ToothPick // TP3 // Efficient // Long Flight Time
Vložit
- čas přidán 28. 08. 2024
- If your a fan of long flights, this is one to build
Adam Bomb Build and Repair Services - bit.ly/2Uxkwu0
FpvCycle.com for many of the components used in this video
Runcam Nano 3 bit.ly/2JgkkKz
Eachine Nano vtx bit.ly/2Um06oZ
Pids as requested photos.app.goo...
🔥Daily FPV Gear🔥
► Goggles SkyZone 03O bit.ly/34fc6LQ 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► 1s Charger HTRC X4 bit.ly/2RNav9O
► Radio I use the original X-Lite, no longer recommended. Look at the Jumper T12
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ-NB
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon
► / nickburnsrc
🙏 Motors coming back in stock by Apr 10th unless DHL is just super duper slow. Try the triblades for more control. I hate tuning. Haaayteeee! 3.5.7 defaults work nearly flawless. RunCam nano 3 is sadly discontinued. There's a new possibly much better camera coming in a couple weeks. Maybe....I get a demo next week. 1S! Check out Nate Payne soon!!
No! If they discontinued the nano 3 they better be sure the next one is better and just as light.
@@NickBurnsFPV the issue is that the lens manufacturer didn't recover after the virus economic hit. They've sent me three cameras with three different lenses. All suck. All narrower fov and ugly distortion with dark murky shadows. So so so sad. I told them to start looking at larger lenses because these little ones aren't working out. They're much much worse than the original lens on the nano 3
TP3 is my favorite quad (of 9 currently) by far. Nothing else comes close. Thank you so much for the work you put into this! I'll be building another when motors are back in stock. LOVE YOUR VIDEOS!!!
Sad to hear the company went under due to this pandemic :(
Are the tp3 frames in the same motor shipment ?
My tp3 is a 2s drone, runs 1204 8000kv, on rdq 525 hv 2s. Auw is right at 84g. These things are awesome. Kababfpv got me into FPV. watching him take a bad flying whoop, put it on an open frame, and have (at the time) stellar performance, made me go out and buy parts for a 2s 2.5" toothpick. That was 4-5 years ago? And the toothpick formula is still by far my favorite category of build. Whether it be a 2" or a 4" and anywhere in between.
TP3 on Nick Burns! This is two of my favorite people in FPV coming together. This is like Superman and Batman. Please do more videos like this. Perhaps a Babytooth video? Keep up the good work!
Thanks! Will do!
@@NickBurnsFPV Show us the Babytooth BUILD!!!!! (Please🥺?)😂😂
That thing rips and has good flight times, it’s a winner for sure! Thanks for the great review and stay healthy.
I had forgotten all about these and a buddy I fly 5inch with just built one and invited me to check it out....well, you already know I was in love with it! 😂 now I'm building the TP3 3s and we're also ordering parts to build a couple of the 1s babytooth micros as well 🎉 i didn't realize how great these were and how solid the builds are until I held one and watched it rip in person! I instantly became a "toothpick person" 😂 I'm obsessed with them now and it completely revived my love for micros...I was ready to move on from my whoop so these are perfect for flying at home! ❤
I still I’ll have my 3s version. I like it a fair bit more than all the 1s 3” tp
Hey Nick, I took the parts off my eachine twig and transferred them over to the Tp3 frame. So far so good! Worked better than I thought.
I LOVE THESE TOOTHPICKS! It makes my day when you do a review!!! Always enjoy watching you rip around the yard!!! The amount of people you have helped get flying is just so amazing! Thanks 4 all you do!!! 👍😁👍
Adam Bomb. Is the Man !!
Thanks! You too!
Out of all my kwads I fly this one the most. Kabab hit a home run on this frame and motors.
Didn't he make a mono body frame for it that would bring the weight down drastically!
@@tyrdle ah i had thought he made a 3" mono body besides the babytooth! Still a sweet frame!! I recently broke my 3" pickleR3 frame that i thought was indestructible, i kept clipping the ground.
Well done, three thumbs up as two would simply undo the first one!
