I like very much the welded aspect of the junction of the handle with the mug that is visible in the image of your video. But I don't see it in any part of video. Isn't it a Freecad feature? Thanks in advance.
Face binder after input of text by shape string in draft workbench,then transform the face bind text string to sketch workbench.Going back to part design & click on the curve surface,press the icon of map sketch on face.In curve workbench,pressing the text sketch icon in model will result in shifting to sketcher workbench,then pressing' construction transformation ,selection icon' & selecting the text consequently,by closing the task shift back to curve workbench.Finally,selecting curve surface & text sketch then press map sketch on surface gives the result.Amending the data in table for intended size & direction of this text can finish the job.
I don't know what I am doing wrong but when I try to use project sketch in curves workbench it has sketch_on_surface but with an error and I do not see the projected surface. I also did the blue box with no luck.
Hello Mads, I would like to combine the Sketch_on_Surface with the cylinder, either as an emboss or deboss to 3d print, but I cannot use boolean on neither Part nor PartDesign Workbench, do you have any ideas?
At 6:55, there "Reverse V" is selected in the "Touchup" section. I do not have this "Touchup" in the property view panel. Would you know how to enable it? (I'm using version 18.4, and just loaded 0.19 and it is still not there). Thank you for this very helpful video!
@@madslethdanielsen2099 I did, and same issue exists for me. Curves Workbench installed OS: Ubuntu 20.04.1 LTS (ubuntu:GNOME/ubuntu) Word size of OS: 64-bit Word size of FreeCAD: 64-bit Version: 0.19.23074 (Git) AppImage Build type: Release Branch: master Hash: 74b866ed3022fd1452c534dae31a721bcc668f2f Python version: 3.8.6 Qt version: 5.12.5 Coin version: 4.0.0 OCC version: 7.4.0 Locale: English/United States (en_US) May I ask which build of 0.19 you are using? Attached example of a file I could not get to work. www.dropbox.com/s/krolnqngf13fc1o/text%20on%20cylinder.FCStd?dl=0 I posted this question in the freecad forum: forum.freecadweb.org/viewtopic.php?f=3&t=45307&sid=b63526fd38d625e9cbc110cd57102978&start=10
Cool! I wish I could get it to work. I use 0.19 and when i try to map sketch on surface in Curves WB I always get the same error message: Maximum recursion depth exeeded while calling a python object. :( EDIT: Apparently it didn't like the font I used.
I was able to make it work now. I tried to create a bowl like a cone with slanted walls and I guess FreeCAD didn't like that. There are probably more steps involved.
No just select in the left side the things you want to be in the step file hold down the ctrl key while you're doing it. Then select export to stl in file menu. Best regards mads😜🇩🇰
@@madslethdanielsen2099 Thank you. As I have no printer, I must send my jobs to a vendor via email as a single file exported from FreeCAD. I now believe exporting via 3MF is the way to do this. I need to print white embossed letters inside a black material via a single importable file for my vendor. This is my difficult goal.
Hello Mads, I have tried to follow this and when I use the curves workbench to attach the sketch to the face of the cup I get an error " 'Sketcher.SketchObject' object has no attribute 'getConstruction' " Do you have any suggestions? I unistalled and reinstalled the curves workbench and my build of FC is 23463 which is pretty recent. Thank you for the videos and any help. Happy New Year.
Hi Mads, I finally got it. I am not sure what did it but I think it was the order in which I had selected the sketch versus the surface on the curves workbench. I also downloaded the latest build going from 19.23463 to19.23546 but I don't know if that was it as it was still newer than the version you used. Thank you again for the video.
Hi there. I have the same problem as Bruce Williams. Do you have any other solution to it? I tried several things but i just can't get it done. Thanks.
@@deepescape6497 install freecad 0.19 neweste. you can not make text on object mait in part wb. 1 make a object in part design wb. 2 make text in draft wb convert the text to a sketch dobbel click the sketch open it drow a blue squar box awarount 3 go to part design select the object select icon map sketch on face select the sketch cuse intersection cs. 4 go to corve wb select the face of the object wher you want the text hold the control key select the sketch. select icon map sketch on face BR.. mads
I've tried this approach and the funny thing is, when I export it to STL, the text won't go along with the conversion. It's just the cup without the text. What did I miss?
