Generator Controller DSE 7320 Manual parameter setting No laptop required let's start
Vložit
- čas přidán 25. 06. 2021
- Generator operator training | How to configure dse 7320 controller from front panel without laptop
#generatortraining #DSEcontroller #DGcontroller #Deepseacontroller
ACCESSING THE FRONT PANEL CONFIGURATION EDITOR
• Ensure the engine is at rest and the module is in STOP mode by pressing the Stop/Reset button.
• Press the Stop/Reset and Info buttons simultaneously.
• If a module security PIN has been set, the PIN number request is then
shown :
• Press , the first ‘#’ changes to ‘0’. Press (up) or (down) to adjust it to the
correct value.
• Press (right) when the first digit is correctly entered. The digit you have just entered will now
show ‘#’ for security.
• Repeat this process for the other digits of the PIN number. You can press (left) if you need to
move back to adjust one of the previous digits.
• When is pressed after editing the final PIN digit, the PIN is checked for validity. If the number is
not correct, you must re-enter the PIN.
• If the PIN has been successfully entered (or the module PIN has not been
enabled), the editor is displayed :
EDITING A PARAMETER
• Enter the editor as described above.
• Press the left or right buttons to cycle to the section you wish to view/change.
• Press the up or down buttons to select the parameter you wish to view/change within the currently
selected section.
• To edit the parameter, press to enter edit mode. The parameter begins to flash to indicate that
you are editing the value.
• Press the up or down buttons to change the parameter to the required value.
• Press to save the value. The parameter ceases flashing to indicate that it has been saved.
• To exit the editor at any time, press and hold the button.
Video Tags : #dse_7320 front panel Programming, dse 7320 front panel configuration, dse programming without laptop, dse 7320 configuration via front panel, how to configure dse controller without laptop, dse controller configuration without laptop, dse 7320 controllers parameters editor, How to configure dse 7320 controller from front panel without laptop, Generator operator training, configure without laptop, generator training, dse trainings, dg controller training, dse controller training #dse #7320 #programming #configuration #pcsuite - Věda a technologie
DSE Programming in Urdu/Hindi Chapter -1
Video Link: czcams.com/video/2CciDviyP-w/video.html
DSE Programming in Urdu/Hindi Chapter -2
Video Link: czcams.com/video/mHiIu1KgCK0/video.html
DSE Programming in Urdu/Hindi Chapter -3
video Link: czcams.com/video/Ef5wSAoIeLU/video.html
DSE Programming in Urdu/Hindi Chapter -4
czcams.com/video/h1BU37gpFPY/video.html
Now me expert deap sea any moudle. Thanks 🙏👍
Share with friends
Thank you so Much for such a knowledge 🙏🏽
More please. How to configure over current warning limits/parameters.
kinda self explanatory....
good share!
Thank you so muche , khosh raho abaad rahoo
Excellent
You are video is verry verry nice.I am bangladeshi
Thanks 😊
Thank you so much
You're most welcome
Excellent, but how to configure the different types of oil pressure and temperature sensors and how do you configure the auxiliary inputs and outputs? by the front without a PC?
Software is always recommended as first choice for full control
Great video. Thank you!!
How do i adjust the low oil pressure "warning" that comes on instantly every time i start the Generator?
Via laptop
@@DieselGeneratortraining
Thank you!👍
I really appreciate your channel. I am in the United States and I learned a lot. I also appreciate the English videos as that is my only language, so thanks for all that you do.
great
Good
Thanks
Assalamualaikum wa Rahmatullahi wa barkathuhu Bhai
Thank u so much sir I want cat ecm configuration
Hi, how to set balance engine hours program 8 hour interchange, every 1 hour priority 2 start and stopped .. why ? Like that .. please advise
Thanks
Ur welcome
Sir how configuration of modul with laptop when convert voltage from 220 v to 400 v
Sir how i on and off auto breaker of Generator 1600 Amp after convert voltage from 220 v to 400 v
🌷👌
Bhai genriter ketna minutes chala h kab kab chala h yai check kar na h kaysay karay gay
Please explain 1010 kva kirloskar deep-sea controller wiring diagram and trouble shooting
Deep sea is regularly restart every 2 minute which problems in DSC 7320 please advice
Assalamualaikum. I hope by the grace of allah, you are well.i am from bangladesh.i work in utility side.our company have two 800kva parking diesel generator controlled by 7320 controller.i am requesting to you,please make a video on EASYGEN 3200-5 controller.i am waiting for your love.allh hafez ❤️❤️❤️❤️
Inshallah thanks for commenting Aminul islam
How to enable auto sensing for current?
