Is this 4WD Brushless Banggood Special RC Car any good? We will see!!! Feiyue FY03H
VloĆŸit
- Äas pĆidĂĄn 10. 12. 2018
- Get it here: www.banggood.com/Feiyue-FY03H...
đFree eBay help from Kev - kevtalbot.com/ebay42/
đKev's RC Basher School - kevin-talbot.teachable.com/p/...
30 day No Questions asked money back Guarantee (if you have completed under 40% of the course)
Follow me on instagram / talbotkev
Like and follow my Facebook page see videos earlier! / kevintalbotvideos
Check out my Business Channel: Kevin Talbot BIZ / @kevtalbot5356
Videos Uploaded most days, Subscribe so you don't miss them :)
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, destruction and a bit of business stuff :)
#kevintalbot #rccars #rc
Subscribe!
You need to get the redcat be6s RC
Landen Andres looks like a pretty cool car man
Instablaster...
Can you link a LiPo compatible for this car please
I love all of your videos and hope you never stop!
You should have steve make a video on how to calabrate an esc
I will! :)
Thanks
I donât understand how to do that, please help me!!!
Hey, can you make a tutorial on how to calibrate esc on this feiyue? Thx!
I think you just hold the throttle full while plugging in the buggy. Wait for a couple beeps and let go of the throttle. Bob's your uncle.
I have the original version and it has lasted great for a couple years now. Real metal differentials are wayyy better than the WLtoys competition. Iâd love to get one of these and try it out. I love my old FY-03! Insanely tough and cheap.
wow that looks great, the controller is super for L & R great vide and thank you for sharing kevin
CONGRATS FOR 200K SUBS KEV
Am Happy your doing affordable Rc trucks Kev and giving them a good Test, fantastic review and and Fantastic video bro đ
Hi kev! I love your vids and your my favorite youtuber, keep up the good work!
Hi Kevin i been watching your videos their pretty damn good!! These videos put me in a better mood :)
Hey Key!!! I haven't seen a vid for a while, it's great to be back!!! Once again another banger vid!!!
thanks bro
Lol I paid a few days ago about 55 pounds for a quite toyish RC and while you can get this level of RC for so cheap... Keep up the good work Kev and have a Happy New Year :)
Hi there. Thank you for this video. One question: how do you calibrate the ESC that comes with this car???
Thank you
That thing looks insane!
1:00 "He's in"!
That's what she said.
put 2 round neoprene/rubber servo grommets on a small screwdriver shaft, carefully slice out smaller center tube section with a hobby knife, you have your 4 oil seals for the shocks.
mount flat side up, tighten threaded lower cups that hold them in just decently finger snug. 30wt in rears, about 80wt for the fronts (shorter with heavier springs), it won't bounce after.
They better not let traxxas see those front shocks lol
It's a twin hammers copy, shouldn't be anything traxxas plus traxxas didn't invent cantalivers
Twinhammers is 10th not 12th the 10428 is almost a direct copy of the twin hammers.
@@scottroberts7496 how does the scale make a difference pretty sure the 10428 and the 12428 are the exact same besides scale and minor things
@@DavidGamero I guess I was just basing it off scale only.
David Gamero I know but traxxas sued arrma because the Nero used a similar shock setup as the revo . I lost some respect for them after that especially because tamiya was using cantilever suspension in the 80âs
You forget checking the two speed control on the remote!
Im a great fan from Argentina!
I really enjoy your videos keep it up bro and good luck with your dreams. I have A question if you don't mind to advice me. What program do you you to edit your Videos before you upload them on youtube? Hope to hear from you soon?
Ok out of the box, those tires are so aggressive. Nice review kev! Keep it up!
@Kevin Talbot the only issue i see with this for US buyers is it only seems to come with a EU style plug, so we would need a adapter i am guessing? Thanks for the reviews I am getting back in to RC and i figure start off budget so these vids are helping a lot
Kevin, do you happen to have the part number for the 2S LiPo battery you used? Would you recommend running it in the WL12428. Just got my WL because of wathcing you channel and love it, thank you. But of course looking to get more batteries and figure going 2S LiPo would be the best bet. Enjoining the vids keep em coming new to the RC hobby
Hey Kev love your videos. I recently got that little monster , about 3 days now and i think i have some issues with the transmission. It has some serious delay in throttle and reverse . What's your opinion and advice đ
Cool video kev!!
