Hey Lads! Today we will be upgrading the corsa with the double GID screen and AUX capability. Please like comment and subscribe. Thank you for watching! www.paypal.me/...
Hi there, nice video! A thing that you did not present in the video is the possibility to activate check control. This option allows the GID to show if a particular light is burnt and what is the position of it on the car. (i.e. front lights, brake light, position lights). This is nicer than the INSP message on the IPC. Keep up the good work!
If the radio/gid was not "reset" on the original car, will I be able to install and activate it on my car using my car's code? Or will I need the doner car's code for that?
good evening, do you know how programming is done, I have to take it to an electrician or to Opel, I had the small screen, I changed it, I put the big one together with the radio, and it doesn't show me the consumption at all, you know I have to do it.. thanks
Nice one mate. Funny you did this vid because I was thinking about doing this but decided to get a 7" touchscreen double din radio/satnav ( bidding on one now!) Your video has given me a clue to route the cable for the GPS to the top of the dash!
Soggy - Alan Dawson the only issue I’ve ran into in the corsa e was the steering wheel controlls (SWC) and the harness. Converting the Vauxhall’s harness to an iso harness involved a bit of butchering. I’ll probably refit it at a later date but for now it sits hiding away.
Help please.. I have the CD30 MP3 with big screen GID and small dial screen with the BC and OK buttons. My issue is my display only show two tabs, radio and phone. I want it to show radio, phone AND car (range, mpg etc). The BC (Board Computer) only shows the timer if I select return or main it just goes back to the two tabs. How can I change this? Can I simply program code index 002 with my opcom and that will bring up the third tab?
I have Corsa with big display but only Phone and Radio tabs are there ... no third tab visible. I wonder if it's possible to get consumption displayed ? Will the Op-com programming work for me as showed on the video?
Hi mate, I was woundering if you need to install the CD30 stereo with the double screen as I want the double screen but I have a pumpkin touchscreen already in the middle.
Hi. I’ve just purchased the display with the radio second hand from eBay for £40 and I’m waiting for it to arrive. I already have the AUX socket as I’ve got a 2010 Corsa D so I don’t think I’ll have any issues putting it all together. I searched for this opcom device you used and have seen many different ones online. Is it a genuine thing or do they all look the same and will buying any of them do? The ones I’ve seen are around £20 and from China mainly. Please let me know soon I hope you see this. Thanks 😊
Hi Tom, thanks for video. i have opel ciorsa D 2007/1, and in Slovakia there is only CD30 mp3 with 2 buttons -setting and sound -we don't have BC and OK button there- will it work with it? or if I buy CD30mp3 like you have- will it work in my opel? Thanks for that!
Hello, I want to upgrade my cd30mp3 with a cd30mp3 with aux and I was wandering if you can help me. Do I need to change my screen too cause the one that I have now doesn't have the option to change from fm to aux. Also does my car need to have some special wiring already on so I can use the aux? Thank you
Tom, I have an omega B and I installed a GID screen. doesnt work with my radio at all. Can I reprogram it to accept a CCRT radio ( with cancel button) or install a separate cancel button?
Can I hook up a aux cable to a corsa that didn't come with one. It's got the inputs behind the cd30 connector. Will it needs activating if I just stuck a cable in.
If I want to swap out my cd30 to a cd30mp3, do I have to do anything other than install the cd30mp3? My corsa has an aux already built in (2010 SE) but no option for aux. I haven't opened it up to check where the already installed aux female is connected to yet
IT may have different wiring for the rear speakers i realised i had that problem when i changed them round. But other than run the aux to the adapter if its not already nope
Hello, I know this is an old video but, is there anything you need to look for installing the GID or will it work in any corsa D, will just installing it and programming it activate those features? Also, does the GID and the CD30 need to be disconnected to the previous car?
You need to get the paired gid to the radio as a pair, then you know they will work proper and you wont have any issues. And yeah it should be plug and play.
Serious question: Is the GID-Display any useful? I mean, I can display BC-Informations in my instrument display on my 2014 Corsa D. I don't get whats the deal with the GID-Display?
2 years later you have probably know why, there is pins you need to have on the wires coming fron in aux jack. In the same boat just can't figure wich ones out. Do you know wich ones?
