This was my first Gan so I was a little frightened to do anything to the tensioning and such but I totally understand now, thank you! I also apparently overlooked the fact that I could change the corner magnets so that was good to know.
The 3 position switches on the corner pieces adjust how far out, or close, the triangle or hexagon internal magnets sit in relation to the core magnets. So essentially you have 6 settings for your turning magnet strength, how hard and sharp it snaps into position when completing a turn.
I tried the full range of limit and tension settings from the tightest to the loosest. It's still super stable at the loosest setting and not very squishy at all, though there will be an occasional floppy snap, which I decided I didn't need. The other end of the spectrum is also excellent. Despite the graph in the documentation, corner cutting doesn't get significantly reduced until a limit setting of one (at least for my tastes). Again it's super stable at the loosest setting, but it made perfect sense to go with the tightest limit setting that was comfortable on the corner cutting; and for me that was 2, though 3 is great too. From there, I adjusted tension to taste (second click/step three [however you prefer to count]). What a great cube.
Just what I wanted, the smallest commercially available flathead screwdriver! Thanks for the guide, SCS. I won this cube as my first GAN Cube besides the 354 v1 with no nuts (I wont the 11m Pro from a Cubicle giveaway XD)! But this is amazing, thank you and best wishes!)
My GAN 11 M Pro is coming for Christmas and i never owned a GAN cube before. Thanks for the video. It isn't that overwhelming anymore. Keep in mind, i said "that overwhelming anymore".
Really INFORMATIVE VIDEO; it was very helpful. I look forward to adjusting my coming GAN 11M PRO using the acquired knowledge from this video. Ans, I have on question. Is the DARK BLUE nut for a tighter tension or looser?
The Floral blue has 2 settings. 1 and 3 Setting 1- Tightest very stable Setting 3-Loose. Kinda unstable Dark blue also has 2 settings 2 and 4 2-Looser than 1 but tighter than 3 and 4 4- Loosest setting. Very unstable,could pop and will corner twit easily.
The GAN 11 M Pro has 144 customization settings, not 168. The GES nuts have 6 positions, turning the nut a 7th time resets it back to the original position.
@@jacksoncuber8626 ok. The black internals might look better but the primary internals are better for speed solving. It reacts better to lube, gives a smoother feel and overall leads to less lockup’s and fluid solves. That’s why I think that. Saying because I have an 11m black,primary and an xs. Hope I help.
I don't understand how the center blue nut is supposed to adjust corner cutting as the only thing it seems to do is adjust the anchor point of the clear spring loaded nut. So it's just added or removing preload from the clear nut. In other words- adjusting which blue center nut you use, which setting its on, or which setting the clear spring loaded nut is on, are all doing the same thing- adjusting the tightness of the center piece.
0:14 "168 customization possibilities". Apologies, but I'm cursed with a computer science degree--and therefor obsessed with the correct counting of things. Correct me if I get any of this wrong, because I'm not perfect and get hung up on things that aren't relevant. But assuming that you want a symmetrical setup, there are 3 corner magnet settings, 3 core-magnet settings (including removing the magnets that interacts with the core), 4 center-travel (center-spring) limit settings (combined across the two different nuts), and 7 spring tension settings. Funny that the product documentation says there's only 6 spring tension settings. I had to pop a cover to count it correctly myself. What you do is go around until it pops. That's one, not zero. It's a classic off-by-one error. We computer science people are so silly. Anyway, allowing for 3 core magnet settings: 3 * 3 * 4 * 7 = 252.
Idk why but my reply got deleted I said that SCS has 15$ shipping for Asia as well. And if u spend a certain amount u can get free expedited shipping. The current rate for free expedited shipping is to spend 14.5k inr.