One suggestion is to put some Uma grip on the jaws of a spare pair of needle-nose pliers to try first to keep from severely scratching or damaging your camera. (for those heavy-handed...lol)
ah, that is a great tip Thanks Frank
Love those TP3's! And i agree, building is half the fun for me in flying!
Don't own a TP3 myself sadly, but i love my eachine reddevil. It is not to powerfull, but really light and has some great flight time, which i like!
Think all in one frame and tri-blade is what Kabab recommends now. Lighter weight and grippier respectively. Love my TP3 and 1s Babytooth. You’re right - weight is all important in how it performs. These motors are hard to get but sooo worth it. Silky smooth. For $40-50 extra quality is so much better.
Things should be back in stock next week apparently so good timing.
I was excited when I saw you finally got time to cover the TP3! I would definitely recommend trying this build on the 3016 triblade props. Switch out the props, add a touch more camera angle and this build will really come to life. I built mine up with a set of the 1204 motors, nameless 12a board, diamond vtx/dvr, and a caddx kangaroo camera in a larva x canopy. It comes in a bit heavier at 108g auw with a 3s 525 battery, but it's become my favorite build to fly. I tend to be one of those who enjoy the building as much as the flying, so this type of setup is great. Even if you don't revisit this build with a follow up video, do yourself a favor and try the triblades. You won't regret it.
Love my TP3. The motor combo is even better with the Gemfan 3016-3. Corners great and shoots off like a rocket!
Have the Amaxinno motors. 20A Beta FPV board running NamelessRC 400 DVR board/vtx. Flys amazing. Super long run times on 3S 450mah battery. Perfect backyard/park ripper. Was burning up the 12A boards. 20A has been good so far.
I was contemplating going 4s, glad I didn't as I would have likely burned up my little 12amp esc.
@@NickBurnsFPV For sure. I think the 20A is the way to go for longevity.
For the frame delimitation in any frame I use hobby grade Cyanoacrylate CA glue. I coat the edges moderately with the CA. Especially in areas like the tips of the TP3 frame. I also apply it on the edges of new frames to prevent the delimitation.
I just built a "Baby Tooth" for a friend. It's using Triprops, I was so surprised the power and most excellent flight characteristics on 1s 450mah.. Great video as always Nick...👍🏻🍻👊🏻
By the way, I'm almost up to 400 subs...🥳
I haven't gotten to explore the 1s pick yet. Keep working the subs will continue to come.
@@NickBurnsFPV
I want to build one for myself, however, no stock on the motors.
Finally we get to see one of the originals on this channel :D
For TP3-style quads I'm currently looking into the flywoo robo 1202.5 motors (because all other motors are unavailable for all of eternity) in combination with a super light mono body frame.
Dave_C FPV uploaded a video of his new frame and with those motors a week ago. And it can get the weight down to an AUW of 84g, but it does look to be a little less efficient.. at least if you go for the 3-bladed props.
Fpv cycle will have stock back by end of next week!
I'm waiting on motors to build a second TP3 after having so much fun with it. Triblade props made the quad feel a bit more responsive to me.
I run mine with the 1303 AMAXinno motors and the 3bladed props and find it a lot more snappy on the throttle after switching to those props. If you haven’t tried them I’d highly recommend it!
See Well I have the same motors and props on my turbobee 136. Love ‘em
All I fly is toothpicks... This is my go to toothpick. I love it so much. It has made me a better pilot. everything bob sells has my attention. His tiny crossfire T's are a great match too.
I built a baby tooth 3mm frame with the xing 1404 motors and pretty much the same components as yours and with the 3x3 props it flys like a 5” and is perfect for freestyle around the house.
Thanks for your work here Nick. Looks to be a smooth flyer, nice little build. Jeff
Fantastic flying and review, Nick!!! 😃
Right now I can't buy anything (construction... Again! 😕), but I would love to build one of those! 😃
But I would look for 5500kv motors. To have a bit more speed. 😬
Nick I pray you and your family are Yah blessed during this period of time. Man you really know how to fly, Brother Thank you
Thanks, you too!
