How To Bend 90's On EMT Conduit
Vložit
- čas přidán 12. 09. 2024
- In this video I am going to show you how to bend 90 degree bends on a 1/2 emt bender. I am going to show you how to bend a short 90 and a longer one 12 inches. I will show you how to figure out how to bend them with ease. All the items will have links below to amazon so you can purchase it and it will help out my channel.
Amazon links to follow:
ideal bender
amzn.to/2R1KYv1
stanley 16 foot tape measure
amzn.to/2xzIcpX
klein level
amzn.to/2UAkuTI
sharpie
amzn.to/3bEPGXu
Cameras And Gear That I Am Using
Canon m50 amzn.to/3h1EA1H
Sigma 16mm f/1.4 amzn.to/344dzXL
Go Pro Hero 7 Black amzn.to/343QWTq
Rode Video Micro Pro amzn.to/3ay2K1E
Comica XD Boom Wireless Microphone amzn.to/3gWHbtT
Movo Wireless Micorphone amzn.to/2PTgeeO
DISCOUNT CODES FOR ITEMS IN ALL OR PREVIOUS VIDEOS:
Tryavax wallets
www.trayvax.com use code Bold10 for 10% off all orders
Industructible shoes for everyone
www.indestructibleshoes.com use code MIKEG58 for 20% off
Surviveware shower wipes
www.surviveware.com use code MNTNRO10 for 10% off
Ideal 1/2 EMT Bender amzn.to/35sUaR0
Klein Dual Strippers amzn.to/3irPZIS
Klein 1/2 EMT Bender amzn.to/2RgixcB
Klein Linesmans pliers amzn.to/3latR7K
Klein 11-1 Screwdriver amzn.to/3glMRfV
Klein Stripper Pliers amzn.to/31mViU6
Santronics Voltage Tester amzn.to/3giLoa5
Scotch 33 Electrical Tape amzn.to/32i8WHi
Milwaukee hook blade knife amzn.to/2DVxkWV
Milwaukee 11-1 Screwdriver amzn.to/2RiiBIG
Klein Mc BX cutter pliers red handle amzn.to/3irg62D
Greenlee MC splitters amzn.to/2Roe1J3
Mailing address
P.O. Box 149
Covington Va 24426
Please Feel Free To Join Me On Patreon And Joining In On The Journey My Link Is As Follows. / mountaineeroutdoors1
PayPal: paypal.me/mountaineeroutdoors
Just get to the 90’s and stop all the chatter. Just show us how to do it
😂 😂 😂 😂 😂
you the goat for these bend videos ! you need a million views!
I appreciate that comment. That would be nice to receive a million views. Thank you for your comment and watching ☺
Thanks to you I’m learning how to bend pipe the easy way ,you the best. 👍🍺
Thanks I appreciate it ☺ Good luck.
Thank you so much for sharing your knowledge generously.
Always my pleasure I love this stuff 😂 😂
Thanks for your time doing those videos means a lot for me help me a lot 👍I’m trying to get electrician skill now
My pleasure thanks for watching and commenting ☺
Good luck! its a great profession
I love your videos! Simple and effective
I appreciate it ☺ have a great day ☺
Have a school comp today thanks for sharing!
How did you do?
2 year old vid. But still much helpful!
Great job man! Thank you!
I appreciate that. Have a great day ☺
Thanks so much for posting this. Great video.
Be well and take care my good sir.
My pleasure thanks for watching and commenting ☺
Thanks, Bud! This was really helpful.
My pleasure thanks for watching and commenting ☺
Thank you for explain all your videos so easy the
My pleasure ☺
Can you make a video of a back to back 90 but with one of the 90s going to the side not just a normal back to back
Ill see what I can do I appreciate the comment
good video. . .. thank you. . .
/
/
/
Great video man! Thanks
My pleasure Thanks for watching and commenting
So much talking, I'm lost.
Bro you need a compass?
You were close enough with my confusing Polish last name, haha. Thanks for the shout out! You're welcome!
Thanks for sharing
Thank you for your videos. Can you make a video how to bend a 90 with an offset in one piece? Thank you
That's an awesome idea. Do you have a particular idea of the exact one you would want to see
Sounds like a good idea for a video I'll see what I can do
Hi, I like you video.Thanks
Thanks ☺
Hi, can you please make a video about how to make a multiple bends 90?
I will keep that in mind. Thanks for watching and commenting ☺
do you recommend a klien bender for home owner?
