AUTOCONNECT PROBLEM! JOHN DEERE X739 WINTER TO SUMMER SWITCH
Vložit
- čas přidán 17. 03. 2020
- In this video you'll see how to install or uninstall several John Deere attachments on my John Deere x739 garden tractor. This includes a John Deere AutoConnect mower deck, John Deere 54" Snow Plow and Quick Hitch, John Deere 3 Bin Material Collection System, and John Deere suitcase weights with a Click N Go weight bracket. I thought it would be a completely simple transition from winter to spring setup for the John Deere x739 garden tractor, but when I went to turn on the mower, nothing happened! No belts spinning, no spindles turning, nothing!
So, check it out as this could be a maintenance area that you want to look into on a periodic basis on your John Deere tractor if it's equipped with a AutoConnect mower. The solution is relatively simple, but it's a matter of knowing the pieces you need to repair it correctly. I was so ready to get out and tackle some spring clean up in my yard yesterday, but everything had to wait a day. Thanks so much for taking the time to stop by and please consider subscribing if you haven't done so already!
SHOP: www.goodworkstractors.com
AMAZON: www.amazon.com/shop/goodworkst...
SUBSCRIBE: / goodworkstractors
LIKE: / goodworkstrac. .
FOLLOW: / goodworkstra. .
10% OFF WITH CODE GWT AT LUBE SHUTTLE! www.lube-shuttle.us
5% OFF WITH CODE GWT AT HEAVY HITCH www.heavyhitch.com
5% OFF WITH CODE GWT AT BIG TOOL RACK www.bigtoolrack.com
5% OFF WITH CODE GWT AT GOOD WORKS TRACTORS! www.goodworkstractors.com
5% OFF WITH CODE GWT AT BORA WHEEL SPACERS (COMING SOON!) www.motorsport-tech.com/bora....
*Discount codes cannot be combined with any other promotions, offers, or deals!
**I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support! - Zábava
SHOP: www.goodworkstractors.com
AMAZON: www.amazon.com/shop/goodworkstractors
SUBSCRIBE: czcams.com/users/goodworkstractors
LIKE: facebook.com/goodworkstrac...
FOLLOW: instagram.com/goodworkstra...
10% OFF WITH CODE GWT AT LUBE SHUTTLE! www.lube-shuttle.us
5% OFF WITH CODE GWT AT HEAVY HITCH www.heavyhitch.com
5% OFF WITH CODE GWT AT BIG TOOL RACK www.bigtoolrack.com
5% OFF WITH CODE GWT AT GOOD WORKS TRACTORS! www.goodworkstractors.com
5% OFF WITH CODE GWT AT BORA WHEEL SPACERS (COMING SOON!) www.motorsport-tech.com/bora.html
*Discount codes cannot be combined with any other promotions, offers, or deals!
**I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support!
instablaster
Probably one of the best videos I've seen ! Professional !
It never ceases to amaze me at the quality engineering that goes into a quality product. Yes, costs a little more, but it's worth it. That is slick as can be!!
Me too! Love the designs.
Superb video production. You’ve answered so many questions I was having from older videos.
Thanks you for this video. Getting an X734 with auto connect deck delivered tomorrow. Will put some lock tight on those set screws!
I like how you show the entire process - INCLUDING forgotten steps and broken parts - because I make mistakes also so it's great that you don't edit those parts out. It really makes your videos more interesting and enjoyable. In life, unlike in the movies, we make goofs and it's how we handle those minor errors that makes us who we are. You are honest and hard working. Thanks for the video.
Very well done and glad you took the extra time to explain the keyed shaft issue!
Hi,
Great video showing the transformation from Winter to Summer. Never realized that there was a valve underneath the tractor. I still use my JD 400 for winter plowing which is in awesome condition for being 39 years old. I also have a JD 235 which is my mowing tractor.
Sure do love the 400. Had one for awhile myself. Thanks for watching Tom!
Thank you for your video! I just bought a x595 and took the deck off. Found that little key in my driveway and had no idea where it came from! It was from my mower last deck! You saved me a trip to the dealer wondering why my mower deck didn’t work!
Glad I could help!
Excellent presentation, thanks.
Great video, well done! Thanks for all the info.
Glad you enjoyed it!
Excellent video that is very useful. Thank You. 👍
As always, tremendously informative.
Thank you sir! I forgot to mention, I had my oldest son videoing :)
@@GoodWorksTractors well he did an outstanding job, very steady and kept things well in frame. A young Spielberg to be sure! :)
Awesome 👍. I got my John Deere X575 already to go for mowing season two weekends ago!
Can't wait to mow!
I was unaware of the autoconnect keyway issue, thanks. I will have to check those allen screws for tightness.