I built a rocketeer frame with some 1103 tmotor 8000kv, beta 20amp aio and a rush mini. Running on 2s 450mah and the performance blew my mind! Average flight times, first 3inch tp.
im impressed at your 56g weight! My TP3 is the same except for betafpv 1204 5000kv motors. I also got an old school micro beeper, abit of cable braid and leds on the back and comes in at 66g. I also like the gemfan 3016 triblades. 5 min flight on average :)
the emax tiny hawk freestyle is crazy efficient , i got 4.5 min flight times. flying slowly and you get even more.
that might be a good option for people how dont want to build
Right Guard Official agreed it was my 2nd quad and I can rip it and still get around 4 minutes
There is a big performance difference between these classes. The freestyle does have an efficient setup.
I would love to know if you can transfer the guys of the TH Freestyle into the TP3 frame?
@@mgrollins Not really effectively. The AIO/board is the wrong size with the wrong size mounting holes. Also the motors of the TH are to small to run 3inch props.
@@NickBurnsFPV Thanks!
I'm loving that flight time.
Thank you again. Keeping the joy n qwads flowing.
Always love your review video. Thank you for this TP3 review. I love the TP3. Flying both on 2s and 3s. The low end power is actually very good. Just need to do some PID tuning. Need to know how to tune the filter setting as well especially if using Betaflight 4.1. if the filters are properly tuned, it will flies even smoother and more efficient. I get over 9 minutes of flight on 3s (combination of fast and cruising)
So impressed watching you fly this quad. Gonna have to build one soon. You get faster and faster every video. Peace out.
I have the same build but use the Gemfan 3016’s (3 blade) which seem to be much smoother and more efficient than the bi-blade’s. These are incredible little machines....none better IMO.
Yeah 3 blade is totally more efficient than 2 blade.
I Put Xing 1404 X 4600kv Motors on this frame and yes she runs 2S ! Its a MONSTER and yes hot glue those Tri-Blades on her !! I Miss the old days when it wasnt jacked up prices $$$$
This has been on my list for a bit. Man, now I need to move it higher up.
This is literally exactly what I was trying to build but ended up with something that flys but that's all I can really say about it that's good lol
Need to drop weight or something?
👍Gonna have to get a 3 in, I have a 2.5, but that extra .5 makes a world of difference. Thanks!
Yes it does!
Just cruising around, with only 1 or 2 punch outs I got over 12 mins of flight on a 3s 650. 😳I don’t recommend that size batt for this platform, (450mah is perfect for me) but just thought I’d add to the efficiency / flight time comments. Also like others said the Gemfan 3016s are sweet and it flies very quiet too.
That quad is amazing. Wow! Wicked flying .
Really liking the long flight time. That build looks and fly great. Great review Nick. 👍👍👍👍👍👍👍
Glad you enjoyed it
I got the tp3 with the amaxinno 1303 that he had at start real nice
I have 1105s on my tp3 and I can get even more time ripping around than 1303's. I get longer punch outs with 1105s too before I start getting lipo warnings. I think more motor protection is needed because I have ground all of them down and lost 2 motors due to less protection. I am gonna give Damfastfpv's frame with webbed tpu motor protection and see if I have any better luck. Still an amazing frame. cheers!
are you running 1105's with a 3 inch prop?
@@aaroni.87 yep the tp3 is a 3 inch frame. Damfastfpv has a 3 inch frame as well. I have tested that frame a bit more and it works better as a racing frame instead of a freestyle frame. tadpole 3" will be my next frame.
@@reaction7281 Cool, i had a babytooth frame ready to set up in a 1s build but decided throw it all on the damfastfpv frame. it's a little heavy for a 1s build but flies ok. I'll likely transfer everything to the babytooth frame and do a 3s set up on the damfastfpv frame. 😊
5 Minutes.. wow.. It looks like it flys nice too! Thanks for sharing
I missed out when trying to order some 1303's for my next build... so ive gone with flywoo robo 1202.5... Fingers crossed they perform ok... or at least hold me over until something better becomes available
they are very good !
If you want better cornering/snap response, you can try the GemFan 3026 triblades.
Goto the 3 blade props, if you can find them haha. But get the ines bob sells bc they are 3018x3 and the ones pyro sells are 3016. And yes there is a difference between them.
