It is only when you watch a review by someone like Justin who really and truly knows his stuff -- that you realize that most of the YT product reviews are pretty much low-grade self-promotions.
Frank Farago Wow! I Appreciate that! Thank you! You would be surprised how many companies i turn down because they want me to sign a contract and demands. And i just wont do it.
One thing I hope BM add is remote control of the P4k/P6k via HDMI like they did on the ATEM Mini ! (I wish all touch screen Monitor add this feature actually hehe). This would allow a clean feed from the camera YET keeping the OSD informations, and it would allow for all angle touch screen support (including on camera zoom from the 4k/6k sensor). They might easily do that when you press the setting option, a popup occur asking if we want to configure the monitor or the pocket. And routing feature so we can decide what is output via SDI or HDMI Out (Not sure if it passthough or not). If I were doing job where I wasn't responsible in the end of media offload, then it could be a problem it could be more interesting like you said, but I always end up with a copy of the media which is stored locally and uploaded to a server in a datacenter. As for disconnecting the monitor and bring it with you during lunch is really interesting... Right now, I bring my computer and do my own offload if needed during lunch, which I can wireless feed via the HDMI out my screen to multiple devices, but that bring the media to an unsecure location which isn't great (But fine for the short film stuff I'm doing). If BM implement the feature I said at the begining, I'm pretty sure I'll be buying one, but until then my current setup with 2200nit screen on camera does the job. One thing that worries me is those tiny SDI connector... I see larger SDI connector on camera being damaged and being intermittent, so I'm not sure about those tiny connector (I saw review from the Hyperdeck shuttle 2 that those SDI connector does get broken easily)
Thanks for the review! This is a monitor I’m interested in. I currently use the Atomos Shinobi SDI with my EVA1. I like the monitor (especially having the SDI because it lets me use the square peaking option from the EVA1... for some reason the box peaking doesn’t work with HDMI) but it does run a bit hot! I don’t feel the need to have an extra backup of my recordings yet... and the battery life with the Shinobi is good with the large Sony battery. Still... I might pick one of these monitors up one day! We will see.
@@JustinPhillip haha! After watching that review I know I won't regret it! Right now I am just lucky to have my news job which has been taking up a lot of time. Also not seeing to many productions going on in Vegas right now too. How's it going where you are at?
Had this monitor recorder since it came out it is a great product but not been without its issues (colour shifts when changing modes incorrect lut display ) these were partially corrected with firmware updates but I h had to send mine in for repair due to purple fringing on the edge of the screen it was sent back from Blackmagic with the engineers saying it is a known fault and they are looking into it. So yes a good monitor but not without its faults and the usb c port is in a stupid place why not on the side.
Awesome product again now I have another choice to review and go over and research to see how it will Fit for me, i also shoot rather frequently and would love the option to walk away with footage for my reels... awesome awesome product... this might be my option, I’ was about to press “buy now” and purchase the Atomos Ninja V package 📦 for the size and also the features... but lemme study this blackmagic design video recorder and see... so for now the $1675 budget has been blown yet... thanks again, I also need to link up with you on your other platform to continue this and many more conversations... I can tell we’re gonna work together soon...
As an Atomos Shinobi owner, I can certainly agree that their products are not what they are cracked up to be (I detest mine). I especially doubt that its claimed 1000nits is anywhere near that value, given that its brightness is very close to one of my cheap Feelworld 450nit monitors. I have had to set the Shinobi to B&W mode recently just so that I can focus accurately in daylight. My Feelworld Ultra Bright 7" is miles ahead of the Shinobi, but I need a bright 5" monitor for my smaller rig so there's no point in getting another 7". I've been pondering the 12G VA 5" for a while and it sounds like it might be worth getting and, as I'm purely a BMPCC4K user, the SDI isn't of any value to me. I'm hoping that Blackmagic updates (or is able to update) the VA so that it can record BRAW from a P4K/P6K. That would be the icing on the cake.
A month has gone by and recently I decided to go for the Blackmagic 12G VA 5". What a difference! It makes the Shinobi look like a third rate, cheap piece of rubbish. What I'm especially cuffed about is the clarity of focus assist, even at half brightness it allows me to focus accurately, even on dimly lit subjects. As an aside, I have an Atomos coiled HDMI cable that doesn't play nicely with the VA, constantly losing signal, so I replaced it with a cheap flat cable and nary a problem. And Atomos has also designed the mains adapter so that it won't work on the VA. Coincidence or what?
Thanks for this review! I am about to send back my Ninja V because I have dupe frames (duplicated frames) in my Prores HQ footage. Which is very annoying because it renders the footage unusable. Also: I do not like the "legalize" workaround that Atomos has implemented on their monitor, ridding us of HLG/PQ monitoring in doing so. I will order the BM Video Assist this week. I am looking forward to being able to film in B-RAW with my S1H and grade in Davinci, which is not possible with Prores RAW. Also: the Prores RAW workflow is very convoluted in FCPX.
Great video, Justin. Really enjoying all your videos thus far. Keep it up. Thinking about getting one of these for my c300mkii. Also, i had the same issue with the samsung ssd... usb-c port fell apart within two days of use and I couldn't recover what was on it. Luckily I already had it backed up elsewhere. Now I only use the Sandisk extreme pro ssd's and they are amazing.
Hey, do you still have this monitor? If so, could you please tell me in the anamorphic de-squeeze feature, does it have the 1.5x amount? (ex: 1.33, 2x, etc) Thanks for the help!
Thank you for this great video! I got a question for you. Is it possible to use AF tracking focus (face and eyes) on Sony a7 Mark III using Blackmagic Video Assist?