I wasn't either until this happened. First time ever for me, but not for the dealer I took it to.
Thanks for great video!😊
i like that X series. Nice rig. It is also a PIA to set up the rear bagger on the 1 series. But it works well with the MCS and I am glad I have it for leaf work in the Fall Thanks for sharing!.
I agree, those baggers are a pain!
@@GoodWorksTractors get a cyclone rake I love mine after three different vacs I would buy this one over and over again.
Love the video. Iv been looking at an x758. Just trying to talk to wife into letting me send 15k on a garden tractor lol. Need something to mow my hill with this would be perfect.
Thanks for sharing. 👍
Thanks for the information.
Thanks for watching Ricky!
Very Cool Mower If I Had To Get A New One This Is What I’d Get.
Gotta do this with my x738 soon!
Spring fever!
Interesting , Thank You
UHMW >> Ultra High Molecular Weight
It's pretty tough stuff that resists abrasion and wear better than other plastics and rubber materials. It is a pain to machine on a mill because likes to resist cutting and deforms away from the milling cutter, then springs back to its memory position. Need to use extremely sharp tooling, and it still is a PITA.
Yes sir, I've heard that. Great material though.
5th and Healthy !
You too my friend
Fantastic helpful video! One quick question that maybe you guys have had to tackle... We have a X758 that has the same auto-connect setup, but our rear draft lock line is not "locking" when the bars go into place, so when you raise the deck it just slides out of position. Any tips on how to adjust that lock so it stays put? Manual doesn't seem to address it anywhere.
Thanks for the review. I always lock the l pins after I raise the bagger frame.
I think my X738 is slightly older than your X739. Starting 5th summer. Dealer told me the 3 bags would be very difficult to empty so I ordered the MC14 dump from the seat hopper. It's ok for grass but stinks for leaves. He was right about the bags. I try to never get them full or just use the hopper.
I could not tell if your power flow belt was installed the correct direction.
Thanks for the info! I think the opposite on the bags. Leaves are very light, but those grass clippings get HEAVY! 😂
@@GoodWorksTractors Yes grass is hard to get out of the bags. To dump leaves from the hopper, I dump with the lever then get off to raise the black cover to push out all the leaves that have stuck up there.
Would suggest putting water resistant grease on the mower deck input shaft. In the key-way and splines. This will prevent the loss of the key and corrosion over time.
Good idea!
@@GoodWorksTractors Also. Retract your hydraulic cylinders so non of the ram is shown. This will discourage pitting and other damage while exposed to the elements. Take care and keep the videos coming.
Yes, someone else also mentioned that as well. Good advice! Stay safe and healthy Gary!
Cory... good vid. I have a X739, 3 years old with 400 hrs. I just had the dealer do some warrantee work this spring on a number of the various steering linkages that were getting worn and sloppy. (To determine problem areas, just jack the rear end up a little with a floor jack, and slop the rear wheels back and forth while watching all of the various joints for slop.) I think he replaced about 4 or 5 parts total, including the "rocker" arm mounted to the frame right next to the side of the engine. I think all of that would have cost me about $400 to $500 if I would have waited past warrantee time.
Good idea! Thanks for pointing that out Dave!
1st - bring on summer
Agreed !
good time to grease the drive shafts prior to
Yep 👍
Do you recommend changing the oil right after each mowing season or right before the beginning of each mowing season? I'll put about 25 hours annually on it. Thanks.
Thanks for the video. I noticed at 15:28 when you raise the deck up and down a couple times, you can hear a rubbing noise. My x758 does this, as well. Anything to be concerned about?
Not sure, I guess I didn't really notice it. I'll have to try it out now and see if it makes a noise or not.
My hanger arms will not lower. The knob will not turn. Any ideas? Does the mower need to be running? If so, how high? Thanks and great step x step. Finally a step by step video.
You can only adjust the mower deck height when in the raise position. Make sure you're doing that. also, if you have a valve for a front plow or snowblower, then make sure that is opened too. Lastly, it make just be stuck from a long winter, so put the parking brake on, machine off, and try to pull it along. There's no weight on the arms right now, so takes a little more effort to lower compared to when it has the weight of the mower deck hanging on it.
@@GoodWorksTractors thanks
Does the mulch control system option (switch with baffle) interfere with the bagger functionality? I've read some reviews that say the mulch control system is NOT as user-friendly as JD states it to be.
Is there a process when going from drop the 54 deck from a 739 to a 48 snow blower? It seems like the short pto that can lift up is not totally out of the way . I saw that after you dropped the deck and drove off that you lifted the mower deck. Does that solve it? Thank you
What garden tractor from the Kubota line would be comparable to this? Is one better than the other in your opinion?