Hello Tom my car already had a gid screen but I now have a touch screen in place of the cd30 and I've bought an opcom but I don't have all the options you do when programming as I wanted to activate the mpg screen, your help would be appreciated
hi sorry to bother you i've just done the big gid display swap over its all in but my lat part the top hat housing looks diffrent on the single gid do need change the top hat for double top hat housing..thank you
@@TomsDriveway do you have the part number for the top cover? I ordered one and I realized that there are two different kinds. I got the one that needs the hazard trim to stop at the display. But I have the same as you that continue all the way around. Did you get a cover that fits that one or did you exchange the hazard cover as well?
Hello Tom and thanks for the video! I will also definitely upgrade to the double screen. Question: I see that you have this opcom (or whatever clone is it) version 120309a, can you please check if it has the Corsa model of 2011 with engine code A14XER? I want to buy also this tool but I don't know if they support the corsas of this year.
Tom, a stupid question: How are you going to adjust the time in your new screen? Because I see no buttons! Should it be always via opcom? Also, is your new screen somehow functioning with the lower button which is located on the left side of your steering wheel? Because in my case, this button is doing nothing (so i was thinking that maybe with this screen it works). Thanks and keep up the good videos!
@@nmaniacos the time adjusts off the local signal. The buttons should work, unless they arent programmed/wired in opcom. Check in the body if there are any open circuits. It will tell u if u need to add the wire once programmed.
I have the aux head unit, I've connected the 3 pins cable like you've did, but going through the source menu it skips from cd/radio/am/fm but no aux...
@@charlies916 I bought the cable for Opel and didn't change the pin configuration for the socket. Sold the car and bought a C5 2006, also blaupunkt stereo, where I had to re-arrange the pins, but for you, if you buy the opel-corsa aux-jack cable, it should come with pins pre-installed-pre-arranged. for me it worked when I switched between radio and cd, it self locked to aux. good luck
@@TomsDriveway ah okay, just got done doing the cruise control mod with my 2009 1.2 active and thought about this if I could just pull any old gid out of a car at a scrapyard, sadly not as easy as that then
Wow, im shocked the amount of people who my videos help. When i make them i fell like it doesnt help. Sadly not, although definately somethijf you can achieve.
Tom's Driveway hi Tom I've fitted new steering wheel with controls and programmed with opcom but it's not working getting fault steering wheel controls circuit 2 open ?
That means that you need to run the wire to the steering wheel plug, there is an open in the circuit meaning it isnt conmected. Mwans u programmed it prorperly
Hey, You can just plug your phone in, turn to aux input on the radio and click play. No need to program it in. But the radio need to have aux input. So CD 30 mp3
Thinking about buying a Corsa d that has only a tid screen, buy now I'm used to have a fuel range always on. Thanks for that!
Hi there, nice video! A thing that you did not present in the video is the possibility to activate check control. This option allows the GID to show if a particular light is burnt and what is the position of it on the car. (i.e. front lights, brake light, position lights). This is nicer than the INSP message on the IPC. Keep up the good work!
Thanks and have 1 nice weekend
If the radio/gid was not "reset" on the original car, will I be able to install and activate it on my car using my car's code? Or will I need the doner car's code for that?
good evening, do you know how programming is done, I have to take it to an electrician or to Opel, I had the small screen, I changed it, I put the big one together with the radio, and it doesn't show me the consumption at all, you know I have to do it.. thanks
Quick question, can you have GID screen and android sat nav installed at same time?
Nice one mate. Funny you did this vid because I was thinking about doing this but decided to get a 7" touchscreen double din radio/satnav ( bidding on one now!) Your video has given me a clue to route the cable for the GPS to the top of the dash!
Sweet im glad it helped, tbh there is plenty of space once you remove the radio and that plastic vent pieces.
My car has the CD30 MP3 In with the Aux already there but has the small screen. Can you get more info on the screen other than fuel consumption?
You can get a timer, fuel consumption, climtate control if ur car has it and trip information. So not a massive amount really.
Soggy - Alan Dawson the only issue I’ve ran into in the corsa e was the steering wheel controlls (SWC) and the harness. Converting the Vauxhall’s harness to an iso harness involved a bit of butchering. I’ll probably refit it at a later date but for now it sits hiding away.