I gave up - I'm not sure if what I did is 'best practice', but I just went to Part workbench and do a "Make a union of several shapes". That solved my dilemma. :-D
Hi Mads, thanks for this video! I'm making a camera filter adapter (shape is like two different size nuts stacked on top of each other), I'm using the spreadsheet to make it parameterized. I have it working such that the model resizes when I adjust the spreadsheet.AdapterSize value; I thought it might be nice if I could emboss the size of the adapter onto its side along it's outer top ring in the same manner as filters and lenses do... As the text is dynamic (it could be "49mm" or "52mm" depending on the AdapterSize value), I don't think the approach of converting a ShapeString into shapes would work would it? Was wondering if you might know of another way? If not, no biggie. The model I'm using is here (forum.freecadweb.org/download/file.php?id=157530), should you want to check it out. Cheers!
I've learned a lot of confidence and knowledge about FreeCAD just by following your relaxing videos. Thanks a lot, Mads.
Thank you, Mads. Just what I have been looking for.
Good that you can use it have a nice weekend from 🇩🇰 Danmark
You make it look easy. ;)
Thanks for the video, will come in very handy one day
Very helpful, thanks a lot!
Great tutorial. Thank you.
Thanks a lot!!!!!
I like very much the welded aspect of the junction of the handle with the mug that is visible in the image of your video.
But I don't see it in any part of video.
Isn't it a Freecad feature?
Thanks in advance.
Face binder after input of text by shape string in draft workbench,then transform the face bind text string to sketch workbench.Going back to part design & click on the curve surface,press the icon of map sketch on face.In curve workbench,pressing the text sketch icon in model will result in shifting to sketcher workbench,then pressing' construction transformation ,selection icon' & selecting the text consequently,by closing the task shift back to curve workbench.Finally,selecting curve surface & text sketch then press map sketch on surface gives the result.Amending the data in table for intended size & direction of this text can finish the job.
Thank you very much sir. Learned some very useful tips.
Good work :) Thanks
2:40, padding 2D offset is no longer working in 0.19, you have to use extrude in Part workbench.
I don't know what I am doing wrong but when I try to use project sketch in curves workbench it has sketch_on_surface but with an error and I do not see the projected surface. I also did the blue box with no luck.
Thank you subscribed
shapestring letters to facebinder and convert to sketch. curves addon
Nice...
Hello Mads, I would like to combine the Sketch_on_Surface with the cylinder, either as an emboss or deboss to 3d print, but I cannot use boolean on neither Part nor PartDesign Workbench, do you have any ideas?
czcams.com/video/z7vgMzuGT2c/video.html
@@madslethdanielsen2099 thank you I will study it!
Thanks
At 6:55, there "Reverse V" is selected in the "Touchup" section. I do not have this "Touchup" in the property view panel. Would you know how to enable it? (I'm using version 18.4, and just loaded 0.19 and it is still not there). Thank you for this very helpful video!
Install the newst version 0.19
Development versions
Best regards mads 🇩🇰
@@madslethdanielsen2099 I did, and same issue exists for me.
Curves Workbench installed
OS: Ubuntu 20.04.1 LTS (ubuntu:GNOME/ubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.23074 (Git) AppImage
Build type: Release
Branch: master
Hash: 74b866ed3022fd1452c534dae31a721bcc668f2f
Python version: 3.8.6
Qt version: 5.12.5
Coin version: 4.0.0
OCC version: 7.4.0
Locale: English/United States (en_US)
May I ask which build of 0.19 you are using?