I've help others on set with P4k, and one thing I've seen is people freaking out that it missing footage on their SSD drive and playback didn't work... Then for me to come in and open that Media card of the pocket and take out their SD Card in there ! Some USB-C Cable act weird which can cause issue depending of your operations. As for connector becoming damaged, that mostly operator error I would think, especially if it loose going up and down. If it goes in but just don't feel the resistance to keep it in, then that different. In my setup, I never touch the USB-C connector in camera, it permanently affixed to the Smallrig T5 holder, and I just pull out my T5 drive from it socket. This mean once the T5 drive get to the connector, it is always aligned correctly. Also even if it become lose, it not a problem (until I go the PC), but if it does become loose, it time to change the drive.
You make some good points, especially about the 12g SDI connections and cable, except shooting with a 1080 limitation is not helpful. Need to get a camera that shoots 4k over HDMI ( and SDI). Maybe I do not understand you correctly though.Your camera only outputs 1080 over HDMI?
@Justin Phillip, Does the video assist support Luts? If it does you could hook it up to your computer and a color calibration tool to create a calibration LUT. The downside is, that you'd have to output your display LUT via the camera and toggle it on/off for recording. Maybe you could also create a combined LUT that includes both the calibration and the display LUT, but you'd have to test if that gives the desired result.
I have a BMCC 6K Pro. Ive bought this 7' version. What is the best HDMI cable to link the pair up as all the cables I'm seeing say it won't show 4k at 60fps but I'm filming at 4k at 120fps sometimes. I won't use it to record as recording off my 6k pro but want a cabkle that will allow me to view my footage.
Also use Alvins or Tilta cables and run everything off one V-Mount. Also no dramas. Do you know if I can use the Video Assist purely as a monitor and a remote run/stop trigger for the Pocket 4K?
I am researching monitors myself. Watching reviews of Atomos they mentioned problems with "ground loops" also when powering more than one device from the V-Mount batteries. I do not understand it all either and have not seen yet any scientific explanation from anyone, say, for example, a video device or electrical engineer. I am not an electrical engineer, but an engineer, and I am guessing there is some stray voltage leaking somewhere when combined with certain devices and certain configurations, which can go over the "internal resistance limit" of what some device can handle. So perhaps the problem is also due to some poorer quality devices being attached to the configuration? It is difficult to imagine that it is just an internal design problem.
I do have one question. In your view, how much better do you consider the VA when it comes to focus assist compared to any 5" Atomos monitors you have/have used? A 7" high nit monitor clearly has advantages when it comes for focus peaking, but I haven't had the luxury of comparing such to a 5" monitor.
Australian Image Well, i’ll put it this way. For my talking heads, and pulling focus of myself with my tilta nucleus nano, it’s easier for me to see it on the 5” video assist than it is to see it on my iPad Pro (which is larger than 7”) . Focus peaking turned on both btw. This HDR video assist is the sharpest, cleanest monitor i have ever used. And if you been on the channel for a bit, you know how many monitors i’ve tested out. 👌🏼
@@JustinPhillip Thanks for that. My frustration with the Shinobi has kind of reached a peak. All activities in our neighbourhood across the pond are still lockdown, but once things start moving again, I don't think I can keep going with the Shinobi, especially once summer rolls along.
first of all love your content, second you mention this can record log 4k60 is this with specific cameras? or any camera I currently own a nikon z6II and with the atomos ninja V new version im top at 4k30 log
Great video! Just one question. How long does the battery actually last? Lets say with two medium sized batteries. NP-F770 or whatever they are called.
Here's a more detailed review, i address power around the 25 min mark. I honestly cant remember, i never use it with batteries: czcams.com/video/7ut5fA4wsHs/video.html
As for cameras and monitors (HDMI ports is what I hear mostly) shorting out, would it be something as simple and easy to as turning off/on the wrong thing in the wrong order? Like too much power being routed to something if something else is turned off? I've also heard, like you said, it tends to be a cheap cable issue, so... I want to run everything off a single V-Mount, but I'M SCARED! 😅
Hey Justin, can you output an HDMI signal when your inputting from SDI. I use SDI out of camera but want to send a wireless signal out through hdmi for others to monitor.
I was using v mount batteries and a good cable and it still fried my camera sdi out. Just something to look out for. As a matter of fact, it was an Alvin cable. Lesson learned, don't hot swap, bad habit. Lesson learned.
What are your thoughts about Nikon announcing the Z cameras supporting black magic raw I just ordered that black magic assist for my z6 thank you for the review
How is the POWRIG dummy holding up? I have Core-SWX (Switronix) version and it shuts off the VA if I go past 50% Brightness. Depending on your results, I'd be looking at either the POWRIG solution or just going with a regulated 12V cable.
@@JustinPhillip Justin, there is no up to date video on CZcams that compares BM OS vs SmallHD. This would be SOOO helpful. I understand SmallHD is the standard choice and likely for good reason, but what is is specifically in the OS vs Blackmagic? Thanks!
Hello Justin, do you know if I can control de camera settings with this monitor ?! I have a broken screen on my BM and I'd like to know if I have a total control of the recording in the camera itself ... Thanks
Hey ! I choosed a Video Assist also, and took the 7" over the 5" because of internal XLR plug in... Got two problems : first, xlr are not working with my mic (k6 me66 sennheiser). Second, there is quite a hudge latency issue. I send back this monitor to test it out, an the problem wasn't my model, but the product itself. I can say so because they took so much time... That they changed it, because they couldn't find any issue in there lab... But obviously, my videos showed issues ! I'm using it over HDMI, using an X-T3. Do you notice some latency issue with this 5" monitor ? Thanks for your videos and feedback !
