in a laboratory environment could do a better job.
Thank you for all your hard work.
Thank you!
Yeah, last time I took a jug of molasses to a lab for a rust removal test, they just laughed at me. Farmers NOT!
@thekeyboard warrior to be fair; it's not too difficult to eliminate variables and make everything as even as reasonably possible... however; I cant praise him enough on his jigs and equipment. Everything is a weird blend of expertly crafted and "I found this behind behind my shed' that's simply fantastic... he clearly knows what hes doing both mechanically in building those things as well as scientifically/logically in fairly testing them in a matter that actually applies to the real world.
Plus not taking sponsors... if I were him I'd be rolling in that GorrillaGlue money and already be onto the CrazyRussianHacker portion of my video career where I just make stuff up
@@ProjectFarm for the painted ones. Were they completely painted or just one side? Maybe it peeled since it was able to make its way under.
This video brought back an old forgotten memory about what an old sage friend of mine had told me about many years ago. He was an expert in rebuilding and restorations of cars. Museum quality. To him though, they quit making "real cars" back in the 30's. He had told me about a guy who many years before had sealed up a service station pit and had filled it up with molasses. They would lower a whole car down into it and let it soak for a month or two. It striped the rust off of the entire car. Inside and out. Even places where blasting media couldn't reach such as inside of a box beam. He had mentioned that it only ate the rust and didn't harm any still perfectly good steel. I guess he was right. Thanks again for a great video. Keep up the good work.
Thanks, will do!
I've been using Molasses for rust removal for more than 50 years. I learned this from my Grandfather. Its great to see a side-by-side comparison with other rust removal products.
Thats great!
Do you dilute it like he did here?
@@daviddelle774 Yes, you have to dilute it. Project Farm used a good mix. I would use distilled water in my mix to reduce the added minerals, but not too critical.
does it typically take 2-3wks for the molasses to act on the rust??
@@AN-kg4ei Yes. 2 to 3 weeks. 3 is better. You must be patient with Molasses.
You are a knowledge bank and a detail master. Keep it up mate
So molasses works... its just slow as, well, molasses.
Okay I'll see myself out.
Lol
LOL
Yup.
Jay Leno called and he wants his best joke back. That was very funny y'all!
AAron Smith ok,ok, just imagine all the chemicals in Jay Leno’s garage, I don’t think he uses vinegar or molasses to remove rust!
Interesting fact that perked me up when I saw the metal flakes come out, one of the original black dyes found in history is a compound called "Vinagroon", and it was made by dissolving iron filings in vinegar. I'm involved in historical reenacting and have made it on quite a few occasions for recreation leather and textile work.
Keep up the good work man! I love your channel
Thanks, will do!
This is why I read comments. Thanks for the trivia!
I use that to "age" any individual fence boards I need to replace, so they don't stand out like a sore thumb.
Put some iron filings on a pine board in the weather and look at the results. We learned this the hard way when a grinder was used at a building site of a kid cabin. Ughgg
Thank you for the reminder!!♡ I need to dye a leather project and had totally forgotten about vinagroon♡
I love how you read the product's marketing angles like they are indisputable facts. Then...
Thank you.
I love this in every video, I look forward to it.
We're gonna test that!
Molasses been removing the rust from my wife's cooking for years.
lol
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Man , I once made a similar joke to my wife , what I got for return ? take a wild guess ! PS never again !
@@hermanchow1405 I would guess dinner wasn't so pleasant that night.. lmao
@@ixionn563 ha ha you are so kind !
Your video on evaporust saved me a good amount of $$$. I'm rebuilding the suspension of a 20 year old car, instead of buying new bolts, I soaked the old bolts in evaporust overnight, voila like brand new. Thanks!
Awesome!
This is why I always look forward to your videos, always learning crazy old school ways of doing things. First time I heard of the molasses and water.
Thank you!
Yeah, acid eats pretty much everything - not just rust. At work, I generally use electrolysis to remove rust from small, irreplaceable parts. Good video, though!!!
Great suggestion on electrolysis. I tested hydrolysis a while back and a few viewers mentioned that it makes metal brittle. Have you noticed this?