Great video guys đ€
Thank you for the review fine sir.
you can fill the shocks with oil but need plumbers tape and some little orings in a few places. it does help the car perform
Loving the videos boss have you anything planned for Christmas bash
What a beauty! Mine is on the way in red too, and should arrive soon!
@Mr Dosh I got it yesterday! Its a beauty! No harm at roll overs! The metal shell parts are protected by all 5 wheels and the light frame on top of the shell!
Great video Keith.
What's the 'optimum' battery to purchase with this vehicle for max power and runtime? Forgive me for being a 'noob'.
Oh, and are there any other 'essential' purchases that I should consider at time of purchase? Banggood appear to be best priced.
Thanks,
Norm.
Plz do more expensive rc vids kev... I enjoy those a lot
Any day is a good day when kev uploads another video!
Hello Friend! I own FY04 and FY06đ (in addition to E-revo, Revo, Revo Platinum, X-maxx, Slash Platinum, Spartan, Trx-4, Cen Gst 7.7, Hpi Baja, Rc4wd 1/18, Tamiya Tundra and various others), and I must say that the small Chinese, in the garden have their own reason. đđđ
Why would anyone dislike an awesome video on an rc car
Both of those are pretty damn cool that green one seems like you can beat the hell out of that thingđđđđđ
Hi Kevin thinking of getting one of these Feiyue FY03H! Are the brushed and brushless the same apart from the motor and esc? Because they also do a brushless motor and esc upgrade for it and was thinking of getting the cheaper brushed and converting it to brushless with the upgrade kit! Thanks
Be interesting to see how long the alloy body panels last when bashing.
Power on 2s lipo is pretty impressive! đđ
I want one of these! I'm planning on putting a 550 size crawler motor in and some 2.2 Mudslingers!
Donât mine broke on the first day
@@gormtech2356 I didn't, thankfully
@@moistavocado2350 if you do want to do any major upgrades, the metal diffs are a must have
It's kind of alarming when Steve talks normal
haha yes!
you should put like crawler servos and stuff in that to make it slower and then go crawling with it
I love RC cars
OK I have to ask ... are all these similar looking RC parts interchangeable with the WLToys ?they all look identical just different colors ?
Good video kev 7th liked keep up the good work
Does the FY03H have schocks that can be filled with oil? Which programming card could be used for the ESC? Thanks in advance! :-)
Got 2 of theses for Xmas kids first cars.mate as one and it's taking a good bashin.
Thatâs sick
Kev just an idea for the HPI savage you can buy little supercharges for those nitro engine and it would be a cool video? Just putting it out there đđ€
Kev, do you use threaded pins in the RPM Xmaxx suspension arm? And you forgot to put the link to the crawler in the description
is the FY03H desert eagle brushed waterproof or water-resistant and can you get upgraded
Steve you know how the hbx transt 8s steve done a conversion to bruszless can yo do somethin like that without changing the esc on it pls answer ???
It might possibly crawl better in the Slow Mode?
I bought an hpi e firestorm flux and it came with a trackstar 5.5 t motor for $80 what is your opinion?
I always enjoy seeing new stuff like that. You might be able to stop the one front tire from lifting up on take off if you put thicker fluid and stiffer shock spring on that corner
the spring collars are threaded, can spin it down for more pre-load.
Nice video kev đ not a bad rig đ
Thanks found the car im gonna get me an my two sons to get into something we can do together
I have received the red one! inside the diffs is red grease! Is the grease inside the silver ones silver?
Here in california those desert buggys are call "Ultra Four's" they race in the hardest 24 hours offroad race in the world called King of the Hammers here in Johnson valley california they are built for extreme rock crawling and high speed 100mph + on open desert.
I just tried telling that to someone who claimed all these brands are copying the vaterra twin hammers. They don't understand that twin hammers is the name of a race and vaterra copied those vehicles used in that race they didn't invent this style of rig. Just like I always have to tell people that traxxas took the portal idea.feom real life 1/1 crawlers lol Traxxas didn't invent portals.
Kevin I saw a video on the Smax where they submerged the truck in a fish tank and ran it. Crazy!! I checked out some videos and it didn't look bad at all. Looks fast and durable. So I ordered one. Received it today. Great looking machine. Fast too for it's size. Check it out sometime đđ
It actually has metal shafts and stuff too and I've heard you can go brushless with them lol, I want the kit version just to mess around with.
