YAESU FT-710 FIRMWARE STEP BY STEP UPDATE(Perform Reset Once Completed)

patreon.com/M0FXBHAMRADIODIARY (Perform Reset Once Completed) • YAESU FT-710 Factory R...
YAESU FILES SECTION
www.yaesu.com/...
FIRMWARE 2023
www.yaesu.com/...
INSTRUCTIONS
www.yaesu.com/....
USB DRIVER
www.yaesu.com/....
CHANGELOG
[FT-710_Firmware_update_202211]zip Contains:
• MAIN: V01-06 /FT-710_MAIN_V0106.SFL 11/14/22 (New)
• DISPLAY: V01-05 /FT-710_DISPLAY_V0105.SFL 11/14/22 (New)
• DSP: V01-00 /FT-710_IFDSP_V0100.SFL
• SDR: V01-03 /FT-710_SDR_V0103.SFL
• Firmware_Ver_Up_Manual_ENG_FT-710_2211A 11/14/22
Implements improvements:
1. Fixed a bug that "Key up" noise appeared when operating in CW mode on 28MHz band.
2. Fixed the problem that COM Port Baud-rate becomes 4800bps when power is turned ON with
"PRESET" ON.
3. Fixed a bug that sometimes-prevented transmission when a linear amplifier (VL-1000) is
connected.
4. Fixed a problem that continuous operation or hang-up may occur
when playing/rewinding/forwarding recorded data while receiving a signal.
5. Optimized variable volume and minimum headphone volume when turning VOL knob.
6. Fixed a bug that caused a delay when an external CW KEYER is connected.
7. Fixed the problem that CW transmission may not be possible with the straight key.
8. Fixed a bug that CW does not work properly when "BUG KEY" is selected in
"KEYER TYPE".
9. Fixed a bug that PC KEYING did not work partially in CW mode and CW AUTO mode.
10. Fixed a bug where changing the Baud-rate of COM Port is not reflected correctly.
11. Other improvements and optimizations have been made.

[@fabiobarone]

hello there are same people body that can help me???? i have a bug firmware update error code 002 and my yaesu ft 710 don't will reboot is in loop firmware update.........thank for your helping me............

[@HamTechRadioScannerDrones]

Hope you sort I recommend email Yaesu.

[@fabiobarone]

@@HamTechRadioScannerDrones thanks i,try

[@Aussie3rdgeneration]

thanks 😀

[@HamTechRadioScannerDrones]

Welcome 😊

[@truthfilterforyoutube8218]

Please update your software links as they no longer work

[@HamTechRadioScannerDrones]

www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=615ADFEAB5EDBC65EBE1D64835F209DB&DivisionID=65&isArchived=0