@@ProjectFarm The parts I've used electrolysis on were either very massive (Indian rear shock bodies) or non - structural (lamp bases, etc) so embrittlement was not a problem. I'm not sure where that might actually be an issue. While I haven't seen it yet, apparently on last season's Guild Garage, they showed me using the electrolysis method on a couple of parts. (I don't get Discovery Velocity) LOL!!
Also, molasses is my next "go to" for de-rusting delicate iron/steel parts.
turco WO- 02 does not eat base metals. been dipping for years with good results. most of the time products made for the real commercial market are best
@@kbjerke read this part skipped 27 min of video 👍
The poor moles that had to sacrifice to make that large jug of molasses.
har har har........
🤓🤓
I wonder how many mole asses it took.
😂🤣😅🙉
What I want to know is what happens to the rest of the mole.
Safest: Molasses
Cheapest: White Vinegar
Strongest: Muriatic Acid
Optimal: Evapo-Rust
Note to self: if PF invites you over, bring your own beverages and do not let them out of your sight.
lol. Thank you!
hahaha
And hide your lawnmower lol
@Clayton Andrews
Unfortunately, the price of admission is one used-up Briggs&Stratton 450e, 500e, or 550e.
Beautiful!
Wow! I'd never heard of this. I almost just bought some Evaporust recently. I'll be using molasses now. Thank you!
6:32 -- Now drink it.
"This week on project farm activated charcoal vs stomach pumping"
LOL
LMAO
Great Job, I’m so impressed with these videos that I’ve started a list of the better performing products.
Thank you!
Great video Todd! I am very surprised by the molasses being so effective! I can't wait to try it myself. Thanks for your hard work!
Matt, Thank you very much! 3 weeks seems to be the right amount of time with periodic cleaning in between.
you can speed it by heating it, with something like a parts washer heater or fish tank heater
Would high fructose corn syrup work as well?
That weird moment when the "troll" suggestion wins the shootout.
Great point! I delayed this video for months since I didn't think it would work so well!
Or perceived troll comment.
Been a few weeks since I caught one of your videos...now I've been binging cause of the no bullshit no holds barred reviews of what your testing...love it and thank you for your incredibly hard work and dedication to honesty.
You are welcome!
I don't know how I missed this video when it came out. So glad I watched it. Such great information in your videos. From the design of your experiments to the data collection and analysis, you're like a one man research lab! Thanks so much for the great content.
Thank you!
That was super awesome, I wonder what the chemical reaction is between the rust and the molasses?.
Thank you very much! Your recent video on the Indycar ride was amazing! Always look forward to your videos.
An other reply by PF said it was chelation.
Maybe Nile red can dig deep into the reaction?
Tastes better than the others
I use a mix of molasses, apple cider vinegar, ketchup, paprika, salt, pepper, and garlic and onion powder. But seriously my mind is blown that this works so well. Going in, I assumed he would show that it's malarkey.
Sugestion. Apply heat to evaporust and molasses while testing rust removal.
Thank you for the video idea!
I stand in awe & admiration regarding the things that I learn via these tests. Once again it has been informative & entertaining.
Thank you!
What a great comparison! I love seeing the weeks of progress in just a few minutes. I actually did a similar experiment trying to find something to remove hot rolled mill scale. I settled on muriatic acid because it was quickest, but like you said, it starts to eat the steel too if you leave it in too long.
Thank you!
Ive used white vinegar for that several times.
Man, that's a huge bottle of molasses. I see a lot of pancakes in your future.
Haha
Its animal feed molasses, tho. Dont know if Id be too keen on eating it since it may lack preservatives and other safeguards.
Rum dude, rum
@@Mikkelltheimmortal Sounds like a plan to me...
I don’t think you’d be to interested in eating that molasses it’s meant to be a sweet treat for cows or deer.
if you have the time molasses is king a friend of mine put a 1927 Indian motorbike that he got out of a pond after 10 +years sitting there. He put the whole frame motor and transmission into a 55 gallon drum for 3 months when removed it looked like new and the mtor turned over and he could change gears and was able to disassemble like it was built yesterday
Impressive results! Thanks for sharing this.
