Fixing vehicle that dies out. P0641

Sdílet
Vložit
  • čas přidán 16. 01. 2021
  • *Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use*
    Automotive Test Light- amzn.to/3z1Pdxa
    Flexible Backprobe- amzn.to/3Pyr3zO
    Multimeter- amzn.to/3PbuT23
    OBD Scan Tool- amzn.to/3zaNWnq
    Wire Piercing Probe- amzn.to/3OecWhT
  • Auta a dopravní prostředky

Komentáře • 75

  • @OzMechanics
    @OzMechanics  Před 2 lety

    **Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use**
    Automotive Test Light- amzn.to/3z1Pdxa
    Flexible Backprobe- amzn.to/3Pyr3zO
    Multimeter- amzn.to/3PbuT23
    OBD Scan Tool- amzn.to/3zaNWnq
    Wire Piercing Probe- amzn.to/3OecWhT

  • @garyyoungerify
    @garyyoungerify Před rokem +1

    Dude, your are the best. thank you for the most informational video. I swapped the engine & transmission in the wife's Acadia and the P0641 was the only issue. I hope you read this. Will be looking for you for next car repair adventure. Thank you!

  • @hddm3
    @hddm3 Před 3 lety +1

    Always nice to find the gremlin! Good find

  • @stewartboucaud9919
    @stewartboucaud9919 Před 3 lety

    Awesome job my friend.

  • @mikecont9742
    @mikecont9742 Před 3 lety

    Great video. Learned a great deal..

  • @TheTonyfrancojr
    @TheTonyfrancojr Před 10 měsíci

    Awesome stuff buddy don't know what I would have done without this video. I really appreciate what you did for me. More than words for sure!!!!ty ty ty ty so much

  • @htwrk2
    @htwrk2 Před 3 lety +1

    Good job! It seems to be a trend on GM vehicles. Must be all the cost cutting they have to do. The engineering is sound but the bean counters won't let them use enough hardware to properly route the harnesses.

  • @larrynance1269
    @larrynance1269 Před 3 lety +1

    Great video!

  • @chrisg1302
    @chrisg1302 Před 8 měsíci

    thanks for this video, man.. it led me in the right path.

  • @shawnking8471
    @shawnking8471 Před 3 lety

    I just ran into P0641 on a Chevy uplander , wiring harness to gas tank , red/white striped and white wire on the 8 wire plug in where badly corroded

  • @thebaldmechanichardatheari1124

    Good find.

  • @stevenkietzke5582
    @stevenkietzke5582 Před 3 lety +3

    Scanner is a good source of information

  • @TheEvilMechanic
    @TheEvilMechanic Před 3 lety

    Nice job !

  • @mtrltoolman
    @mtrltoolman Před 3 lety +1

    Good job.

  • @aymenmohamed1134
    @aymenmohamed1134 Před rokem

    Nice job 👍🏻

  • @philloso1426
    @philloso1426 Před 3 lety

    Good video!

  • @gregorywebster1420
    @gregorywebster1420 Před 2 lety

    Great video ! Like how you went directly to the problem and proceeded to the diagnosis

  • @peaceintheheart5083
    @peaceintheheart5083 Před 3 lety

    Very nice, thank you, we subscribed :)

  • @fire7765
    @fire7765 Před 3 lety +1

    Good job

  • @rrmech11
    @rrmech11 Před 2 lety

    Nice job

  • @PhillyDee215
    @PhillyDee215 Před 3 lety

    Nice visual 👌

  • @vipincyril5207
    @vipincyril5207 Před 2 lety +1

    Thanks bro 👌

  • @iankelly2110
    @iankelly2110 Před 3 lety

    nice find

  • @worksmagic89
    @worksmagic89 Před rokem +1

    I wish it was places like this I could volunteer my enclave to get fixed for one of these type videos

    • @OzMechanics
      @OzMechanics  Před rokem +1

      I still charge for diagnostics. But always welcome to film

    • @worksmagic89
      @worksmagic89 Před rokem

      @@OzMechanics fair enough

  • @bradtomacelli4651
    @bradtomacelli4651 Před 2 lety

    When I had this problem it was a 5 volt reference wire on the transmission harness if you look up the diagram it will show you which one is five both when I've used continuity it was acting up I replace this wire problem was gone it's been about a year so far

  • @OzMechanics
    @OzMechanics  Před 3 lety +1

    If you feel like this video helped out, feel free to support the channel by donating. Just one click away on the link below, to help support the channel :)
    www.paypal.me/ozmechanics

  • @chengchild2
    @chengchild2 Před 3 lety +1

    Amazing

  • @filibertovargas8354
    @filibertovargas8354 Před 3 lety +1

    Nice one amigo

  • @andrewmcintyre8318
    @andrewmcintyre8318 Před rokem

    how was it fixed- Do you replace the wire wor just wrapped the wire with an exposed copper

  • @Radu2024
    @Radu2024 Před měsícem

    Nice job!
    What diagnostic documentation are you using?

  • @janvrancic
    @janvrancic Před rokem

    Great video. Can anyone tell me what software is he using for at 3:50 for checking which sensors are at reference 1 line.