@@JustinPhillip okay great, good to know ! I'm one man crew... So need professional sound recording capability. As I don't get xlr on my cam, I though it was a good solution... But got troubles haha I'll do some test with some mics and HDMI over sdi with an fs5 which got sdi and HDMI. Thanl for your answer !
Would you know if it is possible to record the EVA1 5.7K RAW output to the Blackmagic Video Assist 12G monitor/recorder in the original ProRes format? I have clients that want 5.7K footage, but may not be able to work with ProRes RAW or Blackmagic RAW formats. Sorry if this has been asked before, but my search results only mention PRR and BRAW formats.
Great video, looking to get a BM VA12g soon! SUBBED! I see you have the BMP4k, what are your thoughts on the 6k? Personally I think its a better fit for me since i have so much Canon glass.
@@JustinPhillip thanks! I got the 6K examples from the black magic website. It's amazing what they were able to accomplish with a camera that costs so little
@@JustinPhillip I just now read that in firmware 3.5 they aded aditional calibration. Is it like a white ballance and tint slider or some complicated way of calibration ?
How does the OS for this compare to the Portkeys bm5? Looking into purchasing one of these two just for monitoring purposes so recording doesn’t concern me as much. Which body weighs more? And what’s your overall recommendation between the two?
oh, if you're not into the recording capabilities, just go with the PortKeys, you'll save money, and the unit is lighter ( not by much). The build quality of this Video Assist is LOADS better though, i will say that.
So I’m probably going to sell my Shogun Inferno complete kit and get this. BRAW on the Eva1 would be dope and hopefully on the S1H soon. Plus, a 5” is better than a 7” when you have it on camera all the time. Any recommendations of sites for selling used Atomos products?
@@JustinPhillip ya unfortunately the Inferno just isn’t as popular anymore. Might have to sell to a company and take a hit on the money I’ll get back. Know of any decent companies that don’t rob is selling gear?
Hey Buddy, quick question, I have a ⚠️ symbol on my Lcd and can't record. It will be stopped after 2 seconds, I turned in the drop frame rate and it doesn't allow me record. maybe you should make a video of it
Pouya Ramzi Never experienced that before. Contact Blackmagic. Or your monitor is getting too hot for some reason. What kind of batteries are you using?
I have a Canon M6 Mk2 camera, it does 4K 30fps, would this monitor give me better video quality than my camera? Or would I need to upgrade my camera to benefit from this monitor?
Hi Justin, thanks for the great review! Can this downscale the 4K input to HD, like the Ninja? So I could use an affordable wireless transmitter for video village.
Just started Playing the video. I’m underneath my car changing my catalytic converter. I’ll come back and watch it again. Anybody have $665 for a new one? . Holy moly. Expensive things. Movie gear. And catalytic converters!!!
Hi justin, I need your help choosing the right video assist. I could see more codecs and video formats listed in Atomos ninja V and Atomos shogun 7 than in the Blackmagic video assist. Are they having same recording versatility or am I reading it wrong?
Justin. I have the Production 4k and LOVE the image much more that the Pocket 4k. Do you think it's worth it to buy one of these to use with Production cam so I can get BRAW or get the Ursa Min Pro 4.6?
I was about to get a Shinobi then I remembered your video about the SmallHD 702. Now I'm seeing you've moved on again to the Blackmagic Assist. Can I ask for your recommendation for someone that mostly shoots one-man-band with my own BMPCC 4k, so I don't really need to DP on a lot of other people's cameras. Whatcha think?
well, like i said at the end of the video, i've owned this one since February, and i'm still using it...that's the longest I've ever had any monitor. After you use this new HDR video assist, no other monitors are going to satisfy you the same. Maybe a smallHD Ultra Bright or OLED, but this blackmagic gives you more bang for your buck, IMO. Also, smallHD have horrible QC. Whereas Blackmagic are still fine tuning this new monitor, they just updated the firmware again a few days ago.
@@JustinPhillip I just feel like I'm going to waste its added functionality as I don't need the external recording or proxy files, so a good portion of its high cost will sting that much more.
Charlie Cooper smallHD does have a nice OS , or PortKeys, they make really nice monitors as well, and super affordable. I just did a video on one of their new little monitors
Have you experienced lag? I got the assist 12g 7" when it first came out, but it was lagging and heavy. I still have it, but thinking of buying a smallhd that's lighter and hopefully doesn't lag as much.
Justin, have you tried or does it work to use the BMVA as an SDI to HDMI converter to a camlink or the new raven eye? I would like to get the 7' for audio with my komodo but also need a converter so I was hoping this would do both. Thanks
@@JustinPhillip Thanks, so the Video Assist will start recording because I clicked record on the camera? My camera has a lanc port so that would work. I want to mount my BMPCC on top of my Sound Devices recorder to make the setup more compact. Which means no access to the SD card compartment. Hence recording on the 12G VA. In retrospect I'm thinking I should have bought the 7" version. You get a lanc port on that one.
Hi Justin, great video. One question-I'm looking for someone to help me clarify one thing-I'm using BM 6K Pro with Video Assist 7" SDI connected via HDMI cable. As far as I have noticed I only get 1080/24 on Apple ProRes codecs! No BM Raw, no 4K! Is there a workaround around this-I'd need at least 4K/48. Can it be done with the BM Micro converters HDMI-SDI?
@@JustinPhillip The new one-HDR 12G SDI. I've updated it yesterday yes. I think it was 3.5 version. Is it possible that HDMI cable isn't strong or good enough? Can a BM Micro converter HDMI to SDI solve this problem?
@@twkprodukcija i think the problem is that the Pocket cameras only output 1080p via HDMI, any recorder is limited by the output settings of the camera
How do you change the white balance on this monitor? The colors are SO different than on the camera and I don't see anywhere to make adjustments to white balance. I've messed with contrast and saturation but my camera image is warm at 5600 and on the monitor it's completely cool. Help!