Attached example of a file I could not get to work. www.dropbox.com/s/krolnqngf13fc1o/text%20on%20cylinder.FCStd?dl=0
I posted this question in the freecad forum:
forum.freecadweb.org/viewtopic.php?f=3&t=45307&sid=b63526fd38d625e9cbc110cd57102978&start=10
I have jost trayet it Agen and it jost work i use windows 10 and 0.19 22960
Have you tryet to update the curves wb in addonmaniger
@@madslethdanielsen2099 Ok, I uninstalled the curves wb, restarted; reinstalled it and restarted, and it seems to work now. Thank you!
Cool! I wish I could get it to work. I use 0.19 and when i try to map sketch on surface in Curves WB I always get the same error message: Maximum recursion depth exeeded while calling a python object. :(
EDIT: Apparently it didn't like the font I used.
I have jost trayet it Agen and it jost work i use windows 10 and 0.19 22960
Have you tryet to update the curves wb in addonmaniger
I was able to make it work now. I tried to create a bowl like a cone with slanted walls and I guess FreeCAD didn't like that. There are probably more steps involved.
Will I get a two-color print when exported to STE?
No just select in the left side the things you want to be in the step file hold down the ctrl key while you're doing it. Then select export to stl in file menu. Best regards mads😜🇩🇰
@@madslethdanielsen2099 Thank you. As I have no printer, I must send my jobs to a vendor via email as a single file exported from FreeCAD. I now believe exporting via 3MF is the way to do this. I need to print white embossed letters inside a black material via a single importable file for my vendor. This is my difficult goal.
Whats the difference between Part and Part Design? How do you know which one to use?
Part Design is the wb you shut use.. part have som tools you can lean then you go along..
@@madslethdanielsen2099 Ok
Hello Mads, I have tried to follow this and when I use the curves workbench to attach the sketch to the face of the cup I get an error " 'Sketcher.SketchObject' object has no attribute 'getConstruction' " Do you have any suggestions? I unistalled and reinstalled the curves workbench and my build of FC is 23463 which is pretty recent. Thank you for the videos and any help. Happy New Year.
Thanks for the questions. Have you mate the blue box around the text it is 0.19 you use🙂
@@madslethdanielsen2099 Hello Mads, yes, I made the blue construction box. Several times. I have tried different fonts too. Thank you for replying.
Hi Mads, I finally got it. I am not sure what did it but I think it was the order in which I had selected the sketch versus the surface on the curves workbench. I also downloaded the latest build going from 19.23463 to19.23546 but I don't know if that was it as it was still newer than the version you used. Thank you again for the video.
Hi there. I have the same problem as Bruce Williams. Do you have any other solution to it? I tried several things but i just can't get it done. Thanks.
@@deepescape6497
install freecad 0.19 neweste. you can not make text on object mait in part wb. 1 make a object in part design wb. 2 make text in draft wb convert the text to a sketch dobbel click the sketch open it drow a blue squar box awarount 3 go to part design select the object select icon map sketch on face select the sketch cuse intersection cs. 4 go to corve wb select the face of the object wher you want the text hold the control key select the sketch. select icon map sketch on face BR.. mads
I've tried this approach and the funny thing is, when I export it to STL, the text won't go along with the conversion. It's just the cup without the text. What did I miss?
I just noticed @ 5:00 my Sketch got an x mark after clicking "convert between draft and sketches". I followed the same steps. Any thoughts?
I gave up - I'm not sure if what I did is 'best practice', but I just went to Part workbench and do a "Make a union of several shapes". That solved my dilemma. :-D
You have to select everything in combo view holding down the ctrl key and then exporter to stl🇩🇰
Hi Mads, thanks for this video! I'm making a camera filter adapter (shape is like two different size nuts stacked on top of each other), I'm using the spreadsheet to make it parameterized. I have it working such that the model resizes when I adjust the spreadsheet.AdapterSize value; I thought it might be nice if I could emboss the size of the adapter onto its side along it's outer top ring in the same manner as filters and lenses do... As the text is dynamic (it could be "49mm" or "52mm" depending on the AdapterSize value), I don't think the approach of converting a ShapeString into shapes would work would it? Was wondering if you might know of another way? If not, no biggie. The model I'm using is here (forum.freecadweb.org/download/file.php?id=157530), should you want to check it out. Cheers!