How to install a gate operator/motor

Liftmaster Gate Operator Kit-
www.liftmaster.com/24vdc-high...
Light bulbs- www.amazon.com/gp/product/B08...
0:00 Introduction
0:37 Power for gate operator
1:10 Concrete Base for gate operator
1:30 Conduit for gate operator
2:54 Mounting bolts for gate operator
3:20 Chain and Brackets for gate operator
4:11 How to install loop sensor/detector and how it works
5:36 How to install close eye sensor and how it works
6:27 How to install open eye sensor and how it works
6:55 How to install gate keypad and Knox switch/box
7:36 Lights for gate
8:10 Familiarizing with gate operator Liftmaster CSL24UL
10:23 How to wire loop sensor or gate operator
11:36 How to wire close or open eye sensors (LMRRUL) on gate operator
13:20 How to wire keypad for gate operator
16:04 How to wire lights for gate
17:02 How to wire a timer to gate operator
18:38 How to wire battery backup for gate operator
18:57 How to program/set gate operator Liftmaster CSL24UL
21:00 Using gate

[@mikelsbug817]

I struggled trying to find a video that actually showed how to hook up the wiring the electrical to these Gates. Thank you!!

[@realdealGod]

Awesome. Glad I could help

[@SuperCadillac08]

Learned alot from this video especially I need to make sure I run enough conduit before poring the cement for my gate and opener. Thank you

[@realdealGod]

Yes. Definitely make sure you run enough conduit before pouring the concrete. I would rather have conduit left over for future ideas.

[@Drkrjamon018]

Love the video dude just a bit confused, I think the polarity doesn’t matter on the white and green for the photo eyes. It does matter on the red and black since one is a negative and one a positive

[@realdealGod]

Thank you @Drkrjamon018
So in my case I used the green and white for power and the black and red wires were for signal.
I can’t remember why I did it like that but I’m pretty sure I had a reason.
That’s why polarity didn’t matter for the red and white on the eyes. But the white and green wires it did matter because those were my power.

[@MarijuanaMotivatedTV]

Nice install !

[@tb3894]

excellent video

[@realdealGod]

Thank you

[@robertbenoit5374]

Ethernet cable? What year is this? I just bought a liftmaster gate operator and it has MyQ which is wireless. I can even operate my gate from the internet. Shoot I've opened my garage door from 1500 miles away so I know myQ works.

[@carsconsruction8029]

great video
I had one question on the Knox box do you get that from your local fire department?

[@realdealGod]

You order the knox box from:
www.knoxbox.com/Products
When you are ordering it, it will ask you for information from you local fire department.

[@trulyaktive4796]

I need to connect power to the motor I don’t know where on the motor and how many wires to give it power can you help me out please 🙏

[@realdealGod]

Hey, of course. The power is connected to the metal box with the wires inside. You will need 3 wires. A black, white, and green.
Do you have the same model as the one in the video?

[@trulyaktive4796]

From the picture the client sent over it looks like the same model , the motor says “elite” but I’m sure it’s a liftmaster. One more question is it possible to connect solar panels to the battery so I won’t have to run wires from the power source ? Electricians can be a bit pricey and solar panels might be the best option for my customer

[@realdealGod]

I didn’t connect solar panels to mine but yes, you can connect solar panels to the operator.