@@sarikasawhney2278 yeah like everyone has 14.5 thousand rupees right in their pockets. My 6 month school fee itself is around 12k🙄😏 I can buy a brand new cycle with 14k I think you are quite rich Aap log kabhi middle class cuber ka dard nahi samjhoge Kisi ek jamane mein hame bhangar brand cube se cubing karni padti thi! And for your 15 dollar question, we have to face 15000 questions for so much money. some common lines from our mahan parampujya matashri and pitaji: Website safe hain kya? Scam to nahi? Apan paas wale dukan mein bhi milte hain.Kyu paise waste kar raha hai? Beta, padhai kar. Ye bohot mehenga hai.(Even though I get about 100% in every exam!) Kitne cubes hai re tere paas, aur kya chahiye! (Only 6 cubes hain!) Ye itna mehenga liquid kyu le raha hain? (lube) paani use kar na! In middle class families, and even 15rupees is " *too much* " for a child (Child aging from 0-16 years!) to give! He/she might lose it, or worse, overspend it! Sirf sabji/samaan lane ke liye paise milenge! Mujhe hi pata hain, mein cubes kaise liye hain! Jaane do, Gan user kya jane YLM wale ka dard!!
The magnet adjustment doesn't change the corner magnets under the plastic it only moves the corner stock magnets closer and Farther from the core magnets.
The corner mechanism: Does it control the center-corner magnets or the corner-edge magnets? Saw some reviewers saying the one and some the other and I'm confused 🥴
It moves rhe the corner core magents it moves the magents in the corners it will change the distance from the corner from the core magnets hope this helped
Watch Shawn from Speed Cube Review. In His Gan 11 video you can see the corner stock magnet move in and out of the corner piece when he moved the corner adjustment. Time Stamp: (4 : 10)
Hey Cameron, i was just wondering what lubes do you put in the 11 M Pro when you pay for the pro setup option? I bought one with that option and was just wanting to know what lubes to buy for it when i need it
Geary video, really helpful :) Just a question though, are you sure that the triangular magnets are weaker? I tried them in my 11 M Pro and they seem stronger to be honest.
Hey Speed Cube Shop, I have been trying to find a good setup for the Gan 356 air m, and I was wondering what SCS Lube you would recommend for that particular cube, if you have a suggestion please let know , that would definitely help me a lot 👍🏻👍🏻
When you're removing the numerical distancing nut, is it possible for the tension to get messed up? I turned mine from the default to 4 and it keeps popping. Please help
what about the extra set of magnets? not the triangle or hexagon ones, but some really tiny magnets that came in a plastic bag? do you replace them with the core ones or put them on top of the core ones?
On my 11 pro wich nuts will make it tighter. I'm on dark blue and it's to loose. I am a hard snappy turner. If the dark blues are the tightest I guess I will Dig and gav the lube it
I've never solved a cube before and I got this since it was recommended from my friend who's into solving cubes but it seems like it's kind of expensive for cubes from me reading the comments and not a lot of people have it, now I feel like I'm wasting a cube
![GAN 11 M PRO // IS THIS THE BEST SPEED CUBE ON THE MARKET? [GIVEAWAY]](http://i.ytimg.com/vi/S19LvZGFZa0/mqdefault.jpg)
![GAN 11 M PRO // IS THIS THE BEST SPEED CUBE ON THE MARKET? [GIVEAWAY]](/img/tr.png)
Great video, now all I need is a gan 11 m pro
Same man...
Same...
Ya same
Lmaoo
yeah same
The gan 11 m pro looks awesome with black internals
Agreed.
Yes
@Rafael Mendez nice
Mine is black internal too.
Mine is black internal to
One cube, four versions, insane customizability, great performance .... what could you ask for better than that.
Great price.....
Should've added except for that
Now 5 version, coz they added the sticker
less catching lol
gan 13
This was my first Gan so I was a little frightened to do anything to the tensioning and such but I totally understand now, thank you! I also apparently overlooked the fact that I could change the corner magnets so that was good to know.
hhhm funny this is also my first gan
Same too!
The 3 position switches on the corner pieces adjust how far out, or close, the triangle or hexagon internal magnets sit in relation to the core magnets. So essentially you have 6 settings for your turning magnet strength, how hard and sharp it snaps into position when completing a turn.
I can’t even pop out the Center without me thinking that my Gan 11 M pro is gonna break
Exactly I just opened mine today!
Same
@@thorbenmaas7848 same
I went to order it but when i used the discount code and payed i remembered i am broke
Me too
I tried the full range of limit and tension settings from the tightest to the loosest. It's still super stable at the loosest setting and not very squishy at all, though there will be an occasional floppy snap, which I decided I didn't need. The other end of the spectrum is also excellent. Despite the graph in the documentation, corner cutting doesn't get significantly reduced until a limit setting of one (at least for my tastes). Again it's super stable at the loosest setting, but it made perfect sense to go with the tightest limit setting that was comfortable on the corner cutting; and for me that was 2, though 3 is great too. From there, I adjusted tension to taste (second click/step three [however you prefer to count]). What a great cube.