@Zachary Dinubilo unfortunately not this about 15 years ago
Impressive!
mmh did he need to do any mechanical cleaning and what was needed to restore the frame for instance? I'm thinking could this be used to clean whole car frame from rust, cause car size pool of evapo rust is bit on expensive side, while pool of molasses could be on price range of regular DIY guy.
@@Hellsong89 other than washing off with water no.
Great video and outstanding testing procedures Todd!
You do an excellent job with your testing and setups, I'm more and more impressed each time you do something new!
Thank you very much!!
I'm truly amazed at the molasses! Great video and the hard work yet again my friend! Keep it up!
Thank you!
I look forward to the smell of molasses instead of vinegar on my future rust extermination projects.
Lol
You left out my favorite: phosphoric acid. It's the main ingredient in naval and aluminum jelly, metal prep for paints, and Coke!
Great suggestion! Thank you
This video is removing the rust out of my brain and it only took 17 minutes and 26 seconds. Thank you very much!
lol. Nice!
Thank you again PF, glad to see your channel experiencing well earned growth.
Thank you!
I love your videos. Even though I'm not someone who deals with mechanical equipment of any kind, your series on synthetic oil was super interesting and made me really think twice about what oil to put into my car! My next oil will be some of that Amazon Basics
Thank you for the positive feedback!
After the championship videos, I will be using the pennzoil ultra platinum
I never new about Molasses, I will have to try it. Thanks for the video.
Thank you!
Absolutely fantastic! I'm glad somebody finally tested all these methods against each other. Thank you!
Thanks and you are welcome!
I appreciate that you follow a fairly good scientific method.
In grade school I always thought that the ideal way to deliver a science project was via a video, but never had the means to effectively make a video presentation like this.
Thank you!! A video for a project in school is a great suggestion!
How many projects do you have going on at any given time?
Great question. At least 3 and sometimes up to 5 and that doesn't include the test design/planning that occurs a month or so before. Thank you!
Project Farm do you do all this alone or do you have a helper? Thanks for all the work you do for us.
I have a teenage son who's able to help me during the summer and weekends during the winter. It helps a lot. I don't have any other help besides him and it is a challenge to keep up. Thanks again!
Do you even sleep? So much content! Brilliant again thank you
Thank you for your diligence
Do I know why CZcams recomended this channel to me? No
Have I been absolutly loving this videos? Yes
Am I the target audience? Who cares hahah
Please keep going I love this!
Thank you very much!
LOL, same here. It was on the end card for a Garage54 vid, which I got to from an abandoned truck rescue vid, which came from an abandoned places vid, that came from a railfan vid, and who knows how it started. CZcams is weird.
This is truly a great video. Thanks for the time it took to do this research!
Thank you!
What a great test! I didn't expect these results
Thank you!
Wow extremely impressed with the molasses! the metal looks absolutely fresh off the assembly line.
Very slow but would be great for delicate rust removal!
Thank you!
Molasses For The Win, IMHO
I've been using evaporust for a long time...way before Hand Tool Rescue made it look cool. Mostly in places that is difficult to reach with tools like inside fuel tanks. I also used it because it works fast. It is pretty neat to see some of the alternatives to it.
Thank you for commenting on this. Evaporust is a great product!
This was so cool!! Saves more than three weeks of testing for the viewers. Also money and frustration.
Thanks!
This is actually one of my favorite channels, because it feels friendly not lying or fake.
Thanks so much!
A neat video would be to remove rust with electrolysis using different anodes. Love your videos keep it up.
The side with rust (positive terminal) is the anode. The cathode (negative terminal) can be anything you want as long as it conducts electricity because that's where the dissolved ions turn into solid metal.
@@shawn576 actually, you connect the rusted piece to the negative terminal, as ions flow from negative to positive. Your point stands though, it does not matter what you connect to the positive side, as long as it conducts electricity, as it won't have any effect on how the rust is removed.
Dad would tell the story.
When he would have a leaded 22 rifle. He would fill the barrel with vinegar. That would strip that lead overnight..
Thanks for sharing your videos.
Thank you!
I believe the mixture for removing lead is a 50/50 mix of white vinegar and 3% hydrogen peroxide which produces lead acitate. Which is dangerous to ones health so be careful.
