Building and Racing a 392 HEMI Swapped C10 In 20 Minutes!
Vložit
- čas přidán 4. 11. 2022
- Building and Racing a 392 HEMI Swapped C10 In 20 Minutes! I put together a compilation video of my Squarebody build so you can binge it in less than 20 minutes!
I have this entire build as a playlist on the homepage of my channel if you'd like to see it in more detail.
Vehicle specifications:
1986 Chevy C10 2wd Single cab short bed
2017 Dodge 392 Hemi out of a ram 2500, has a Texas Speed stage 3 camshaft, and SRT valve springs with hardened pushrods using a Holley terminator X Max for ECU control.
Dropped 5 inches in the front and 6 inches in the back
American racing VN510 18" wheels 275 series tires all around
Stock 8.5" rear diff with a limited slip installed and 3.73 gears
Swapped to a manual transmission using a Chevy Colorado 5spd
Full stainless exhaust custom fabricated by hand.
If you'd like to contact me with business inquiries:
Sales@reignitedtx.com
Follow me on Instagram @reignitedtx
Hemi, hemi swap, hemi build, hemihalf, hemi half, vice grip garage, holley gen 3 hemi swap
squarebody, squarebody build, squarebody project - Auta a dopravní prostředky
I’m glad I’m not the only one that thinks a hemi in a Chevy truck is a way better set up .
I can't tell you how much I love this conversion. WELL DONE!
12.971 is a true muscle truck . you did good .
Great Build! Driver's Truck Forsure
An amazing amount of fabrication in a short period of time AND it all worked. 😊
Can’t wait to do mines I got a 83 Chevy square body 💯🔥
Do it, this truck is ridiculously fun 👍
@@ReignitedAuto could u pls give me your social media I got a few questions i wanna ask for my c10 I need your knowledge.🤘🏽
Pretty awesome build with just a twenty minute test drive before flogging on the track and driving several hundred miles in triple digit heat between tracks and it survived!
Awesome bud!
Great job well fabbed 👍
Love it Skyman,
The engine, sound, stance and fact that you built it is awesome. My favorite part is you converting it to a manual trans. Such a huge part of the driving experience on your trip 👍
You did it! 😊
Love the build! Time to see it on the channel again. Maybe a 6.4 intake with a back to back comparison?
Fun to watch even though I have seen all of the videos on this build.
I love it!
Very impressed on how fast you took it to the track!
This is one of my favorite builds of all time. To bad it was on the trailer and we could go for a ride in it. Can't wait to see where you take this truck. Soooooo much left in it still. Next year I vote Power Tour with a 4 link!
youll pick up some more power with a 6.4 intake manifold. the one you have is off of a 5.7. youre leaving about 40hp on the table
Awesome job and good times! 😊
Nice work!!
Congrats Man!!
Good job Sky
Fantastic
Mate you are one talented man incredible love the hole content well done
Luv it
I see Vise Grip Garage has one now too. I just don't have time to watch a 3 hour video!
nice one, time for big turbo now :)
Nice
Im still surprised that ar5 holds up to the weight and quick shifts.
There is nothing that has surprised me more on this build than the fact that the trans is still together 😄 and I beat on this thing pretty good.
Nice build, doesn’t look like you were getting shit for traction on the rear wheels out of the box. perhaps a set of slicks?
What cam did you use? Wicked build!
hey man what I'm thinking about doing is trying to put a 241 hemi in my first car witch is a 1996 chevy silverado and I'm hoping it will work
@Reignited - Cycle and Automotive What vehicle is that intake manifold from? Love the content and the channel so glad I came across it. That looks like a awesome event
Is there a detailed video of the holly terminater xmax install ?
Can't remember how detailed the video is but here ya go 👍: czcams.com/video/exulSEcCYms/video.html
Might actually be this one 🤔: czcams.com/video/j4T-abKPLDs/video.html
Hey man got a question can the 07 charger 5.7 swap into a 2014 ram 1500 ?
Nice work enjoy your vids. I got a question I have a 2012 5.7 charger with stock manifolds iv ran across some 2015 6.4 srt/ hellcat headers for a good price that I was thinking about buying for the flow upgrade they have the o2 sensor at the flange like the ones you put on the 2010 challenger you had. my question is since the 02s are at the flange an on the mids will they still work?? I watch you challenger video a few time an didn't see where you hooked up those 02s an noticed you fabed the flanges to work with stock mids did you hook all 4 02 up or just the set in the mids an the the others at the flanges on the headers as plugs??
Sorry hope that makes sense 😅 any feedback would be greatly appreciated thx.
Every dyno it?
What happened to the other grill setup that you had on her before?
That was a choice by the previous owner. I wanted the more classic styling of this front end. However I ended up using all aftermarket parts and the quality is terrible.
How can we send you a video of our builds
Are you using a Nag? What did you do for a drive shaft..
Nope, I'm using a manual trans from a 2008 Chevy Colorado 👍 drive shaft was fairly simple due to it being a Chevy to Chevy match-up.
who built the driveline?
Me as well. If you've got any questions I can answer them.
i own johnscustomdrivelinesin california just looked like the driveshaft was really short. usually when i build them i leave about 1'' of the barell showing from the seal of the transmission. clean truck btw. im building a 79 c10 shortbed rn @@ReignitedAuto
@brendenmills8856 oh I gotcha, yes you're correct the actual driveshaft itself needs to be corrected. I just used the stock driveshaft and swapped the front yoke for one that is 2" longer. Not the most ideal situation, but it worked in the short term. Actually looking to update the driveshaft this summer to a proper setup. 👍
Fuck I jus found a good deal for a trans n motor wanna swap my ls 430😂😭
You need to get better music bro.
Just say no to rap.