I have the jesc on mine and it's a dream!
I crashed mine half throttle into a satellite dish last week, all I bent was a prop, but I was using the 3.1x3.4 from hq, good racing props for this light frame.
My tp3 is a bit heavier at 62g with a diamond vtx, baby ratal and beeper on it running 1204 5000kv its not as punchy as the 1303's
But still flies great. As you say the feel with the 3 blade prop is better but you get more punch out the 3018 bi-blades
I used a mobula 7 for mine put some 1103 motors that had max 4.2 amp rating is 70 grams with a 550 2s so abit heavy but flies great
Hitting and getting stuck in trees. Sounds familiar. Thanks for another great review.
Im running some 1103/10000KV on 2S and a foxeer toothless. It's 55 grams and flies AMAZING! (usually stick to 2S)
Got 2 primo 3s one same setup as yours 3016 tri blades and one with 1106 t motors on avan props that i prefer more cause its faster with more punch could be the props cant(unless i drill) try cause 2 mm shaft on 1303s
So awesome!
very nice build nick looks really fast little guy lol i really love it look super floaty too
I have very good flight time results with the ldarc 1304 - 4100kv at 4s with 3inch biblades, flying weight 150gram inc 650mah/4s you reach 7 minutes with decent freestyling around. I wish there were more 1304 size light efficient motors around of better quality.
Yesss m8!
Keep up the hard work.
Love from the Middle East.
Subbed
NBD camera mount is their best product ever hands down 🙈 just wish they finally made one for 14mm cameras, I am not a fan of these whoop lenses on 2.5"+ rippers.
Filip Radelic you can just unscrew the lens and screw it in thru the hole in the mount and it holds the camera well, the only negative is that you need to
re-focus it
@@schwerergustav5890 woah how is this the first time I’m hearing about this?! Thank you!
Gday Nick, very cool flying kababs toothpicks would be very awsome to build if you could actually get any parts from fpvcycle there always sold out, great review i think Bobs a big fan of yours Nick great work mate.👍🛸
yes, bob has a strong following and parts are sadly difficult to come by. I would check on parts about once a week.
Your nano 3 looks great, mine looked like balls
Maybe out of focus?
@@NickBurnsFPV yep and unfortunately not able to get in focus
use a tri-blade for more grip in turns.. the 3016 would be perfect I think
Tri blades do hold a better in turns, I am looking for more quick prop response in hard turns, like the explosion when I punch over the house.
@@NickBurnsFPV dont' think the 1303 has enough torque for the tri-blade?
Might have to build one like this. I’m always looking for a longer flight time
I know this video is 3 years old now, but what are the props on the Apex racing frame at 12:15? I want to get something with a steeper pitch like those to really get traction on tight maneuvers
Great vid as always.. 👊👊💪💪
been using these exclusively for 5 months. can't go back to 5inch or other 3 inch
found your sweet spot. Does the search end now?
We got almost the same build except im using crossfire. I get 4 minutes easy with a 550 mah 3s.
he's doing a Project Farm impression
I hear this from time to time. I don’t hear the resemblance but it must be there
ive been flipping my tp3 with 3s 550mah bricks and it goes 9 minutes before i have to land. Granted i'm not maxing the throttle, but i don't really need to in the location im flying at.
My only complaint is i wish it had the option for a real battery strap. Im not sure how they'd do it, but i'd gladly add the weight for a real strap.
Yea it’s not an easy one with the need of the arms to touch between the main sandwich plates.
Great video love the toothpick 3” quads. I’m building my first quad! I’m excited, After looking at the setups I’m aiming for 2S-3S as well..
I’m having trouble locating the proper camera mount aka hood for my toothpick. I’m using a Dave C Sanchez Ultralight in the 1.5mm thickness with the 20mm mounting pattern. I’ve purchased my AIO FC/vTX/Rx and my ESC board, rcinpower 1202.5 6000kv motors, and a foxeer nano camera. Do you know where I can find a pod/mount that will fit my foxeer toothless 2 nano to my 20mm frame? All of the ones I’ve found seem to be 25x25 AIO format. I do have access to a 3 d printer if you can point me to a thing verse file that’s great too. Love your videos, 4” LR attracted me to the hobby but tp3 sold the deal. I’ll list my parts so far below. Ty in advance for your answers.