@@JustinPhillip I do! It doesn’t matter what white balance I put my camera at, there’s always a blue tint in the monitor. Shot an event yesterday at 3200 to match the stage lights and the monitor looked insanely different. It was really frustrating
@@Damonjamesduke hmmm...that is strange. What is your cameras output settings? do you have some weird LUT turned on the monitor or your camera’s output?
Dummy Batteries come in 2 flavors. One is "ANY voltage, pass through", with no transformer/regulator. The other is "higher voltage (V mount?) transformer/regulator to 7.2 volt output". Be very careful about the dummy batteries output. Test it with a volt meter to assure yourself, and look for good reviews. DANGER. Never buy the 1st one I mentioned above.
My Gear List: kit.co/jpOnFilm
It is only when you watch a review by someone like Justin who really and truly knows his stuff -- that you realize that most of the YT product reviews are pretty much low-grade self-promotions.
Frank Farago Wow! I Appreciate that! Thank you! You would be surprised how many companies i turn down because they want me to sign a contract and demands. And i just wont do it.
This was a great video. You seem very trustworthy, honest and CREDIBLE, which can't be said about some CZcamsrs. I just subscribed!
Thanks! I appreciate that
One thing I hope BM add is remote control of the P4k/P6k via HDMI like they did on the ATEM Mini ! (I wish all touch screen Monitor add this feature actually hehe). This would allow a clean feed from the camera YET keeping the OSD informations, and it would allow for all angle touch screen support (including on camera zoom from the 4k/6k sensor). They might easily do that when you press the setting option, a popup occur asking if we want to configure the monitor or the pocket. And routing feature so we can decide what is output via SDI or HDMI Out (Not sure if it passthough or not). If I were doing job where I wasn't responsible in the end of media offload, then it could be a problem it could be more interesting like you said, but I always end up with a copy of the media which is stored locally and uploaded to a server in a datacenter. As for disconnecting the monitor and bring it with you during lunch is really interesting... Right now, I bring my computer and do my own offload if needed during lunch, which I can wireless feed via the HDMI out my screen to multiple devices, but that bring the media to an unsecure location which isn't great (But fine for the short film stuff I'm doing). If BM implement the feature I said at the begining, I'm pretty sure I'll be buying one, but until then my current setup with 2200nit screen on camera does the job. One thing that worries me is those tiny SDI connector... I see larger SDI connector on camera being damaged and being intermittent, so I'm not sure about those tiny connector (I saw review from the Hyperdeck shuttle 2 that those SDI connector does get broken easily)
Thanks for the review! This is a monitor I’m interested in. I currently use the Atomos Shinobi SDI with my EVA1. I like the monitor (especially having the SDI because it lets me use the square peaking option from the EVA1... for some reason the box peaking doesn’t work with HDMI) but it does run a bit hot! I don’t feel the need to have an extra backup of my recordings yet... and the battery life with the Shinobi is good with the large Sony battery. Still... I might pick one of these monitors up one day! We will see.
Fantastic video thanks Justin
thank you
Brother! Not gonna lie you have now tempted me into getting this thank you! Hope all is well with you!
🤣🤣 Oh no!!! You won’t regret it bro! 🙌🏼💯 Are you holding Vegas down over there?
@@JustinPhillip haha! After watching that review I know I won't regret it! Right now I am just lucky to have my news job which has been taking up a lot of time. Also not seeing to many productions going on in Vegas right now too. How's it going where you are at?
Had this monitor recorder since it came out it is a great product but not been without its issues (colour shifts when changing modes incorrect lut display ) these were partially corrected with firmware updates but I h had to send mine in for repair due to purple fringing on the edge of the screen it was sent back from Blackmagic with the engineers saying it is a known fault and they are looking into it. So yes a good monitor but not without its faults and the usb c port is in a stupid place why not on the side.
Awesome product again now I have another choice to review and go over and research to see how it will Fit for me, i also shoot rather frequently and would love the option to walk away with footage for my reels... awesome awesome product... this might be my option, I’ was about to press “buy now” and purchase the Atomos Ninja V package 📦 for the size and also the features... but lemme study this blackmagic design video recorder and see... so for now the $1675 budget has been blown yet... thanks again, I also need to link up with you on your other platform to continue this and many more conversations... I can tell we’re gonna work together soon...
As an Atomos Shinobi owner, I can certainly agree that their products are not what they are cracked up to be (I detest mine). I especially doubt that its claimed 1000nits is anywhere near that value, given that its brightness is very close to one of my cheap Feelworld 450nit monitors. I have had to set the Shinobi to B&W mode recently just so that I can focus accurately in daylight. My Feelworld Ultra Bright 7" is miles ahead of the Shinobi, but I need a bright 5" monitor for my smaller rig so there's no point in getting another 7". I've been pondering the 12G VA 5" for a while and it sounds like it might be worth getting and, as I'm purely a BMPCC4K user, the SDI isn't of any value to me. I'm hoping that Blackmagic updates (or is able to update) the VA so that it can record BRAW from a P4K/P6K. That would be the icing on the cake.
A month has gone by and recently I decided to go for the Blackmagic 12G VA 5". What a difference! It makes the Shinobi look like a third rate, cheap piece of rubbish. What I'm especially cuffed about is the clarity of focus assist, even at half brightness it allows me to focus accurately, even on dimly lit subjects.
As an aside, I have an Atomos coiled HDMI cable that doesn't play nicely with the VA, constantly losing signal, so I replaced it with a cheap flat cable and nary a problem. And Atomos has also designed the mains adapter so that it won't work on the VA. Coincidence or what?