@@stpbasss3773 I wish I knew that lol. Now I need to order another đ Thanks! đ
I love these cheap car reviews!
Don't we all
I've always wanted to know the reliability of these cheap trucks and the performance. This is the best way I know without wasting money.
this brand makes a brushed version of this truck and also have 6*6 version and other models
The esc is actually calibrated, it's just the controller have a limit, there's a key included in the box. What you just did is you just limited your throttle resolution.
Fair enough, subcribed!
Steve is back!
I love you guys .
Great vid
Pls, What's the difference between brushed and brushless rc cars?
Rig looks cool controller is cool to different
I like feiyue eagle 3 because is really good
I wonder if you can use a 30A electric RC speed controller to run a RC car
They are nifty little things for the money. The motor is a little puny for slow crawling but it does everything else well and sounds cool.
Outrunners traditionally have more torque but seeing as this one is the size of a 280 brushed motor it's a miracle it works as well as it does! A brushed 280 in this truck would literally burn out in seconds. I had the same motor in my FY06, I switched to a 540 eventually for the better low down torque but the little outrunner is doing a great job in a 2WD buggy now!
Chinese stuff is getting really good. I could just hear people's teeth gritting when you called it hobby grade but that's exactly what it is. It's more capable, better specced and designed in many ways than an entry level Tamiya or Kyosho.
what is the battery that you put in there please mate? thankyou
Just got mine today (after ParcelForce held it, charged import duty and then an extra amount to deliver it!!!! Do not order from BG USA!!) What's the process for calibrating the esc please?
Steve is the man
Hey Kev, do you have a link where I could find those purple hex drivers?
Can you do a video of filing the shocks with oil for the WLtoys
Dam I want that u have an awesome job
I have the eachine eat04 showing up tomorrow
You mentioned calibrating thr esc for more power....how do I go about this does anyone know
There was a "SPIRIT" on camera at 1:30. Right after the car drops a light Orb flys across the bottom of the screen.
Ive got that body shell on my ftx outback
Do you have a 10th scale outback? I have a barrage 12th scale and I know they are similar I was just wondering if the 10th scale is actually 10th scale. I had a trx4 and a scx10ii and I sold them both when I got my barrage gen2 I love it that much lol.
Kev do you think should get a cheetah jlb
hey dude, how about the size comparison between this FY03H 1/12 with some RC 1/10 scale?? could you make a video for that??
Would you be able to do a review on a FTX Mauler please because Iâm thinking of getting one â€ïž
Do you think a Traxxas rustler is better for starting off in the hobby or should I go for something like this
Traxxas is great for parts quickly if/when you break stuff (in US especially), but as hobby companies go they're known to be "legal bullies" A LOT, when they used to be the biggest copycat manufacturer on the darn planet, so I have mixed feelings about them. will definitely say their products ARE pretty good tho.
Looks BETTER than the 12428
Kev
I really love your videos but I think it would be great if you used some of your more expensive rc like the xmaxx erevo udr and notorious instead of all these bang good cheap rc, just my opinion
I had a lot of expensive ones out on a new skatepark today, loads of carnage! videos soon!
Alittle update, i actually have the gizmovine 1/12 desert eagle in green fy07 and although it basically has all the same parts, its way different, PS: Take off the rear spare tire for better cornering and with that less weigh you can control it âdriftingâ way better
How to calibrate the throttle range? Tried, but failed! It isnt in the manual! Thanks!
What do you call the model of the radio-controlled machine?
Idk kev this might be close to the slash 4x4 but get a stampede 4x4 vxl I would like to see one on the channel
can you review the h-king desert fox?
there are parts available
he's brushless and 4wd
and you can put 3s in it
you can get it on hobbyking
hi kevin i have a 3.0 car from losi ten scte i am converting it to electric but i could not find a motor mount if i found it does not send it to turkey can you help me
Hey buddy, what's the size of the battery compartment for this car?
would you recommend running 3s lipo on this ?
Kevin can you do some videos on other cars besides these, small cheap crawlers.
How do your calibrate the esc?
Hey Kevin,can you review/test the Redcat Racing Dukono-Pro?
Im still waiting for a Kyosho Outlaw Rampage reviewđ€ its a really special kind of a chassis
Hey Kev this is totally random but I have an X Maxx with a few issues with motor ESC and temperature gauge can you please send me some advice please is the X Maxx 8's version original parts by the way happy holidays great video
Should I get this or the a959
Check out that articulation on the cover