Awesome video. Just got home from a week-long vacation and really enjoyed this as my first youtube video in a week!
Thank you!
Nice video and as always soo detailed in all of your testing!! Love it!! Thanks again for doing what you do and looking forward to some more videos!! :)
Thank you
Since watching your videos I've been using Muriatic acid, it has proven the best to completely remove rust. It's really corrosive and the fumes are extremely harsh and you need to refinish the surface right away, but there's simply nothing like it, and the steel is so well etched the primer and paint really sticks to it.
It's fantastic for rehabilitating mechanical components and at $15 a gallon is very effective for the money, but you MUST work outside or in another well ventilated area AND cover the acid lest it rusts steel surfaces nearby! A work-around is to dip the steel in phosphoric acid ("naval jelly") or citric acid afterwards.
Thanks for sharing.
This was a great video. Thank you. But I think your graphs would be easier to understand if you kept the products in the same location on each graph rather than ordering them from largest result to smallest result. Also, a final multi bar graph at the end showing all results for all products side-by-side would be nice to see as well.
Thank you for the recommendation!
This rust removal comparison was really helpful. Love your site. Thanks
Glad it was helpful! Thanks!
Thanks dude, a useful test that helps me chose a solution to my rusty problem. Much appreciated.
You are welcome!
Have you used an ultrasonic cleaner (heated or not) with any of these products to see if Ultrasonic cleaning adds anything.
I have, and it does
I use a harbor freight ultrasonic cleaner with evapo-rust and it works great
Hey, How about a video on ultrasonic cleaning vs other cleaning and dusting methods ? Just a thought.
Now I want to try higher strength cleaning vinegar in my ultrasonic
I use Simple Green and also Dawn dish soap in my US cleaner and it works amazingly well. The Simple Green pretty much digests aluminum though so be careful.
Loved this video, keep up the good work!
Still here to bug you for solder vs crimps!
Thank you very much! I need to do this one soon.
@@ProjectFarm According to the Air Force, a properly crimped terminal will have less resistance than solder, and will stand up to at least as much pull as a solder joint. In fact, a pull test is required on each batch of wire/crimper-adjustment/terminal to the point of failure, with the wire breaking b4 a pull out of the crimp.
Rule of thumb.....it depends on the quality of connection you need. Crimping is quicker, and can be used in most situations. Some connections are more sensitive (certain audio, video, and controller connections) and should be soldered. This is from over 40 years experience in electronic repair.
Much respect to the military but a correctly soldered connection will make a more efficient connection. However crimping allows the mechanical connection to the sheathing which will allow for a better pull out resistance. Soldered connection is best by far along with some silicone and shrink tubing . When I'm goin to do a soldered connection I will secure the wires together by zip toeing the sheathing to sturdy locations.
Are your connections critical to operation? Is the resistance a factor? Is the signal a tiny current? Is vibration a concern? Is the connection subject to Hot/Cold/ moisture/cycling? In those situations, a PROPERLY made crimp is the way to go. Think about it. Solder, of any current blends, is still a higher resistance and is softer than the wire. Solder deteriorates over time, under the conditions given above. A crimp, properly made (tooling, adjustment, with a ratcheting, non-reversing ability, will crush the wires such that the total circular area is completely enclosed with no gaps. It becomes the equivalent of a solid wire, and any surface corrosion that exists on the wire becomes a small percentage of the total resistance presented to the connector.
I agree that sometimes a solder connection is the only way to go. Some cheap PCB's have holes to solder wires to; some military connectors use solder to pins or sockets. But try to find a soldered connection in a high power (multi KVA's) connector.
I guess a proper TEST might be a good idea here. I state all of this to show that a good test is not just solder something up and make it fail. This subject is fraught with controversy among engineers, so Project Farm may be a little out of his league on this one. No offense. It depends on what you want to test FOR.
I'm a big fan and have recommended you as a go to channel on my Facebook page as well as in person. Ut I must confess that I had to keep rewinding to when you said the word "ruined" cause I love the way you say it. I'm embarrassed to say I had a girly moment. Your presentation is always great! We appreciate how you don't over explain and clip on at a steady pace. Some of these guys go like they're assuming the audience is lets say, slow. The intelligence you present in your videos as a whole clearly shows you respect ours, keep up the good work thanks!