  • @jannehusedcardealer2309

    Hi mate, I have an issue with my car Nissan Juke 1.5 DCI 2011 diesel for months now the car initially starts and when hot it will shot off when cold it will start normal so I decided to check the fuel pressure sensor take it off and clean and fix after which the car doesn’t start anymore. I taught it was the high pressure pump I bought another the same issue. I have change the engine the same , what I have find out is that there is no ground on the car the wires that are supposed to be ground a supplying 4.5v, a lol the 12v are ok 5v ok but no but ground 4.5v

  • @angelcortez9798
    @angelcortez9798 Před 2 lety +1

    What color are the 5v reference 1 circuit wires for code p0641 leading to the fuel rail sensor on this vehicle except it’s the Buick Enclave 2012 not gmc hopefully you get back to me

  • @DependableAutoTruck
    @DependableAutoTruck Před 3 lety +6

    i have found several and fixed from watching scanner danner

    • @OzMechanics
      @OzMechanics  Před 3 lety +1

      I’m glad I watched his video that night

    • @pedrorojascervantes3928
      @pedrorojascervantes3928 Před 3 lety

      I like that he is thorough & shows you different methods & you get a more thorough understanding of the component & interrelated systems.

  • @Angeli.
    @Angeli. Před 3 lety +1

    Tnx

  • @fredsalter1915
    @fredsalter1915 Před 2 lety

    "BLOPPERS" LOL!!!

  • @user-kc2by1el1j
    @user-kc2by1el1j Před 3 lety +1

    May you give us the link of website or app you get the information about p0641 following sensors

    • @pedrorojascervantes3928
      @pedrorojascervantes3928 Před 3 lety

      Pro Demand . Not sure what the subscription is but there are free/ cheap(er) alternatives. Just do a search on U tube for professional subscription alternatives.
      Also there are on line forums with a wealth of info for your particular make & model.

  • @pirihern9329
    @pirihern9329 Před 3 lety +1

    Muy bueno

  • @dge29
    @dge29 Před 2 lety

    Great work!

  • @mtsanchez27
    @mtsanchez27 Před 3 lety +1

    Hi there! Do you have by chance the video link for Scanner Danner to compare both videos, please?

    • @OzMechanics
      @OzMechanics  Před 3 lety +1

      czcams.com/video/rLTMYAvpJm8/video.html

    • @mtsanchez27
      @mtsanchez27 Před 3 lety +1

      @@OzMechanics you're a great technician mister, keep uploading videos like this because you have no idea on how you really help, mechanic beginners like me trying to become like you, Paul, and other masters on this business! Thank you so much!!!!!

    • @OzMechanics
      @OzMechanics  Před 3 lety +2

      Thanks for the kind words

  • @oscarpalacios7198
    @oscarpalacios7198 Před rokem

    Super

  • @cpcoark
    @cpcoark Před 3 lety +2

    Nice fix. Why were you not monitoring the 5v reference with your scanner or meter while shaking the harness?

    • @OzMechanics
      @OzMechanics  Před 3 lety

      I would rather use the scope especially on the last shot a laterally was pushing the wire on the compressor housing and it gave 2 quick drops. Not sure if the scan data is hold pick that up

  • @K5p.R3nz0
    @K5p.R3nz0 Před 9 měsíci

    I looked at all the wired and contact spots still don’t know any body can help out ?

  • @khalidkfy7368
    @khalidkfy7368 Před 3 lety +1

    Good morning ✋

  • @warrenlouisiana2277
    @warrenlouisiana2277 Před 23 dny +1

    So how did u fix it?

  • @markmartinez7998
    @markmartinez7998 Před 3 lety +1

    What web site do u use for your auto information

  • @honestmechanic7974
    @honestmechanic7974 Před 3 lety

    How many of you tried cleaning your screen when he was scrolling through mitchell

    • @OzMechanics
      @OzMechanics  Před 3 lety

      Yea, I need to screen record. Thanks for watching

  • @MONCHO6603
    @MONCHO6603 Před rokem

    I having problem with Nissan Quest p0172 and p0175, I spend over $600.00 fuel pump replacements o2 sensor etc.

  • @ufartface
    @ufartface Před 3 lety

    the cause of the problem is he bought a gmc

  • @Sroor2023
    @Sroor2023 Před 3 lety

    Worst car ever made Chevrolet Acadia and her sister terrain I think 😂😂😂

    • @jeffreybass5479
      @jeffreybass5479 Před 3 lety

      Sister to the Terrain is the Equinox.

    • @Sroor2023
      @Sroor2023 Před 3 lety

      @@jeffreybass5479 is there a well built, well made suv by Chevrolet other than Tahoe?

    • @Sroor2023
      @Sroor2023 Před 3 lety

      @@jeffreybass5479 I think it's same engine when I saw it one time but anyway both are hard to work in so tight working space, it seem that designer was so angry that day so he or she made it like this 🤪🤪🤪 also Acadia well known after warranty expire transmission will fail unless you extend the warranty they'll replace it on their own, i mean the agent stealer 😁

    • @MawMawsGirlz
      @MawMawsGirlz Před 2 lety

      I have an 06 Equinox and it is now showing the P0641 and it’s due for inspection! I’ve had nothing but trouble out of this car!

  • @candeffect
    @candeffect Před 2 lety

    Only one God - God the Creator.
    Saying 'the gods were looking out for me' mocks God.
    Don't be stupid about God and your eternity.

  • @Tomsfoolery.
    @Tomsfoolery. Před 3 lety

    Nice job!