Just what I wanted, the smallest commercially available flathead screwdriver! Thanks for the guide, SCS. I won this cube as my first GAN Cube besides the 354 v1 with no nuts (I wont the 11m Pro from a Cubicle giveaway XD)! But this is amazing, thank you and best wishes!)
My v1 was so bad the nut unscrewed itself
I’ve had this cube for over a year now and only just learned how to properly customise it so thanks a lot!
Nice! My GAN 11 M Pro (From SpeedCubeShop of course) will arive tomorrow, Can't wait to start customizing it!
SCS said that my uv coated version will be delayed
3:58 isn't it 2 and 4 on the dark blue
Yes
Ahahahah
My GAN 11 M Pro is coming for Christmas and i never owned a GAN cube before. Thanks for the video. It isn't that overwhelming anymore. Keep in mind, i said "that overwhelming anymore".
Where did the UV coated gan 11 m pro gone? I was planning to save up and buy it. Pls put it back.
gan stopped selling the us coated
uv*
I was messing with it and turned the tension nut clockwise and it popped and a piece came out put it back in just fine but did I mess anything up?
My cube has 2 customization. Lubed and unlubed :b
If it has screws, it's practically infinite
@@StaticNebula26 obviously you don’t know, what infinity is
@@lennygeee the planck length limits it to countable, so its practically infinite
yes
@@StaticNebula26 yes i noticed it
Nice! I needed this
I ordered mine yesterday this information goona be really helpful thanks!
This is why tingman ranked your thumbnails as the best
you make popping out the center cap look easy
Thank you for this video this is my first customizable cube and this video made it less depressing
Really INFORMATIVE VIDEO; it was very helpful. I look forward to adjusting my coming GAN 11M PRO using the acquired knowledge from this video.
Ans, I have on question.
Is the DARK BLUE nut for a tighter tension or looser?
The dark blue nut has settings number 2 and 4, so basically yes, it is.
The Floral blue has 2 settings.
1 and 3
Setting 1- Tightest very stable
Setting 3-Loose. Kinda unstable
Dark blue also has 2 settings
2 and 4
2-Looser than 1 but tighter than 3 and 4
4- Loosest setting. Very unstable,could pop and will corner twit easily.
@@sarikasawhney2278 Thank you so much for informing.
@@porglomber Thank you
so much for informing.
@@Sheikhm007 thx
Eeeeee idk y im saying this here but my valk 2 m and my timer is comin today so im suuuper excitedd
did you get them yet?
@@christhomas6063 lol yee
SCS intro is so nice...
I ordered mine 1 week ago, now I wont need to watch this with a meaning
Thank you Cameron! This tutorial helped me a lot!
i got one! this is AMASING
I love the vid for the corner magnet strength thx
Great video Cameron keep up the great work!
My 11 m pro popped into plastic pieces on my first day you saved my life
Wish I had that cube.😔
Very very good cube
U R’ the best man
What do you think is the best lube/ lube combo for this cube?
thanks now i can easily customize this cube
keep it up
Awesome... so helpful from a newbie. Appreciated
Newbie? He better than u
1% people using their imagination having a GAN 11 m pro😅
I gonna buy one it my 2nd 3x3
hex core magnets + setting 1 on corner magnets = ideal roux set up
The GAN 11 M Pro has 144 customization settings, not 168. The GES nuts have 6 positions, turning the nut a 7th time resets it back to the original position.
It does have 6 positions, but that means turning is a 6th time resets to original state, not 7th. 7th would be original state + 1
I’m thinking about buying the GAN 11 M Pro. Should I get black or primary internals? 🤔 what are your thoughts?
Primary
@@sarikasawhney2278 thank you for your opinion
@@jacksoncuber8626 do u want the reason for why I think that?
@@sarikasawhney2278 yes
@@jacksoncuber8626 ok. The black internals might look better but the primary internals are better for speed solving. It reacts better to lube, gives a smoother feel and overall leads to less lockup’s and fluid solves. That’s why I think that.
