Interesting, we have 2 TM125 both had issues one was brought brand new the other from local farm sale, it was below average condition with head/cooling problem, poor service life. The TM are better tractors then replacement T6/T7 despite having big 7.5 power star engine. Working on tractors I need work tray to put tools n parts on, then when I finish I clean all tools n put them back in order. This because my Pa would kick my ass if lost any tools, he would make go n pay for any tool go missing.
@@williambowsie9088 plenty of cosmetically shagged ones mechanically perfect ones on donedeal, super q cab are well known for rust, find a good welder and she'll look fresh out of the factory
I try to keep thing's tidy & try to know where everything is. Sadly that doesn't always be the case. It can be even harder to keep thing's tidy, if other people are using the same tools, as yourself. 👏👏👍👍 How did you get on with the rad? I know there's a bottle of stuff that you can get, that blocks holes in radiators. But I suppose it depends on where the hole or holes are in, in the radiator. Great video again. Keep up. 👏👏👍👍
That's on the left hand side behind the fuel tank around where the transmission joins the back end. I'd be checking your wiring and fuses before you go changing the sensor. Tms are a fright for the wires going hard ontop of the back end
Good old TM’s, we have 140 & 155 here 💪💪
O no tools must go away each time I finished with them 😉😂
That's misery, when you're working outside and the rain arrives. No doubt you'll get it sorted.
Today isn't much better!!
I never knew TM’s had a tool box under the radiator 😁😁
Interesting, we have 2 TM125 both had issues one was brought brand new the other from local farm sale, it was below average condition with head/cooling problem, poor service life. The TM are better tractors then replacement T6/T7 despite having big 7.5 power star engine. Working on tractors I need work tray to put tools n parts on, then when I finish I clean all tools n put them back in order. This because my Pa would kick my ass if lost any tools, he would make go n pay for any tool go missing.
Great video as usual I’m hear since 500 and hear before 5000😏🤣
The 5000 will take a bit
I’m here since the few hundreds Aswel and 5000 won’t take long I’d say with the way u going up few hundreds subs every video and thousands of views
Hi mate i am looking at a 8560 1999 with 8000,Hours,do they give much throuble?
Mr cvx do u get many clutch packs giving up on the tm tractors? And which gearbox clutches are stronger. Rc or pc
Impossible to keep all the tools in the one place when your at something
I'd have most of the tools lost by now lol
I'd love to restore a machine for tractor runs and some fun. Project 😉
That's what our fordson major will be for
@@mrcvx ohh can't wait to see that..id love to do up a ford 7610 force 3 cosy wee machine wee power house
@@williambowsie9088 plenty of cosmetically shagged ones mechanically perfect ones on donedeal, super q cab are well known for rust, find a good welder and she'll look fresh out of the factory
@@jerryodriscoll3691 id soon learn how to run a mig save money 🤣🤣im Well trained on wearing a mask too 😀 😄 😉 👍
@@williambowsie9088 it would be a great skill to have, might even get a job welding them for other fellas 😂
Also could you do a video about the gears on the tm,Thanks
handy having a toolbox on the massey theyd all be lost by now without it
Toolbox is usually empty and there all trown on the floor
@@mrcvx ah unlucky
can you show how you mounted the roosters on the tm?
Any chance you could do a video of wiring the marker lights on top of the cab that’d be interesting
Yes need to do them on another tractor so will probably stick it up
Did you say the radiator only lasted a year? That's terrible!
I think a stone must have flew up and hit it, I'd be unlucky like that!!
Hi like your video. Which is better new Holland or case?
Everything gives trouble unfortunately
@@mrcvx as far as power goes which is better?
The tvt and the cvx are both 6.6 litre sisu.
They would have more power than the tm but are a lot bigger tractors
I try to keep thing's tidy & try to know where everything is. Sadly that doesn't always be the case. It can be even harder to keep thing's tidy, if other people are using the same tools, as yourself. 👏👏👍👍
How did you get on with the rad?
I know there's a bottle of stuff that you can get, that blocks holes in radiators. But I suppose it depends on where the hole or holes are in, in the radiator.
Great video again. Keep up. 👏👏👍👍
If you could have any one tractor for free what would it be? Great video 👍
Steyr 6195 cvt 👌👌👌👌
@@mrcvx must say I did not expect that at all
Hi. I have an error code f77 which is output speed sensor. Where is it located on tm 140?
That's on the left hand side behind the fuel tank around where the transmission joins the back end.
I'd be checking your wiring and fuses before you go changing the sensor.
Tms are a fright for the wires going hard ontop of the back end
How did this work out in the end?
Perfect he was able to patch the holes so I refitted it and flying since
The tm140 finished production in 2008 we have 1 there the last made .
are you sure ? it could be 2008 registered
Ye im sure yep they finished production in 2008 theres a few down my way our 1 only has 3800 genuine hours on it
Interesting I didn't know that!!
By the way great content keep up the great work 👍👍🙂🚜🇮🇪
Thanks. Try to keep it some bit interesting
Witam a wiesz jak się robi kalibracje podnosnika ?
Not sure I know it involves plugging something out and going through a sequence but I can't remember properly.
Sorry
@@mrcvx Thank you 👍🇵🇱
if i could find half the tools i lost, i could start selling tools
I'm with you on that one 😂