Thanks for this review! I am about to send back my Ninja V because I have dupe frames (duplicated frames) in my Prores HQ footage. Which is very annoying because it renders the footage unusable. Also: I do not like the "legalize" workaround that Atomos has implemented on their monitor, ridding us of HLG/PQ monitoring in doing so. I will order the BM Video Assist this week. I am looking forward to being able to film in B-RAW with my S1H and grade in Davinci, which is not possible with Prores RAW. Also: the Prores RAW workflow is very convoluted in FCPX.
Love your channel you tell it clear and straight ... I've learned a lot
Great! Thank you! 🙏🏼🤘🏼
I love using my Ninja Flame 7inch 4K HDR monitor recorder upto 4K 60fps. Works so well.
Good video!........
Thanks for sharing Justin 😊😊
Great video, Justin. Really enjoying all your videos thus far. Keep it up. Thinking about getting one of these for my c300mkii. Also, i had the same issue with the samsung ssd... usb-c port fell apart within two days of use and I couldn't recover what was on it. Luckily I already had it backed up elsewhere. Now I only use the Sandisk extreme pro ssd's and they are amazing.
awesome, man! we're the converted ones! LOL.
you need to move over to HDR man
shooting an HDR monitor in SDR :)
Hey, do you still have this monitor? If so, could you please tell me in the anamorphic de-squeeze feature, does it have the 1.5x amount? (ex: 1.33, 2x, etc) Thanks for the help!
I don’t want a 7inch but I think that might be a nice audio solution to the Komodo
this one is 5in.
Thank you for this great video! I got a question for you. Is it possible to use AF tracking focus (face and eyes) on Sony a7 Mark III using Blackmagic Video Assist?
would LOVE to see how things gave changed since the RED.
nothing, i still use this
I actually have it stated in most of my contracts that I get a copy of the footage or at least a portion for my reel and advertising.
Yeah, some people be shady tho 🤷🏻♂️
@@JustinPhillip True Dat.
Great video. Really cant afford it. Thanks for sharing your experiences.
Makes me want to sell my Shogun 4K and pick one up to use with the pocket 4k...
Billy Tait Yeah buddy! You wont regret it!
I've help others on set with P4k, and one thing I've seen is people freaking out that it missing footage on their SSD drive and playback didn't work... Then for me to come in and open that Media card of the pocket and take out their SD Card in there ! Some USB-C Cable act weird which can cause issue depending of your operations. As for connector becoming damaged, that mostly operator error I would think, especially if it loose going up and down. If it goes in but just don't feel the resistance to keep it in, then that different. In my setup, I never touch the USB-C connector in camera, it permanently affixed to the Smallrig T5 holder, and I just pull out my T5 drive from it socket. This mean once the T5 drive get to the connector, it is always aligned correctly. Also even if it become lose, it not a problem (until I go the PC), but if it does become loose, it time to change the drive.
I wish they supported Blackmagic RAW for the Fs5. So far they only Support Panasonic AU-EVA1 and Canon EOS C300 Mark II
hmmm sony prolly got a deal with Atomos for ProRes RAW
@@JustinPhillipI know they do, but I like how you can save on an SD card.
You make some good points, especially about the 12g SDI connections and cable, except shooting with a 1080 limitation is not helpful. Need to get a camera that shoots 4k over HDMI ( and SDI). Maybe I do not understand you correctly though.Your camera only outputs 1080 over HDMI?
Can you also start the camera recording from the monitor remotely (the other way arround) ? Thank you so much :) your are a life savior!!
@Justin Phillip, Does the video assist support Luts? If it does you could hook it up to your computer and a color calibration tool to create a calibration LUT. The downside is, that you'd have to output your display LUT via the camera and toggle it on/off for recording. Maybe you could also create a combined LUT that includes both the calibration and the display LUT, but you'd have to test if that gives the desired result.
Florian Koch Visuals yes it has 3D LUT support, this may actually work, because the video assist doesnt burn in the display LUT
@@JustinPhillip Nice. If you try, please let me know how the results are 👍
How did this turn out? Lol curious
Great update
🙏🏼
Another hit video.
at the end small hd is the iwnner not black magic
this is true 😆
Hi justin! If i press record on the video assist, would that be able to also trigger the pocket 4k to record as well?
im thinking about getting this for unreal engine does it record good 4k same as the camera?
guess u answered that lol
Why use a dummy battery an not the 12v external power connection?
I have a BMCC 6K Pro. Ive bought this 7' version. What is the best HDMI cable to link the pair up as all the cables I'm seeing say it won't show 4k at 60fps but I'm filming at 4k at 120fps sometimes. I won't use it to record as recording off my 6k pro but want a cabkle that will allow me to view my footage.
Also use Alvins or Tilta cables and run everything off one V-Mount. Also no dramas. Do you know if I can use the Video Assist purely as a monitor and a remote run/stop trigger for the Pocket 4K?
I am researching monitors myself. Watching reviews of Atomos they mentioned problems with "ground loops" also when powering more than one device from the V-Mount batteries. I do not understand it all either and have not seen yet any scientific explanation from anyone, say, for example, a video device or electrical engineer. I am not an electrical engineer, but an engineer, and I am guessing there is some stray voltage leaking somewhere when combined with certain devices and certain configurations, which can go over the "internal resistance limit" of what some device can handle. So perhaps the problem is also due to some poorer quality devices being attached to the configuration? It is difficult to imagine that it is just an internal design problem.
Great video. I am looking for an on camera monitor and I can't decide between this one or the SmallHD Cine 7.
Which one would you buy and why?