Saying because I have an 11m black,primary and an xs. Hope I help.
thank you! i can now fully customize it!
I don't understand how the center blue nut is supposed to adjust corner cutting as the only thing it seems to do is adjust the anchor point of the clear spring loaded nut. So it's just added or removing preload from the clear nut. In other words- adjusting which blue center nut you use, which setting its on, or which setting the clear spring loaded nut is on, are all doing the same thing- adjusting the tightness of the center piece.
0:14 "168 customization possibilities". Apologies, but I'm cursed with a computer science degree--and therefor obsessed with the correct counting of things. Correct me if I get any of this wrong, because I'm not perfect and get hung up on things that aren't relevant. But assuming that you want a symmetrical setup, there are 3 corner magnet settings, 3 core-magnet settings (including removing the magnets that interacts with the core), 4 center-travel (center-spring) limit settings (combined across the two different nuts), and 7 spring tension settings. Funny that the product documentation says there's only 6 spring tension settings. I had to pop a cover to count it correctly myself. What you do is go around until it pops. That's one, not zero. It's a classic off-by-one error. We computer science people are so silly. Anyway, allowing for 3 core magnet settings: 3 * 3 * 4 * 7 = 252.
Hi speed cube shop and cameron
Alternate title : Making an unaffordable cube even more unaffordable
Oh yeah, and don't forget that extra 32 dollar shipping
Shipping is free for me. 🤷🏻
Idk why but my reply got deleted
I said that SCS has 15$ shipping for Asia as well. And if u spend a certain amount u can get free expedited shipping. The current rate for free expedited shipping is to spend 14.5k inr.
@Rayyan Humayun ya. In india the shipping cost is approx $14.98 for the standard shipping.
@@sarikasawhney2278 You can Buy your Cubes in Cubelelo which is an Indian Based Cube Store
And you can also use MACubing Discount Coupon
@@sarikasawhney2278 yeah like everyone has 14.5 thousand rupees right in their pockets. My 6 month school fee itself is around 12k🙄😏
I can buy a brand new cycle with 14k
I think you are quite rich
Aap log kabhi middle class cuber ka dard nahi samjhoge
Kisi ek jamane mein hame bhangar brand cube se cubing karni padti thi!
And for your 15 dollar question, we have to face 15000 questions for so much money.
some common lines from our mahan parampujya matashri and pitaji:
Website safe hain kya?
Scam to nahi?
Apan paas wale dukan mein bhi milte hain.Kyu paise waste kar raha hai?
Beta, padhai kar. Ye bohot mehenga hai.(Even though I get about 100% in every exam!)
Kitne cubes hai re tere paas, aur kya chahiye! (Only 6 cubes hain!)
Ye itna mehenga liquid kyu le raha hain? (lube) paani use kar na!
In middle class families, and even 15rupees is " *too much* " for a child (Child aging from 0-16 years!) to give! He/she might lose it, or worse, overspend it! Sirf sabji/samaan lane ke liye paise milenge!
Mujhe hi pata hain, mein cubes kaise liye hain!
Jaane do, Gan user kya jane YLM wale ka dard!!
Worked very amazing
Thank you so much Cameron! I managed to fix my gan because it almost broke.
Thanks! Learn cube off the net, you r a great help
what loosens it on the blue thing, is 1 loose or 4 loose?
Thanks cameron
The Gan 11 Pro with black internals looks the same as the stickerless Gan xs actually
The magnet adjustment doesn't change the corner magnets under the plastic it only moves the corner stock magnets closer and Farther from the core magnets.
Thank you!!!
You're welcome!
thanks cameron
The corner mechanism:
Does it control the center-corner magnets or the corner-edge magnets?
Saw some reviewers saying the one and some the other and I'm confused 🥴
It moves rhe the corner core magents it moves the magents in the corners it will change the distance from the corner from the core magnets hope this helped
Watch Shawn from Speed Cube Review. In His Gan 11 video you can see the corner stock magnet move in and out of the corner piece when he moved the corner adjustment. Time Stamp: (4 : 10)
Thanks it was very helpful!
Hey Cameron, i was just wondering what lubes do you put in the 11 M Pro when you pay for the pro setup option? I bought one with that option and was just wanting to know what lubes to buy for it when i need it
Nice video!