Thanks, will do!
Excellant job! Thanks for all the hard work! I've got a rusty 4 point screw driver I need to save. Appreciate your excellant thorough tests. Many thanks!
Thanks and you are welcome!
you can get a couple pounds of 99.9% pure oxalic acid off amazon for like 10 bucks. just mix like a couple scoops in water and soak. its 1-1.3 ph so very acidic but doesn't eat metal quickly. its the active ingredient in molasses.
Great suggestion! Thank you
Perhaps a tea made from rhubarb leaves would work, too. That's also oxalic acid and why the leaves are toxic.
Just remember to keep it away from anything glass as you will etch it and possibly dissolve glass containers, plastic only when using oxalic acid.
I wonder how heavy corn syrup and honey would do. :-). White vinegar has many great uses. Muriatic acid fumes are the worst. Great video as usual!
Great video idea! Yes, the muriatic acid fumes are pretty bad and cause metal to rust that's 10-15 feet away. Looking forward to your next video!!
@@ProjectFarm any sugar is a reducing substance. Corn syrup likely would work just like molasses. The honey has antibiotic properties though, so if there is a secondary biological thing that is going on with the molasses, it might inhibit it.
@@ProjectFarm I watch videos by a guy who does metal finishes on high end doors and things. The fumes from the muriatic acid rusted the metal he was storing in his shop
I pulled my great grandpa's post drill (human-powered drill press) out of my uncle's scrap pile several years ago. Just have to rig a tub to immerse it in, and head to an ag supply store for the molasses. Thanks for the info that will help restore this antique family heirloom!
That is awesome!
Nicely done. I was familiar with Evapo-rust and have recommended it but was unaware of the others for rust removal.
Would love to see a video of a side by side comparison of paint removers and brake fluid if possible. Looking to start a project and would like to know what will work the best
Thank you for the video idea!
Holy cow. I legitimately just was searching about some of these products(evapo rust) to take rust off some of my car parts. This is fantastic. Thank you!!
Thank you!
wd brand of stuff work same to me if u happen to have any credit a lowes
Great video as always!! Can't believe how well the molasses worked on rust. Thanks for sharing be safe have fun
Thank you!
Great info delivered enthusiastically!
Thank you!
Why does molasses even work? It’s definitely a head scratcher for me.
Chelating agents found in molasses using a similar process as Evap-rust
Because grandma used it......don't know why
It also has a fairly wide range of pH values, so it may be acidic or basic in nature as well.
Ferment and distill!
The fermentation process steals oxygen from the iron oxide - is a guess.
the Best Rust Remover I've seen is a Laser it's expensive but awesome
seen videos and that is the bomb, wish i could afford the hardware, instant rust removal, no wire brushing, no soaking over night or up to 3 weeks. just amazing. :)
Only 80 to 100,000 bucks for a good machine last I heard!
I was one of those viewers who suggested molasses in your 1st video. I was pleased to see you did this follow-up video and include molasses. I've used molasses several times on rusty tools. It's not fast, but I know I can safely leave the tool in the molasses for several weeks without any risk of removing good steel. It does a fantastic job and is the best choice if you are not in a hurry.
You did an excellent job of comparison. It was a very fair test. Keep up the great work!
Thank you very much for recommending molasses!
Do you dilute the molasses with water?
Huh. I would not have predicted that. How interesting! Great testing.
Thank you!
Should've checked pH on the solutions, seems like the muriatic acid was over-diluted
Definitely surprised by the molasses, I never heard of that little trick, but now I know for the next rusty job. Evaporust honestly really is good, I've used it multiple times but seeing the comparison and little experiments showed it. Most stuff your going to be removing rust from is probably something that you aren't worried about losing paint or coating anyway so
Thank you for the feedback
Always informative. Thanks for the great ideas
You are welcome!
Really well done comparing your control and all products tested
Thank you!
@@ProjectFarm Was using safety glasses, gloves and hearing protection while working on a project. So, how about a real life testing of safety wear? Not some controlled government study in the lab but real world challenges.
