Vložit
- čas přidán 8. 09. 2024
- This video demonstrate about the charger module XH-M601 which is used to automatically switch ON or switch OFF the battery charger at preset voltage level.
Here viewers can learn how to calibrate or set the minimum and maximum voltage level of the module.
XH-M601 module:
robu.in/produc...
Variable voltage source module (dc to dc buck converter)
www.google.com...
Tnx vaiya.... module ta onek age kinesilam...... setup korte parini ......aap ka video dekh kar hogaya.....tnx
it is a very good video. thank you very much you should good luck.
Thank you so much.
Excellent, thank you !! 👍
🙂Welcome !!
Very nice video sir
Thank you so much.
When connected with battery and the battery discharges and drains to 9volts then the led on the pcb glows but relay doesn't work due to 9v. Under this situation what can be the solution.
We can set the minimum charging voltage to a little bit higher so that the relay can be operated.
@@CSTech2024🙏🙏🙏🙏 Sir, please tell me how to get this output using the same module xh m601...
Relay OFF when car battery voltage is from 0V to 13V.
Relay ON when battery voltage is from 13.1V to 15V.
Can I get the reverse output as mentioned below???
Simply as....
Relay should be OFF when car battery voltage is from 0V to 13V.
Relay ON when battery voltage is from 13.1V to 15V.
Please help how to achieve this output.😊
Hello. nice video, well explained. Can you tell me, please, what are the adjustment limits of this circuit? I would like the relay to connect at a voltage of 13.5 volts and disconnect at 16-17 volts. I want this because I want to use it for an application with a car. When the engine is off, the battery has approximately 12-12.5 V. After starting the engine, the voltage increases because the alternator starts charging and when 13.5 volts are reached, the relay will engage. The upper value of 17 volts is chosen so that the relay remains connected as long as the engine is running, because in fact under normal conditions this value of 17V cannot be reached with an alternator in a 12V car. After you stop the engine, the value of the battery will drop below the cut-off threshold of the relay. This is what I would like to do... do you think that the circuit falls within these limits?
Thank you so much sir. I will try to solve your problem. Till now I used this setup in my home with 7AH battery only.
Nickel Cadmium Battery Charging and discharging procedure and connection diagram
Can it be used for 20v 3.5 or4.7 amp in put what will be a period of the module.
555ic jeat while using charger why??
Is it possible to do the settings without using dc to dc buck converter if so then please reply
Thanks for watching video. Actually for calibration, we need a variable power supply. We can use 317 based variable power supply also.
@@CSTech2024 Pls suggest battery or any other method as buying a dc to dc converter increases the cost
We can use 317 based variable power supply also in place of dc to dc converter
Battery charger contotler module circuit diagram ?
I purchased the module online. Don't have the circuit diagram.
input is DC or AC?
The charging input is AC given to the battery charger.
How use it with DC input (From solar 12v) ,not using 220v ac charger please reply
Got any ideas ?
@@Grvsays nope, it's worthless
Solar panel se connect kar sakte hai kya
@@ramtilwani3904 Yes
Last steps led off nehi ho raha hai , anti clock wise ghumakar last tak jane ke bad bhi
Ye circuit maine without 555ic ke bina banaya hai 3 relay ko use karke😂🤣🤣
An ACDC fan can be run with this circuit
It depends upon your battery, not upon the module.
Low voltage 12v need to on pcb below 12v. Please prepaid video sir
Thanks for watching the video sir.
Please clarify your message. I am unable to understand.
Music ki awaz tu band kar do
how buy
You can buy from robu.in
This video was very helpful! I have power cut off module and input source switcher in one module! Slightly different in structure of this one... Plz can you make a video for my module? I don't know how adjust it!
Kindly share your email address, i will send you pictures and instruction guide! Plz adjust it for me.
अरे संदीप भाई शिक्षा देने वाला वीडियो मे बैकग्राउंड म्यूजिक नहीं दिया जाता है. इस से समझने मे कठिनाई होती है
धन्यवाद भाई। आगे से इस बात का ध्यान रखूंगा।
Circuit Diagram?
Hi, thanks for watching the video.
xh m601 module can be purchased online. The setup circuit is already given in video.
It is not so good module .