Yes I honestly would not buy a Gardner bender the Klein and the ideal are the best by far
First view. Great video
Thanks brother now you know how to bend its time for you to help me 😂 😂 😂
Do you only use gain when your getting the full length of the pipe?
I'm not sure what you are asking exactly?
Like when you have your leg length and stub up length. You only use the gain when you are figuring out the full length of pipe needed correct?
So when I'm installing my conduit and I'm coming to a corner, do the same rules apply? Also does my measurement come from the coupling side to the corner when determining the bend distance? So I created a 90 and measured from the connector to the corner. It was 64". Subtracted 6" because I'm using 3/4" so I marked at 58". Put my bender arrow on the mark and I came up an inch short when trying to navigate around the corner. Just curious what might have happened. I'm going to mark at 60" and see if that gets me around the corner and stay connected on the coupling connector. What are your thoughts?
Measure from the center of the coupling tight to the wall then deduct your takeup. Also keep in mind if you are using minis.
Takes near 7 minutes for something to happen... vid needs editing
U want a job
@@MountaineerOutdoors I don’t know what you’re talking about, did you offer Rickie a job bending conduit?
Nope he couldn't even pick up my tool bag without moaning like a little girl
Just curious ..if i am only interested in lets say a run where I want the vertical to be at 50" on a 1/2 pipe ..do I bend 5" less - so 45" then bend.and I get 50"?
The best way to do that is to use the star on bender. Mark it on 50 and it will be 50. Otherwise bend your 90 on a longer piece and you will have to cut it to the correct length. If you do it like you are explaining in your comment it will only be 45.
@@MountaineerOutdoors thanks
@@MountaineerOutdoors tttt
You always leave a half inch then you know you wont kink the end of the tube lol old school way but if you need a box of set you bend that first then the 90 but why is know one saying anything about back to back 90s the easy way cut pipe to total length when its straight mark center then measure from center out then take offs then Ben pipe old school way super simple and it's just quick math and then no cuts after the both bends :) just saying
Hi. Is it possible to make a handle that's about 8" before the 90° bends on each end?
I think that I know what you are asking, your referring to the 90 stub?? If so then absolutely
@@MountaineerOutdoors Thanks. To say it another way, the handle needs to have a bend at each end as if it had 90° elbows but be continuous (no elbows).
Identify and measure the point where to bend 90 degrees and the termination point (Box and Coupling)
Can you answer it😅
I'm not exactly sure what you mean by this?
Install out let's
You mean for a video idea?
At 6:08 your comment was “ if you know what I’m talking about, you know what I’m talking about; I don’t know what you’re talking about and you didn’t explain what your talking about; what were you talking about? If every bender is different why would you direct me to go to Lowe’s and take a photo of the handle of a bender that may be from a different manufacturer, that would not help me and additionally, every bend you made on the video was close but not a correct measurement. Please take the time to be concise with your instructions and explain what you talk about
As for the conduit not being exact I can tell you that it was close enough I wasn't wiring the Taj Mahal. And If you even paid attention to what I said about my quote, if you know what I'm talking about etc. Then you could easily figure it out. Good for you that, that has never happened to you. And for the pictures at lowes... Bro just use your head.. Im not gonna address in any detail for you.. If you would like an explanation hit me up on patron or PayPal
If you know you know refers to having to hammer on the couplings because the emt is slightly distorted from having been bent right at the end. As in you have personally screwed it up the same way and had to strong arm the coupling on. Take a picture of the handle refers to the cheat sheet table most bedders have on the handle- it has multipliers, shink/gain measurements etc. The sticker tends to get scraped up with heavy use.
Thank you ☺
Get er done🇵🇷🇺🇸🇺🇸🇺🇸🇺🇸
That's right
Deduct not take up
The guy that’s training knows what HE needs to do but is a horrible trainer. When it comes to get the measurements how do I go about that?
Tell me exactly what you want to know and I will work on a video
Chris should not have said anything at all.
?
I said that because he is wrong it is not cosine. Cosine is a trigonometry function.
😂 😂 Oh I'm answering on my phone so I didn't see all of the other comments. I now know what you are saying
You yap too much after you said 'let's get right into it'.
Yep nickname is motor mouth 😂 😂
Local 26 or 666 ?
Neither 464
dont own a hoss , so not familiar with hoss crap . . / /
//
/
/
Vsn
Huh?
I had to turn this off. You just blither too damn much and hem and haw around.
Well thanks for the comment anyway
Lame..
Thank you for the comment 😂 😂
Less preaching and more teaching
Noted
Talk too Danmm much... get it done already
I did, I got it done already