Jumper T-Pro, ELRS 1000mw lite backpack
20mm Sanchez 1.5mm ultralight frame
20mm happymodel pancake fc/vTX/rx
20mm hackrc 4-in-1 ESC
Rcinpower 1202.5 6000kv motors
4S 670 Graphene LiPo which I’ll probably bust in to two 2S might even go 2S 450 or 2S 1600 liion we’ll see.
We will probably need to find a 3d printed canopy. I suggest searching printables.com or thingiverse.com for "foxeer toothless 2 20x20 canopy". When we find one that will work we can either ask a friend with a 3d printer to print or send it to a printing service to print.
Look at the Tattu 550 95c 2s. I can get 7 and a half minutes on my toothpick with the some flippy floppys and mostly cruising 👍
Love it!
Great vid. Stay safe
Thanks, will do!
Great review. I plan to build one eventually. Hard to get the parts.
that it is. I believe more parts should be in sometime in the next 10 days.
You said something about low throttle control and snap turning control, three blade 3016s are my prescription
Great video btw, also throwing a mob 6 onto a 3 inch frame is an easy 1s tp3, need the motors of course
Great review. It sounds like your really enjoying it. If you had to make a change to make it better you mentioned the motors were not torquey enough? What motor's do you think would be better. Personally I prefer a KV in 5500-6000 range where I give up some flight time for more pop.
I don't have a great suggestion, I haven't explored the new 130x, but a 1404 6000kv could be what I am looking for.
@@NickBurnsFPV Emax just released an eco 1404 6000 and there cheap. Those are my next set. I have a set of RCX1306 6000kv great performers but are amp piggies. Not new by any means but still a great performing motor.
L.O.V.E IT!!!
Nice build..👍.. seems to be a nice flyer looks good..👌.. what transmitter are you using?
I use the x-lite v1.
you said "smoked tree" hehe
yep, I pretty much centered that tree. doh! moment.
"i smoked that tree pretty good" lol me too buddy
Sooo, idk if this a dumb question or not, I have some low kv 1304’s rated for 2-4S would a 1s make it swing for a ‘toothpick’ build? If so I’ll start ordering parts rn...
It they are rated for 2-4s, it might make it swing if the esc can power them, but I suspect it will be either slow or very unstable.
I might need to try those props out I tried the pyrodrone 2in bi-blade that kabab had on the list but it has little no low end at all. so hard hover it will fall or take off. But flys good with 40mm 4 blade
Wow the long flight time on this is awesome. I think it will be good on freestyle nick what do you think?
yes, its likely better for freestyle than all out racing.
i'm kinda surprised you didn't use 4s. it would fit your style better. and you can still use 12a board, at least in my experience and some of others.
I wasn't certain the esc would handle it, seems it would be close to the edge.
Is that hockey tape holding the motor wires down to the arm? I would like to know all about your taping science.
I don’t believe so, I think hockey tape is fuzzy this is not. I have a link to it way down in the video descriptions
@@NickBurnsFPV I don't see it there. Would you mind telling me what it is, or what video talks about it, or are you that hard-up for click-thru monetization?
@@buckstarchaser2376 sorry, I must have updated the listing after that video. These are the tapes sources I have verified ► Emax tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
How do I flash BF 3.5.7? I have tried every version of the configurator and 3.5.7 is just not in the list, only 4.0 and newer.
We often have to download manually from the flight controller manufacturers website.
github.com/betaflight/betaflight/releases/tag/3.5.7 you can get it from here now. Find your target and then download it. The betaflight dev's have removed 3.5.7
What do you prefer mamba 1105 5500kv or the 1303 5000kv?
Yes, I'd also be curious about this. Are they really that much better than 1105s?
Depends on the flying you are doing. The wider stator (1303) seem to have a bit more low end throttle resolution for better control on the lower half of the throttle. 1105 motors may be a hair faster, but they lose the precise control over the prop. Also consider 1204 motors as they are more available.