You have to butcher a little to get anywhere.
Can this op com read security code to programme my key ?
Hi. What if I do not have the cd30 as I use a touch screen there? Will it work fine? Also can you change between menus in the gid?
Help please..
I have the CD30 MP3 with big screen GID and small dial screen with the BC and OK buttons. My issue is my display only show two tabs, radio and phone. I want it to show radio, phone AND car (range, mpg etc).
The BC (Board Computer) only shows the timer if I select return or main it just goes back to the two tabs.
How can I change this?
Can I simply program code index 002 with my opcom and that will bring up the third tab?
I have Corsa with big display but only Phone and Radio tabs are there ... no third tab visible.
I wonder if it's possible to get consumption displayed ?
Will the Op-com programming work for me as showed on the video?
How do you set the range on this
Hi mate, I was woundering if you need to install the CD30 stereo with the double screen as I want the double screen but I have a pumpkin touchscreen already in the middle.
did u ever get the answer to this, im having the same thoughts but i have the double but want a touchscreen as well
Hi. how do I go about finding the pin code for my Corsa d to pair a replacement double display screen to my existing cd 30 radio.?
Could j add jn that aux cable without the double screen with it working normally?
Mine works mostly fine ( speedo and range work) but the fuel consumption always shows 43.3MPG... doesn't change
Hola, estoy viendo de isntalar un GID en Meriva A. Se podrá?
Hi i have corsa d 2008 i found dabble screen and cd mp3 from corsa d 2012 it's possible to setup in my corsa d 2008
Anyone know where I can buy the hood for this model, can get hold of one but it don’t have the hood
Did your car not already have the aux input already installed? Mines a 2008 opel Sri and this comes as standard.
When I go to program code index i get the message " no code index found "
Hi. I’ve just purchased the display with the radio second hand from eBay for £40 and I’m waiting for it to arrive. I already have the AUX socket as I’ve got a 2010 Corsa D so I don’t think I’ll have any issues putting it all together. I searched for this opcom device you used and have seen many different ones online. Is it a genuine thing or do they all look the same and will buying any of them do? The ones I’ve seen are around £20 and from China mainly. Please let me know soon I hope you see this. Thanks 😊
Hi Tom, thanks for video. i have opel ciorsa D 2007/1, and in Slovakia there is only CD30 mp3 with 2 buttons -setting and sound -we don't have BC and OK button there- will it work with it? or if I buy CD30mp3 like you have- will it work in my opel?
Thanks for that!
Hej man ,, how i can cancel the message on the screen said slepery road ,
Hello, I want to upgrade my cd30mp3 with a cd30mp3 with aux and I was wandering if you can help me.
Do I need to change my screen too cause the one that I have now doesn't have the option to change from fm to aux.
Also does my car need to have some special wiring already on so I can use the aux?
Thank you
I need the wiring harness for the display. Do you know where I can get one?
Hi will that still work if I change my stereo
Hi Tim do you have the change the radio as well or can you just do the GID
Hey Tom, just wondering how did you get the wires from the aux to stay in place?
I taped the wire to the actual loom so that they would never move.
Tom, I have an omega B and I installed a GID screen. doesnt work with my radio at all. Can I reprogram it to accept a CCRT radio ( with cancel button) or install a separate cancel button?
Hey, where you got this cable from?
Hi Tom, I’ve got a GID like this but I have Speed/Average Mpg/ Range. Do you know how can I get the instant consumption? Thanks in advance
Thanks for inform video. Please show the all functions of gid. I'm waiting
Hi there, where did you buy the opcom? Is it a legit one or a clone?
I want to know the link of op com and software number . Thx
What did you do with the AUX cable?
Tucked it underneath the radio and out the hole next to the obd port
Can I hook up a aux cable to a corsa that didn't come with one. It's got the inputs behind the cd30 connector. Will it needs activating if I just stuck a cable in.
So the radio has to have the ability to change source. If not then it isn't possible.
I do not have aux slots at my radio. I do have corsa 2007, radio cd30, but there is no slot for it. It is not even marked at plate on top of the radio
Good job! How can I AUX install on my corsa ?