Nice video. I know someone who bought one of these machines last summer, not cheap. For a little more could’ve gotten a 1 series. And Did you find a good deal on window screens or what?
Yep, I've pointed at that minimal price gap before. I'd highly recommend a 1 Series based on best value, but I sure do love operating a X7 Series! It's my neighbors shed, his screens. Presumably didn't want them in the windows, so stored in the shed.
@@GoodWorksTractors The thing is you can't have everything in one tractor IMHO. An X700 base weight I think is 840 lbs, a series one is 1440 lbs if memory serves. The series one is too heavy for continued use on an irrigated lawn. I have an X310 that I use (540.lbs) to mow about an acre of my house lawn and still I have to change how I mow each time so as not to rut up the lawn too bad. I have a series one tractor that I mow the rest of the property that is not irrigated much, just too heavy to use continually on the irrigated lawn around the house. And I leave the front end loader/bucket and backhoe on the series one because, well, I bought it for that kind of work. (loaded weight of about 2800 lbs with drive over deck/loader/hoe)
Just my 2 penny's because it just may not make cents to the rest of you, ha
Do you feel the auto connect pto is worth it? I have heard some mixed reviews about it being more hassle than it is worth. No to mention you have the auto connect under the tractor when snow blowing. When I get my x739 I plan to mow and switch out in the winter for a snow blower. Possibly take the deck off once during the summer to clean and sharpen blades. I feel like it would be easier to just get the standard shaft.
Whether a John Deere 700 series orca Kubota by series, I like the fact that both come off and go back on easy when it’s time to service the deck! , I need to upgrade, I have both a snapper and /22 yr old ( Real Murray) both 46 in. Cut, and they are both a pain to service when you need to remove the deck, I’ve done pulled out all my hair and bald now so I need an upgrade right? While the Deere looks to be alittle bit( not much) easier than the Kubota, The kubota seems to be mechanically better secured which may make a difference over time and wear, what’s your thoughts?
I personally prefer the John Deere system.
Good Works Tractors I would agree that John Deere system is better IF, your frequently dropping your deck to do other stuff, but my needs would have the deck on there all the time and removing only for deck service , Yes the Deere is a little quicker to attach, but both are much better than what I must go thru with what I have now. I’ve watched both manufacturers deck removals and I like them both, for me considering which one to buy , the deal breaker would have to come from a different aspect of these tractors, Thanks, I Enjoy your videos very much!
I'm unable to move the Upper Mower Height Control Knob on my X739 when going to install the drive over mower deck. What's the solution?
we have a X595, X748, X758. the X758 has the quick attach.
Nice, thanks for watching!
Can you use that blade for pushing dirt and gravel. Or digging up grass. Or is it only for snow?
In a previous video he said you can use it to push dirt and what not.
I noticed you didn't mention resetting the mower deck height and deck wheels. It really cuts short then.. lol
Haha, scalp!
How’s it work on my x738 to put the bagger on if I have a 3 point?
It is much easier to drive over the deck rather than backing over it
Let it snow one more time ! Lol
Ha! You can come over and plow me out :)
@@GoodWorksTractors 👍
This are nice machines. I have a 2008 x728 with 55 hrs. On it I don’t use it much but when I do it amazes me what this machine can do. But why don’t they put A three point hitch and rear pto from the factory
Yeah, they are really great machines!
At that point, why not just buy a 1 series?
Those set screws must never be loctited from the factory, I was lucky enough to only lose one on my 1026R and I noticed it. Once loctited they have never come out.
I was told that it wasn't in the original instructions, but was added at some point in the future.
I got so mad and frustrated with my drive on deck I just bought a riding mower. Problem solved. I have a Bush hog for my tractor.
How difficult is doing the 50 hr service on the x739? I heard the hydraulic system needs be flushed due to a hydraulic front axle by the John Deere dealership to do it properly. It is not a simple, drain and flush system is what I have been told.
Lock tight them in with red.... blue wont hold, from a friendly certified tech too :)
😁👍 Thanks!
@@GoodWorksTractors and then you will need to drill them out if it needs to come off
Do you know the part number for the weight bracket?
I don't unfortunately.
HOUSE FOR SALE???????
Movin' to the country! At least hopefully...the whole world is going crazy, so I'm really hoping that doesn't put a crimp in my plans.
Agreed, but still gotta sell the house in the city and hope the economy doesn't completely collapse, haha!
@@GoodWorksTractors Thanks for the reply.
Just remember that "and this too shall pass" Back in 1940/1945 my Mother said that sometimes things do not go the way we want. But have faith as maybe there is a better way that will come along? Stay strong & believe good things will come along!
What a rubbish set up