Well, I guess I know what I'll be using to clean the rust out of this old generator gas tank. After I shake some nuts and bolts around in it.
Thanks for the vid.
Thank you
This was a very interesting video, I've never heard of molasses as a rust remover before. I wonder if other sugar syrups would work the same? What about if you don't dilute the molasses? What about other types of molasses?
Anyway, I enjoy your work, thanks for doing what you do.
Thank you!
Excellent work, best test/review that I have seen.
You have made up my mind.
New subscriber.
Thank you!
Thanks for watching and subscribing!
Thanks for all the great information. I look forward to your videos
Thanks for watching!
I use to metal detect a lot when I found old coins I would put them in vinegar for up to a month or longer it worked pretty good just not good on coins made with lead in them
Molasses as a rust remover? I never would have guessed. That was really interesting and very informative.
Thank you
This video is so well done.Full of info, and held my interest to the end. The Editing is so snappy and seemless. Molasses...makes nice rum,good for gardening, kitchen and workshop and cow feed.Top stuff.
Thank you
What a well made experiment.
Thanks for the information!
You are welcome!
Am I correct in that these were in solution for 3 weeks rather than the whole test taking 3 weeks to perform? I use a fairly concentrated acid in a coffee container and come back after 30 minutes. I think when you approach 3 weeks you have more than approached "buy a new damn bolt" territory of trouble.
Think of it less for bolts and more for vintage machinery that can't easy be replaced.
The bolt is just example material.
This reminds me of the office episode when Kevin can do math really well when the units are pies rather than dollars. 432 pies/72=6 pies.. $432/72=??? The bolts are a stand in for any type of steel you want to remove rust from.
What about whats the best and safest product for removing copper corrosion? You could just use pennies and show the detail up close to see if the copper itself is being removed too.
Thanks for all the great videos!
Thank you for the video idea!
@@ProjectFarm Since 1982 pennies have been made from zinc.
THANK YOU for this new contents!!!
You are welcome!
Thank you for making these videos.
This video was linked in a Megan Thee Stallion and Beyonce video comment, I wasn't expecting this but I still finished this video and liked and subscribed, nice video it was informative. :)
Thanks for watching and subscribing!
Why am I hungry for gingerbread now
Me too! Hope you enjoy the video!
I wanna listen to ZZTOP after this video :p
Looks like I'll be getting some evaporust for my boat engines rust! Thanks very much for another excellent video!
You are welcome! Thanks for sharing.
Fantastic channel. Love your work, amigo.
Thank you!
I used feed grade molasses and water to de rust a sickle bar for my garden tractor it took a month to clean it up but when it came out it was clean of rust and after washing was ready to be painted with primer
Impressive!
I met a couple of guys who restored vehicles. They would take engine heads etc and put them in a 44 gallon drum full. Diluted to about a 40 or 50:1 ratio. Came out like they were pretty near new.
Any chance you could test for the best rust to primer paint. Currently using Rustoleum rust reformer for a project hoping it's the best thing to stop and prevent rust
Thank you!
Project Farm rust inhibitors I use coraseal, ospho, rustoleum rust mort, and lanolin I wonder which is best
These vids are useful. Appreciate what you do. Automatic subscription.
Thank you!
Awesome job with the testing. Im looking to remove rust from inside a gas tank. After your video im definitely split between the molasses and the vinegar.
I’m going to show this to the City! I want them to put molasses on the roads in the summer, it even matches the colour and it’ll clean the rust from the winter salt right off my car. It’s a sweet idea don’t you think?
lol. Thank you!
Better traction, as well.
Molasses might actually be a useable substitute for road salt.
@@garethbaus5471 Except it's toxic to pollinating insects like honeybees
@@pootispiker2866 Might not be as much of a problem if they are using it as a substitute for road salt (which they use in winter when pollinating insects tend to be inactive). Road salt also tends to be toxic to a lot of things (ergo salting the earth to deny one's enemy the ability of using farmland).
I always use vinegar for my projects...cheap and effective!
Great point
Really useful video!!!!!!!! I can't believe the results!
Thanks so much!
I really appreciate the time you take to make these videos I never knew molasses would do that good of a job always heard about it but never knew it would do that good thank you
Thanks and you are welcome!