Do I need to activate it?
Can you access trip computer with steering wheel controls? Right side is for music and left side is for that.
On mine it controls the GID screen, allow you to turn the on board computer on.
Anyone know how to do this with CD40 USB from CD30 MP3?
If I want to swap out my cd30 to a cd30mp3, do I have to do anything other than install the cd30mp3?
My corsa has an aux already built in (2010 SE) but no option for aux. I haven't opened it up to check where the already installed aux female is connected to yet
IT may have different wiring for the rear speakers i realised i had that problem when i changed them round. But other than run the aux to the adapter if its not already nope
Hello, I know this is an old video but, is there anything you need to look for installing the GID or will it work in any corsa D, will just installing it and programming it activate those features? Also, does the GID and the CD30 need to be disconnected to the previous car?
You need to get the paired gid to the radio as a pair, then you know they will work proper and you wont have any issues. And yeah it should be plug and play.
Serious question: Is the GID-Display any useful? I mean, I can display BC-Informations in my instrument display on my 2014 Corsa D. I don't get whats the deal with the GID-Display?
I like it really but I guess if you arent interested in the fuel consumption on the gid screen then no.
Hello Can I ask for the part code of the GID screen?
where did you buy this?link please
Ebay, so you will have to search yourself
If the screen and the radio are already paired, do you still need to use opcom?
yes you have to enable board computer on bcm and infotainment menu
How do you connect the aux wires to the plug?
You basically crimp on connector pins. I may show it in a video for you as ive installed the center speaker but didnt record it.
@@TomsDriveway OK thanks. This is the best video I could find dealing with this. Well done!
Hi tom, how did you manage to get the aux wire in the harness without it falling out?
2 years later you have probably know why, there is pins you need to have on the wires coming fron in aux jack. In the same boat just can't figure wich ones out. Do you know wich ones?
Nice one
How do you unpair?
Does this double screen display song information when playing through AUX, or will it simply say AUX? Thanks
It simply says aux unfortunately
Was the replacement screen already divorced from previous car?
No it was linked to the radio so it was just a straight replacement
Hello Tom my car already had a gid screen but I now have a touch screen in place of the cd30 and I've bought an opcom but I don't have all the options you do when programming as I wanted to activate the mpg screen, your help would be appreciated
Yeah so I think you should be able to get the information by changing the code index like I did in the video. Just experiment really.
@@TomsDriveway yeah that's what I mean, code index doesn't pop up just 4 different options?
Strange, I managed to get as far as the programming but 02 02 didn't do anything for me, tried the others as well 😔
Hmm strange I don't really know what to suggest as you have tried others.
Do you have to strip aux cable to put in the stereo
Yeah to put pin on it
Can you post wiring diagram please
hi sorry to bother you i've just done the big gid display swap over its all in but my lat part the top hat housing looks diffrent on the single gid do need change the top hat for double top hat housing..thank you
Yeah the single screen and gid uses a different housing.
thanks tom your very helpfull
@@TomsDriveway do you have the part number for the top cover? I ordered one and I realized that there are two different kinds. I got the one that needs the hazard trim to stop at the display. But I have the same as you that continue all the way around. Did you get a cover that fits that one or did you exchange the hazard cover as well?
I've got a gid screen but it only has radio and the phone bit (so 2 tabs at the top) can it be programmed for the fuel mpg etc
Yeah it should be able to!
@@TomsDriveway thanks for the reply
Hi Tom, can you tell me if the radio and screen were unmaried from the car that you bought or did you have to program them on your Corsa ?
They were both married together as a pair luckily. So didnt have to mess around with that.
@@TomsDriveway So they were just plug and play?
@@d.s.9011 they were indeed! One of my easiest upgrades to the car. Minus changing the coding index to display fuel consumption.
Hi, to programme the screen to have the fuel consumption in op com, do you need to have the car pass codes for the engine or not?
You do indeed need the security code on the Vauxhall car pass. I had to bite the bullet myself and buy it!
Tom's Driveway okay thank you
Hello Tom and thanks for the video! I will also definitely upgrade to the double screen. Question: I see that you have this opcom (or whatever clone is it) version 120309a, can you please check if it has the Corsa model of 2011 with engine code A14XER? I want to buy also this tool but I don't know if they support the corsas of this year.