Due to most of my flying being low below the tree line I prefer the wider stator, the prop control makes it easier to be precise and in control. It doesn't have the top end pop like a 1105/6 but it gets to the top end it does have faster.
About speed the mamba 1105s are top with 3s, efficient as well but less control! I fly also a tp3 with 1204FPVCYCLE in 4s with Betafpv 12amp Fc and 3018 prop ...crazy fast !!!
Nick Burns thank you for your input!
Nick Burns what should I do with my hobby Brothers avenger 0804 15000kv motors I stupidly put them on a beta65x which is very inefficient so what could I do with these motors without basically just happened to let them go for way cheaper than what I paid for them.could I use them on a toothpick frame and is it possible to run to s on that high of KV I'm not sure why I bought 15000kv I should have stayed there like 10K or 12K at the best.I would like to have the flat time that you shown in this video but on 2s and still have good power is there anything I could do to make that happen
Its a bit high kv for most non-whoop frames. Maybe look at the frames from r3dshifters.com I have reviewed one of the whoop frames and I am currently working on a non whoop and another of their frames for review.
Finally you got one man lol
I tried re focus that camera and couldn't get it to budge. Just got my new one last week. i like the camera, shame they're going away.
Looks like the camera might stick around, but the lens is changing, less fov on the new lens.
Long flight time plus able to rip it....very nice, only thing that could make it perfect is HD lol
I have heard of people putting hd cams on, I worry the camera wouldn't survive...depends on the mount but its super exposed in this configuration.
@@NickBurnsFPV yeah would have to shave weight somewhere to add camera protection or would lose the power to weight ratio. Also how much more power if any does an HD camera pull vs. other?
I WANT ONE BAD !!!!
What did you use to glue the antenna to the canopy? Love the TP3!
welder adhesive is my glue of choice.
imagine flight time with 3800-4500kv motors. You could use tri blade. Snow melted and I will fix my TP3, burn a 20A AIO after less then 15packs! lol, I am trying to fix it myself and Betafpv is been nice to help me out figuring part number. I
What is the battery wire you use that has that black cylinder? 😮
The cylinder is a capacitor, which can help to clean up voltage spikes and overall electrical noise. It does have heat shrink holding it to the battery lead wires.
think the word you were looking for @2:45 is fixate :D
got this on my bench right now! im using a 20amp betafpv board just becuase its what i had laying around.. i hope it doesnt add tooooo much extra weight.. oh well. maybe ill swap it out wit ha 12amp eventually and drop the 20amp in something else..
how are these props?? better than 3018's??
oh also - what firmware are u running on this?? 4.1x? 3.5.7?
I haven't tried the 3018s, so I can't speak to those, but others here in the comments speak highly of them. I am running 3.5.7 and have an image of my pids in the video description. I doubt the 20amp board will add more than 2-3grams at the very most.
Nick, why you used Eachine VTX instead of something like Rush Tiny tank. ( take that with a grain or 2 of salt ) :D , and wht triblades instead of bi blades for longer flight time
rush tiny weighs more and I don't find it performs any better. At the time of the video we didn't have t style low pitch tri blade props. This is also Bobs recommended build.
@@NickBurnsFPV ohhh my, so its a myth then that bi blades are more efficent than triblades, we try to follow fpv influencers but one guy say one thing and another guy say another. so i think at the end we personally need to do our own testing and find out what is best to a given personal scenario. you lost me :(
@@rolosaenz No! Be careful reading your question into my response. I did not say that more blades is more efficient. I am saying I didn't try tri blades as they weren't available when this video was made, and also these are the prop Kabob recommended at the time as well.
@@NickBurnsFPV Geezz i need to see my eye doctor and upgrade my reading glasses !!! LOL !!
@@rolosaenz no worries
Anyone using the Beta FPV 1204's 5000kv motors on their tp3? Just ordered some curious what my flight times will be using 450mah 3s
I haven't used them on a tp3, but other frames, they flight time will be a bit less, not sure how much, but the punch is a bit more agressive.
@@NickBurnsFPV ok thank you!!! The 1303 are never in stock...