I didn’t realise that I ordered mine a stickered cube until I got it. Is there any chance I could return it in exchange for a stickerless cube?
Next video:buying a gan 11 m pro like a pro
AY CAMERAN MA FRWEND YAAAAAAAAA POG
I like changing the mangnets and putting the hex magnets but I used tweezers instead of my fingers
Do you goes only have the frosted ones in stock/ when should we expect the soft variation to be shipped?
never now
@@Zyrilix lol I was able to get the soft variation and the uv one.
my precious gan 11 m pro almost was like technoblade. the tensions got changed and it popped luckily im a god so i fixed it.
it already a PRO
Geary video, really helpful :) Just a question though, are you sure that the triangular magnets are weaker? I tried them in my 11 M Pro and they seem stronger to be honest.
Same actually
@@timspencer520 they arent the same
@@purplespacesnail6836 he meant he thought the same, he didn't say they were the same.
Is it just me or do some of these videos look more realistic than real life
same
Who ordered the uv coated version from shopgancube.com and still didn’t get there’s
The uv and soft were delayed
Can you Lube it without breaking the adjustments that can change the corner magnet strength?
Thank you so much.
Great video
For a second I thought that was the Xs?
The 11 M Pro comes in black internals and primary internals for the frosted finish. For the others, they only feature primary.
@@RealNaoh yeah
@@RealNaoh and he said for a second not for the entire video
@@LukiTruki oh I wasn’t expecting you to be here...
@@BradCounter yes, i know i am a cubicle fan, but, that doesn’t mean i can’t watch scs vids
Interesting video!
I'm getting this cube
This should’ve came with a little ranch two lol
i just got an XS like a week or 2 ago ;-;
For the light blue nuts, if the number is high does it mean its tighter?
Would anyone exchange a 30-40$ cube for the gan 11m pro black internal/uv coated. I don’t like the 11m pro that much.
I am having a hard time removing the triangle magnets, any tips how to remove it. On the video , it looks so easy.
Great video...but what abou the nemebers on the corner's magnets please?
First, when I did it, it almost broke but I managed to fix it back
Hey Speed Cube Shop, I have been trying to find a good setup for the Gan 356 air m, and I was wondering what SCS Lube you would recommend for that particular cube, if you have a suggestion please let know , that would definitely help me a lot 👍🏻👍🏻
When you're removing the numerical distancing nut, is it possible for the tension to get messed up? I turned mine from the default to 4 and it keeps popping. Please help
I have an issue during the solve the corner's magnets changes from 1 to 2 or 2 to 3
How do you deal with carpal tunnel?
what about the extra set of magnets? not the triangle or hexagon ones, but some really tiny magnets that came in a plastic bag? do you replace them with the core ones or put them on top of the core ones?
well here goes nothing, i'm putting them on top of the original core magnets in hope for stronger overall magnets
well it didn't work, the extra magnets are obstructking the whole thing and it moves terrible
Even on the tightest tension setting my cube is still super loose. Anyone know what might be happening?
try out tightening elasticity dude
@@Usha_Prasanna I got it figured out. Just had to break it in more
It is hard changing the magnets
Use the screw driver
Cameron please help I was doing the distancing but part and the hexagon thing and the plastic just popped out
Hey SCS can you please tell me what are the default settings for the gan 11 m pro
4:08 How? 😯💨 By using the hextangle magnets?
Uh i need help i turned the tensioning system thing clockwise and now my entire white layer came off and im panicking
when I try, I can't get the center cap off :( and it a little too tight to :/
On my 11 pro wich nuts will make it tighter. I'm on dark blue and it's to loose. I am a hard snappy turner. If the dark blues are the tightest I guess I will Dig and gav the lube it
Mee too I also want gan 11m pro
OMG TYSM now I am sub 10
I ordered a cube from your website and I live in Sa. How long will it take to get here.
the black gan 11 m pro doesnt look like a gan 11 m pro
Troux. Looks like a previous gan cube lmoa
I disagree.
Who thought that this where allot of settings now look at the gan 14
The cube come with what number in the tensions?
I've never solved a cube before and I got this since it was recommended from my friend who's into solving cubes but it seems like it's kind of expensive for cubes from me reading the comments and not a lot of people have it, now I feel like I'm wasting a cube
lol this is the best cube in the world 😂