I will have a look and let you know tomorrow!
Tom, a stupid question: How are you going to adjust the time in your new screen? Because I see no buttons! Should it be always via opcom? Also, is your new screen somehow functioning with the lower button which is located on the left side of your steering wheel? Because in my case, this button is doing nothing (so i was thinking that maybe with this screen it works). Thanks and keep up the good videos!
@@nmaniacos the time adjusts off the local signal. The buttons should work, unless they arent programmed/wired in opcom. Check in the body if there are any open circuits. It will tell u if u need to add the wire once programmed.
Yeah it supports that engine code.
@@TomsDriveway Thanks Tom! I am going to order it.
Hey Tom, what about just only adding the aux cable to the radio? Do you know how can I have the aux menu function?
You have to have the aux function in the radio, ie cd 30 mph. Then its literally three wires into the back of the head unit connector.
I have the aux head unit, I've connected the 3 pins cable like you've did, but going through the source menu it skips from cd/radio/am/fm but no aux...
finally working, I had to plug and unplug a couple of times and on/off radio also.
@TomsDriveway @flashmasstock by any chance do you remember wich pins you used?
@@charlies916 I bought the cable for Opel and didn't change the pin configuration for the socket. Sold the car and bought a C5 2006, also blaupunkt stereo, where I had to re-arrange the pins, but for you, if you buy the opel-corsa aux-jack cable, it should come with pins pre-installed-pre-arranged. for me it worked when I switched between radio and cd, it self locked to aux. good luck
Hello, i have same small display in my 2010 Corsa as you had. All i need to do is change display for bigger one and program it?
Yeha however u will need to change the radio to the one with the big screen. Unless its unparied
Was this a divorced gid or does the opcom let you just marry it to a new cd30 without worrying about divorcing it first?
The gid was still linked, however you can divorce using opcom. I remember seeing the feature. Otherwise they just dont work properly
@@TomsDriveway ah okay, just got done doing the cruise control mod with my 2009 1.2 active and thought about this if I could just pull any old gid out of a car at a scrapyard, sadly not as easy as that then
Wow, im shocked the amount of people who my videos help. When i make them i fell like it doesnt help.
Sadly not, although definately somethijf you can achieve.
Hello tom how do you divorce the new gid screen using op com? I've tried and can't find it no where. I just keep getting screen safe. Thanks
What version of op com do you have because I’ve got a 61 plate corsa d 1.2 with the A12xer engine
V1.64 is the version of opcom, vauxcom.
Tom's Driveway does that have 2011 corsa d engine A12XER on?
I think so, im gonna do a video soon on my opcom as it seems to be interesting to people.
Yes that would be helpful!
Hi tom
Question:can i install Double GID screen with EONON unit installed instead of CD30?
I think so yeah, you may need to messing around with opcom to allow it but im pretty sure it wil worl
Tom's Driveway hi Tom I've fitted new steering wheel with controls and programmed with opcom but it's not working getting fault steering wheel controls circuit 2 open ?
That means that you need to run the wire to the steering wheel plug, there is an open in the circuit meaning it isnt conmected. Mwans u programmed it prorperly
Tom's Driveway can you guide me how to run the wire from where to where please? thanks
I cant quiet remember the pin layout off hand, i know you can find them online somewhere
If i put the aux in my radio like u have done, would it play easly or did I need to set It up with the Pc?
Hey, You can just plug your phone in, turn to aux input on the radio and click play. No need to program it in. But the radio need to have aux input. So CD 30 mp3
My radio is that One but its 2007 Opel Corsa d, work It the same?
Thx to answer 🙂
I've got an aftermarket stereo, if i buy the GID can i still use it for MPG etc ?
Yeah im pretty sure you can so long as you activate it .
No, the radio does the magic.
Feels like of hassle for noting why didn't u jest buy a fm transmitter
Because then no-one would have a video. Plus i enjoyed doing it.
@@TomsDriveway sorry man if my comment offend u was not my intention I was only suggesting
Its all good, dont worry about it. I just make them for fun and to be helpful that all. Or hopefully helpful haha
Because FM transmitter's are shit