I think the video answers this question
Kind of a Shame you can’t output anything higher than 1080 with the pocket 6k
I do have one question. In your view, how much better do you consider the VA when it comes to focus assist compared to any 5" Atomos monitors you have/have used? A 7" high nit monitor clearly has advantages when it comes for focus peaking, but I haven't had the luxury of comparing such to a 5" monitor.
Australian Image Well, i’ll put it this way. For my talking heads, and pulling focus of myself with my tilta nucleus nano, it’s easier for me to see it on the 5” video assist than it is to see it on my iPad Pro (which is larger than 7”) . Focus peaking turned on both btw. This HDR video assist is the sharpest, cleanest monitor i have ever used. And if you been on the channel for a bit, you know how many monitors i’ve tested out. 👌🏼
@@JustinPhillip Thanks for that. My frustration with the Shinobi has kind of reached a peak. All activities in our neighbourhood across the pond are still lockdown, but once things start moving again, I don't think I can keep going with the Shinobi, especially once summer rolls along.
Sweet 🙏😍
first of all love your content, second you mention this can record log 4k60 is this with specific cameras? or any camera I currently own a nikon z6II and with the atomos ninja V new version im top at 4k30 log
Some specs like that unfortunately are limited to what the camera will allow
@@JustinPhillip so even with red camera is not possible to output such settings? im looking into buying one
Great video! Just one question. How long does the battery actually last? Lets say with two medium sized batteries. NP-F770 or whatever they are called.
Here's a more detailed review, i address power around the 25 min mark. I honestly cant remember, i never use it with batteries: czcams.com/video/7ut5fA4wsHs/video.html
As for cameras and monitors (HDMI ports is what I hear mostly) shorting out, would it be something as simple and easy to as turning off/on the wrong thing in the wrong order? Like too much power being routed to something if something else is turned off? I've also heard, like you said, it tends to be a cheap cable issue, so... I want to run everything off a single V-Mount, but I'M SCARED! 😅
Hey Justin, can you output an HDMI signal when your inputting from SDI. I use SDI out of camera but want to send a wireless signal out through hdmi for others to monitor.
yupp, do it all the time
@@JustinPhillip thanks for the quick reply, really appreciate it. Love your work
What would be the minimum brightness in nits if you were shooting in bright daylight?
I was using v mount batteries and a good cable and it still fried my camera sdi out. Just something to look out for. As a matter of fact, it was an Alvin cable. Lesson learned, don't hot swap, bad habit. Lesson learned.
hot swap...interesting...dang, the monitor blew it out? on what camera?
@@JustinPhillip the old school cinema camera
What are your thoughts about Nikon announcing the Z cameras supporting black magic raw
I just ordered that black magic assist for my z6 thank you for the review
i think this monitor is a game changer. HDR 10bit for under a grand is insane enough, but the fact it also records. 🥳
How is the POWRIG dummy holding up? I have Core-SWX (Switronix) version and it shuts off the VA if I go past 50% Brightness. Depending on your results, I'd be looking at either the POWRIG solution or just going with a regulated 12V cable.
I never had any issues with the PowRig
Is it possible to record the computer screen?
I'm thinking of grabbing this monitor when the new BM Pyxis comes out. Is this the best sdi monitor or are there better options?
I mean this video is pretty old. Nothing beats smallHD OS
@@JustinPhillip Justin, there is no up to date video on CZcams that compares BM OS vs SmallHD. This would be SOOO helpful. I understand SmallHD is the standard choice and likely for good reason, but what is is specifically in the OS vs Blackmagic? Thanks!
What if you already have a Blackmagic 6k. Can you operate the camera with the screen?
Hello Justin, do you know if I can control de camera settings with this monitor ?! I have a broken screen on my BM and I'd like to know if I have a total control of the recording in the camera itself ... Thanks
no i dont think you could
Hey !
I choosed a Video Assist also, and took the 7" over the 5" because of internal XLR plug in...
Got two problems : first, xlr are not working with my mic (k6 me66 sennheiser). Second, there is quite a hudge latency issue.
I send back this monitor to test it out, an the problem wasn't my model, but the product itself. I can say so because they took so much time... That they changed it, because they couldn't find any issue in there lab... But obviously, my videos showed issues !
I'm using it over HDMI, using an X-T3. Do you notice some latency issue with this 5" monitor ?
Thanks for your videos and feedback !
latency is much less with the 12G SDI, but HDMI does have latency issues. I'm not really an audio guy, so can't say too much on that
@@JustinPhillip okay great, good to know ! I'm one man crew... So need professional sound recording capability. As I don't get xlr on my cam, I though it was a good solution... But got troubles haha
I'll do some test with some mics and HDMI over sdi with an fs5 which got sdi and HDMI.
Thanl for your answer !
My camera only does 3g SDI out. Is the 12g SDI out backwards compatible?
Aleksandar Kuraica oh yea, it will still accept a lower SDI. It’s the same as an HDMI that takes up to 60fps. It can always down rez
7:22 you compared your 5 inch monitor to a 7 inch Atomos monitor I think, so of course the 5 inch is smaller.
Would you know if it is possible to record the EVA1 5.7K RAW output to the Blackmagic Video Assist 12G monitor/recorder in the original ProRes format? I have clients that want 5.7K footage, but may not be able to work with ProRes RAW or Blackmagic RAW formats. Sorry if this has been asked before, but my search results only mention PRR and BRAW formats.
Great video, looking to get a BM VA12g soon!
SUBBED!
I see you have the BMP4k, what are your thoughts on the 6k? Personally I think its a better fit for me since i have so much Canon glass.
