Understanding the Stiffness Modifiers | IS1893(Part 1):2016 & IS16700:2017 | ilustraca | Sandip Deb
Vložit
- čas přidán 13. 09. 2023
- Understanding the Stiffness Modifiers | IS1893(Part 1):2016 & IS16700:2017
𝗪𝗵𝗮𝘁 𝗰𝗮𝗻 𝘆𝗼𝘂 𝗹𝗲𝗮𝗿𝗻 𝗳𝗿𝗼𝗺 𝘂𝘀 ?
📌 RCC Building Design using ETABS and Manual Design (IS456:2000 & IS13920:2016)
📌RCC Building Design using STAAD. Pro and Manual Design (IS456:2000 & IS13920:2016)
📌RCC Design and detailing using RCDC and Manual Check (IS456:2000 & IS13920:2016)
📌Civil Site Engineering & Interview Preparation
𝐃𝐨𝐰𝐧𝐥𝐨𝐚𝐝 𝐨𝐮𝐫 𝐌𝐨𝐛𝐢𝐥𝐞 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐭𝐨 𝐞𝐧𝐫𝐨𝐥𝐥 𝐭𝐨 𝐭𝐡𝐞 𝐜𝐨𝐮𝐫𝐬𝐞-
𝐀𝐧𝐝𝐫𝐨𝐢𝐝 𝐀𝐩𝐩- lnkd.in/d_Rau-sk
𝗜𝗹𝘂𝘀𝘁𝗿𝗮𝗰𝗮 𝗔𝗰𝗮𝗱𝗲𝗺𝘆 is now available for IOS users also !!
Follow the 2 simple steps-
1. Download 𝗠𝘆𝗜𝗻𝘀𝘁𝗶𝘁𝘂𝘁𝗲 App from App Store.
App link- lnkd.in/dxS74bQk
2. Open the app and log in with Org. Code- "𝗔𝗠𝗜𝗧𝗖𝗢"
Join this channel to get access to perks:
/ @ilustraca
𝗪𝗵𝗮𝘁 𝗰𝗮𝗻 𝘆𝗼𝘂 𝗹𝗲𝗮𝗿𝗻 𝗳𝗿𝗼𝗺 𝘂𝘀 ?
📌 RCC Building Design using ETABS and Manual Design (IS456:2000 & IS13920:2016)
📌RCC Building Design using STAAD. Pro and Manual Design (IS456:2000 & IS13920:2016)
📌RCC Design and detailing using RCDC and Manual Check (IS456:2000 & IS13920:2016)
📌Civil Site Engineering & Interview Preparation
𝐃𝐨𝐰𝐧𝐥𝐨𝐚𝐝 𝐨𝐮𝐫 𝐌𝐨𝐛𝐢𝐥𝐞 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐭𝐨 𝐞𝐧𝐫𝐨𝐥𝐥 𝐭𝐨 𝐭𝐡𝐞 𝐜𝐨𝐮𝐫𝐬𝐞-
𝐀𝐧𝐝𝐫𝐨𝐢𝐝 𝐀𝐩𝐩- lnkd.in/d_Rau-sk
𝗜𝗹𝘂𝘀𝘁𝗿𝗮𝗰𝗮 𝗔𝗰𝗮𝗱𝗲𝗺𝘆 is now available for IOS users also !!
Follow the 2 simple steps-
1. Download 𝗠𝘆𝗜𝗻𝘀𝘁𝗶𝘁𝘂𝘁𝗲 App from App Store.
App link- lnkd.in/dxS74bQk
2. Open the app and log in with Org. Code- "𝗔𝗠𝗜𝗧𝗖𝗢"
Show how to apply snow load for hilly areas having wooden + Gi sheet roof truss
Also show how to apply wind load for that roof which can't be shown(roof) also what will be the load of that truss which can't be shown
From Kashmir..... So situation occurs like this
Excellent teaching 👏...now i got it thanks you sir
Very well explained Sandip
It would be better if you put the conclusions that you arrived at the end of discussion in the WRITTEN FORM in the same way you wrote the comments in red colour during the discussions
Sir then How we can apply both SLS and ULS modifier in Single Modal Analysis?
There are many debates and discussions that happened about the use of modification factors while designing the structure. There are two schools of thought. Many people recommend using them for analysis only. For design, no modification factor should be used according to them. Which one is correct is still a mystry !!!!
Watch the lecture.. Mystry is solved with logic
Already gone through it, and it is really very helpful and makes the concept clear. But as I have attended many offline lectures of persons who are in a good position in industry and also involved in the codal amendments, they are taking the word "For analysis" of the clause seriously. Also, I share my own experience about a high-rise building, and when design is done with modified I, some columns fall under the sway column category, which shows impractical r/f demands. While in other case, those columns fall under non sway column category and show very less r/f than first case...
Good explanation..... I have a doubt why you are considering SLS for wind?
What's the logic?
@@nikkiboy30 After this explanation also if u need to know that, extremely sorry, I'm unable to make u understand that futher
what is the essence of stiffness modifier? what is the rationale for it? is it stiffness reduction for members during analysis to attract less forces? in my Kenyan undergrad engineering class, this topic was not taught at all, I have researched on it but it still eludes me. In my personal studies, I have leant stiffness attracts forces. A stiffer member will have more moments and so on. Does stiffness modifier means the structure is made more flexible during loading action? Does it mean the building will attract less lateral forces since stiffness of members are reduced? Is that not dangerous since the structure is very flexible under stiffness modifier application? A flexible member will not be good under earth quake especially the R.C walls. Is stiffness modifier applicable in analysis or in design? if it is about cracked section, doesn't it mean it is applied in design only but not in analysis.
Sir, If wind load is governing the design then which model shall we consider for design? ULS model or SLS model ?
Design should be performed in the model with stiffness modifiers for Ultimate loads (ULS Model)
@@ilustraca thanks 👍
23:00
I am thinking of taking civil engineering but all saying this this and that then CSE CSE CSE ... please tell me on opportunity, struggle, efforts 😢😢😢😢
Please 🥺
Struggle is real in this field... go for CSE/IT
@@ilustraca sure... 🥺
@@ilustraca I want to be known as someone important not just a employee 🫤😭😭
My mind is so disturbed 😭
@@ilustraca I want to be known as someone important not just a employee 🫤😭😭
My mind is so disturbed 😭
@@ilustraca is the struggle on finding job or after getting the job??
I don't have any CSE or civil engineer in contact... became frustrated listening to random dudes, people with other engineering like textiles, coaching teachers etc...my teacher suggested me to go for Civil but all others are against it 🥺
Please 🥺🥺