I'm looking at the Tinyhawk freestyle on 1s to get me out of the sim.
long flight times + very docile + very quiet.
What do you think?
[also if you can recommend (inexpensive) goggles for someone with glasses (someone with myopia) that would be great]
Thanks Nick!
Edit: Tinyhawk is the only RTF I know of with more than a 6 min flight time. Compare to Babytooth on 1s for flight time?🤷♂️
Whatever you can do, ill watch it!!
I like the emax rtf products for a 1st quad, it gets you flying right away. Best advise is to make sure the props can spin freely on launch and when we crash don't try to take off from the grass or with props obstructed. When props can't spin and we try to fly we run the risk of burning the esc, this isn't specific to emax product but many many micro quads.
@@NickBurnsFPV Awesome, thanks. I dont suppose you know other pilots that deal with glasses do you? That's my last hurdle😅
👍 👍
Hey Nick, Great job on your Channel! You definitely are a speed demon and your acro is coming along as well. I like everything about your channel except for 2 things. 1. In your intro you say, "welcome back to the Channel". Actually, I hear a lot of CZcamsrs making this mistake. May I recommend either just introducing yourself. People will know it's your Channel or give your Channel a name. I know that naming your Channel may seem a little narcissistic but as much time as you spend and the quality of your videos I think most people would agree it deserves a name. Maybe even a racing name?? 2. You always show a lot of videos from inside or outside of your house. Since you always show at least 1 full battery people have probably seen your house so many times they could probably draw up some blue prints. lol. I would recommend taking your viewers on a scenic ride. Either way your Channel is very watchable and enjoyable. Even if you don't change a thing, I will still be watching. Thanks
Thanks for the input. The "first line" is something I have thought about. I don't know if I can come to terms with making the channel about myself, even with the reality it is. Flying in other spaces has been a challenge....family, work etc. Of the times I have, rarely does it actually make it to video.
@@NickBurnsFPV Hey there, you know I figured you might be thinking that but giving it a name just helps people remember it easier. After all, right now I remember your Channel because of your name. So really how much more could it be about yourself...? Lol. Of Course I am just kidding around. And I understand about being committed to more than just FPV and CZcams but at the same time I definitely have seen a
Nice progression in your videos! And TY btw for returning my message. I see that you have quite a following and again it must take a lot of time to talk with your fans too? You know all the Greats have a FPV name and I think you are practically FPV royalty. I have an Idea, why not take yourself out of the equation and let your community vote on a name? Could be fun?? Again, either way you have taught everyone, including myself about this complicated world of FPV. Last suggestion, what do you think about in your exit lines, you give a 10 second teaser video on what your next video will be? You can ask your people to send any questions or Highlight request they would like to see about what ever piece you're doing. And you will choose the best question in the next video. The reasons behind this you are letting your fans tell you what they want to see. I can't tell you how many times I've had a question about a quad and I spend hours going over videos trying to find it. Primarily because I'm yo lazy to read online. Lol. Anyway, I promise no more suggestions. I used to have a channel myself and I guess I'm trying to live vicariously through you. Take care Nick.
Btw, my name is Chris.
P.S. Keep making Great videos. Yours are the only one's my wife will let me watch when she's in the room
@@NickBurnsFPV don't change a thing ❤️
Hii! What would be the current day version of this?
I am not sure how much would have changed over time. fpvcycle does have a parts recommendation for the tp3 on the website.
have you tried the three blade props yet? hope bob gets more motors :/
Not yet. I have the props though.
@@NickBurnsFPV just posted my initial impressions, great training tool when my 5" quads are down. Also, I'm gonna build a 1s babytooth as the tp3 is a bit much for my yard.
I'm not sure what it was about this vid but it made my eyes hurt 😬
Please for the love of quad !! what sir is your pid tune???!!! Pls we tp3 newbies need to know!!! I wanna fly smooth on 2S and 3S pretty please with fully charge batteries on bottom :)
lol. I added an image of my pids to the video description. Note I am running betaflight 3.5.7
@@NickBurnsFPV thank you sir! you are a gentleman and a scholar!!