Thanks! I compared those two cameras 8 months ago. Check it out: czcams.com/video/vgd77ZUPaoI/video.html
@@JustinPhillip thanks! I got the 6K examples from the black magic website. It's amazing what they were able to accomplish with a camera that costs so little
Hello, can I use on the 7 inch 4K also the ssd via usb after firmware update?
Did you encounter a pink, warm magenta color shift on your display of Video Assist ??
Dont recall, there is an option to calibrate manually
@@JustinPhillip I just now read that in firmware 3.5 they aded aditional calibration. Is it like a white ballance and tint slider or some complicated way of calibration ?
All i can say is thank god- its not a one click to buying products after your videos. I’d be (more) bankrupt
LOL
CAN YOU TAB TO FOCUS?
Should I choose 5" or 7"?
i find 5” more manageable for on board monitor. But, i did end up selling the 5” and got the 7”, mainly for the full sized SDI
link to your shoulder rig/ back pack rig?
www.kit.co/jponfilm
Thanks man. Can you use the monitor to adjust focus points and start/stop recording?
yes
@@JustinPhillip thank you.
can u controle the bmpcc 4k with the monitor?
How does the OS for this compare to the Portkeys bm5? Looking into purchasing one of these two just for monitoring purposes so recording doesn’t concern me as much. Which body weighs more? And what’s your overall recommendation between the two?
oh, if you're not into the recording capabilities, just go with the PortKeys, you'll save money, and the unit is lighter ( not by much). The build quality of this Video Assist is LOADS better though, i will say that.
So I’m probably going to sell my Shogun Inferno complete kit and get this. BRAW on the Eva1 would be dope and hopefully on the S1H soon. Plus, a 5” is better than a 7” when you have it on camera all the time. Any recommendations of sites for selling used Atomos products?
not sure. fb market and ShareGrid is whats most popular out this way
@@JustinPhillip ya unfortunately the Inferno just isn’t as popular anymore. Might have to sell to a company and take a hit on the money I’ll get back. Know of any decent companies that don’t rob is selling gear?
Hey Buddy, quick question, I have a ⚠️ symbol on my Lcd and can't record.
It will be stopped after 2 seconds, I turned in the drop frame rate and it doesn't allow me record. maybe you should make a video of it
Pouya Ramzi Never experienced that before. Contact Blackmagic. Or your monitor is getting too hot for some reason. What kind of batteries are you using?
fire....
I have a Canon M6 Mk2 camera, it does 4K 30fps, would this monitor give me better video quality than my camera? Or would I need to upgrade my camera to benefit from this monitor?
i think you would have to check the specs on your camera and see what it’s capable of outputting via SDI/HDMi
@@JustinPhillip Will do, thank you.
It says hdmi hdr on, clean fhd, and 4k output, h.264.
Hi Justin, thanks for the great review! Can this downscale the 4K input to HD, like the Ninja? So I could use an affordable wireless transmitter for video village.
yes, have to down convert via whatever camera you’re using
@@JustinPhillip So if this is recording Raw, the Hdmi or SDi output cannot be HD by the Video Assist?
@@hajagosb not sure. I’m pretty sure it is all dependent on whatever camera you’re using and what it’s able to output
Have that same vx1000 air freshener! Haha
Whaaaat?!? You do?! LOL 😂 CCS??
Hey Justin, has your opinion on this one changed? Do you still think it's the best monitor in it's price category? I'm about to pull the trigger now.
I still use it. Daily. Check out my instagram stories.
@@JustinPhillip Good to hear! Yes, will do!
can i control the bmpcc with this monitor?
Just started Playing the video. I’m underneath my car changing my catalytic converter. I’ll come back and watch it again. Anybody have $665 for a new one? . Holy moly. Expensive things. Movie gear. And catalytic converters!!!
HAHA you're a wild man!
couldn't fine the link to that SDI cable you mentioned in your description
amzn.to/3dYNmi9
instaBlaster...
Can you link that SSD clamp you showed?
here ya go! amzn.to/32HDYfv
@@JustinPhillip My man. Thank you
Did BM fix the latency issue?
Hi justin,
I need your help choosing the right video assist. I could see more codecs and video formats listed in Atomos ninja V and Atomos shogun 7 than in the Blackmagic video assist. Are they having same recording versatility or am I reading it wrong?
Thare Production More codecs? Such as what?
Justin. I have the Production 4k and LOVE the image much more that the Pocket 4k. Do you think it's worth it to buy one of these to use with Production cam so I can get BRAW or get the Ursa Min Pro 4.6?
Does the production 4K output BRAW?
@@JustinPhillip It outputs CNG RAW
@@MyronDavismd You’d have to do some research and see if you can record BRAW with that cameras. Its only able to do BRAW with certain cameras
Will the 12v to D tap cable I have from the last video assist work with this one as well? Thanks!
dont see why not. Was the 1st gen a screw on 12v, because this one is
What's the video quality like compared to a SmallHD 702 or 703? Miles away or pretty reliable?
DriveVice Wish i knew! I ordered the 503 UltraBright but it arrived to my house broken
Can they not record 1080@ 120fps?!
I was about to get a Shinobi then I remembered your video about the SmallHD 702. Now I'm seeing you've moved on again to the Blackmagic Assist. Can I ask for your recommendation for someone that mostly shoots one-man-band with my own BMPCC 4k, so I don't really need to DP on a lot of other people's cameras.
Whatcha think?
well, like i said at the end of the video, i've owned this one since February, and i'm still using it...that's the longest I've ever had any monitor. After you use this new HDR video assist, no other monitors are going to satisfy you the same. Maybe a smallHD Ultra Bright or OLED, but this blackmagic gives you more bang for your buck, IMO. Also, smallHD have horrible QC. Whereas Blackmagic are still fine tuning this new monitor, they just updated the firmware again a few days ago.
@@JustinPhillip I just feel like I'm going to waste its added functionality as I don't need the external recording or proxy files, so a good portion of its high cost will sting that much more.
Charlie Cooper smallHD does have a nice OS , or PortKeys, they make really nice monitors as well, and super affordable. I just did a video on one of their new little monitors
@@JustinPhillip Nice, just saw it. Halfway through now. I also have the Tilta focus side handle so it might be a good option. Appreciate the help.
Would this work good with the Sony a7siii?
IN THE WORKS MEDIA I don’t see why not
Cause if it does that would be dope to record the footage on to the t5 and would be cheaper as well for storage
Hey man, quick question... The bmpcc4k has SDI out?? I feel like a buffoon asking, but I don't see it anywhere.
no it sure doesnt. But the Hollyland Mars takes SDI 😎 But also cameras like RED & ARRI
Have you experienced lag? I got the assist 12g 7" when it first came out, but it was lagging and heavy. I still have it, but thinking of buying a smallhd that's lighter and hopefully doesn't lag as much.
No havent noticed that. What camera are you using. Different cameras have different latency issues with HDMI
@@JustinPhillip true, I was using it with the Sony a7iii. But now have the bmpcc 6k, but haven't done a lot of testing
Justin, have you tried or does it work to use the BMVA as an SDI to HDMI converter to a camlink or the new raven eye? I would like to get the 7' for audio with my komodo but also need a converter so I was hoping this would do both. Thanks
I use it like that with my Komodo. It can cross convert
@@JustinPhillip thanks that’s great
@@Jackwyldes I actually just released a video demonstrating this
@@Jackwyldes czcams.com/video/bKzAHL2ZLS0/video.html
Can Blackmagic Design Video Assist 7 Inch 3G SDI HDMI Recorder Monitor operate BMPCC4K via Micro Converter
BiDirectional SDI/HDMI 3G???
If I wanted to up res to 4k from another camera would I have to use an SDI?
i dont think up-rez is an option. the monitor just accepts whatever your camera is capable of outputting via HDMI or SDI
@@JustinPhillip thanks so I'm recording for a sony and in camera its at 1080 23 but on the monitor format it says 1080i 59.94 do you know why?
@@windbender1639 you gotta tap into your camera’s menu settings and see what its outputting.
Could this monitor support raw recording from the Sony A7S3?
Yes since the monitor records PRORES.
Without a lanc port, how do you hit record without using the screen? I hate bumping the monitor at the beginning of every clip.
Doll Hausen just the old fashion way, hit record on ur camera
@@JustinPhillip Thanks, so the Video Assist will start recording because I clicked record on the camera? My camera has a lanc port so that would work. I want to mount my BMPCC on top of my Sound Devices recorder to make the setup more compact. Which means no access to the SD card compartment. Hence recording on the 12G VA. In retrospect I'm thinking I should have bought the 7" version. You get a lanc port on that one.
Doll Hausen it does rec command thru hdmi
@@JustinPhillip Bummer, it doesn't work for the OG BMPCC, just the Micro and the P4K and P6K.
Yes it does...
Did I win one?
I’m a fanboy, but the sigma looks more interesting now...
Friend, please say. Do you have a Crane 3S now? I need to check something. I suspect my Crane 3S is not working properly. Can you help me ?
its gone baby gone 🔥🔥
it’s SOLD
Justin Phillip where did the child go? which child ? whose child? 🥱🙃🤷♂️🤷♂️🤷♂️
Hi Justin, great video. One question-I'm looking for someone to help me clarify one thing-I'm using BM 6K Pro with Video Assist 7" SDI connected via HDMI cable. As far as I have noticed I only get 1080/24 on Apple ProRes codecs! No BM Raw, no 4K! Is there a workaround around this-I'd need at least 4K/48. Can it be done with the BM Micro converters HDMI-SDI?
are you using the new HDR video assist or the old one? And are you on the latest firmware?
@@JustinPhillip The new one-HDR 12G SDI. I've updated it yesterday yes. I think it was 3.5 version. Is it possible that HDMI cable isn't strong or good enough? Can a BM Micro converter HDMI to SDI solve this problem?
@@twkprodukcija i think the problem is that the Pocket cameras only output 1080p via HDMI, any recorder is limited by the output settings of the camera
@@JustinPhillip Than what's the use of such a monitor on 6K Pro? Full HD isn't enough for me-Micro converter can't solve my problem?
@@JustinPhillip I mean, just the fact that it doesn't support BM Raw Codecs when connected to the BM camera is such BS!
How do you change the white balance on this monitor? The colors are SO different than on the camera and I don't see anywhere to make adjustments to white balance. I've messed with contrast and saturation but my camera image is warm at 5600 and on the monitor it's completely cool. Help!
do you have the latest firmware?
@@JustinPhillip I do! It doesn’t matter what white balance I put my camera at, there’s always a blue tint in the monitor. Shot an event yesterday at 3200 to match the stage lights and the monitor looked insanely different. It was really frustrating
@@Damonjamesduke hmmm...that is strange. What is your cameras output settings? do you have some weird LUT turned on the monitor or your camera’s output?
@@JustinPhillip nope
@@JustinPhillip shooting on the pocket 6k*
You find your 35mm 1.4?
still lookin lol
Justin Phillip I wonder if you rarely use 85mm?
Dummy Batteries come in 2 flavors. One is "ANY voltage, pass through", with no transformer/regulator. The other is "higher voltage (V mount?) transformer/regulator to 7.2 volt output". Be very careful about the dummy batteries output. Test it with a volt meter to assure yourself, and look for good reviews. DANGER. Never buy the 1st one I mentioned above.