How can set Max current limit ?
My generator show alarm chaging atumpt than gowng top waht problem plz help me
Please sir,how to remove the maintenance alarm at DSE 6123
Sir hours forward ho jaye h kya
Do you have a video of wiring this up to older generator?
Which older generator u have DLewis
@@DieselGeneratortraining 1994 Generac Diesel 13.2kw on a trailer.
How to reset pre maintenance alarm.. 1770 pin not access in configuration mode ..
Kindly expain
We have GENSET SAKR 450 KVA
Controller DSE7110-MK11
it is not read it properly programming not happened may I know the solution of the problem pls
Replace controller
Hello dear, How we can get all these standard parameters for specific Diesel Genset ? For example, I need to set all parameters from the beginning for specific GESET what standards or documents i should follow?thanks
Please wait
How to increase termina voltage by adjusting the avr
How to access avr
Soon u will see video on it
Which parameters settings required for ATS control.
Parameters? Sir
Asalama alikum bro,
Haw I can change anologe input sensor from default to flexible ports?
Via laptop
7320 yeh pc m connect ni ho rha h pc me Module not recognised. Check DSE website for relevant updates likha huaa show ho rha h or mere pc 7××× update h to bhi ye show ho rha h iska feature unlock code kya h
Reinstall kar k check karain
Sir gen stop but alarm gen stop again again
Sir how to reset maintenance alarm ondse6123
Salam. I would like ask you for Entre pin because I try configure maunl but we need acss.thanks my friend
Someone set password u need to ask the correct password
DSE 7320 FULL DETAILS IN ONE VIDEO SPECIAL FOR GENERATOR ENGINEERS AND TECHNICIANS
czcams.com/video/bsZ8875Xo58/video.html
Hello boss what is the PIN CODE of editor of deep sea 7320 i want to know it thank you sir
From factory no pin only the user can set it
Slam bro.. Display pe loss of mag-pu show kr rha hai to ksy solve hoga kindly btana
Check ur MPU connection and resistance of mpu
How to increase the hour metre reading
Sir please help auto cannot start
Bobby what is the problem plz explain in details
Sir 7320 DES controller display on but parameters not so display
Oil pressure low what is reasen
Check oil pressure with manual gauge if ok replace oil sensor
Brother mostly not understand English so please make in Urdu to adventage aloft of students
Urdu videos are also available on channel
How do I reset service hours?
Via laptop
Generater showing bus not live how to solve the problem...?
Check bus breaker n bus supply
how to fix memory courrption manually
i need how to manually configure for deepsea have only two navigation arrows instead this deepsea has 4 navigation arraws
Watch this video
czcams.com/video/_8ONBzNEJps/video.html
Hii
Please how can I program deapsea oil pressure manualy
We recommend to use 👍 pc suite
Sir my genetor buttery problem
Xhange battery
Sir hours ko kesy increase kry kindly help kry
Karnay kyu hai reason kya hai 😅
How to unlock the generator Sir
What is the alarm ur facing
Hello sir how to configure 7420 deep sea thanks
Will make video on it
@@DieselGeneratortraining thank you sir do you have password of that
Maintenance alarm de rah informs
Plz replay sir
Plz remove the maintenance alarm
Bro governor alarm shutdown
Always comment with full details like Generator model run hours exact alarm type of fuel
DSC 7320 control fitted in kirloskar 320 kva. I press stop & check button
Display show enter password. I request please send me password.
This password only knows who supplied u this generator
pin????
1770 try once
Ok thanks
Sir idia DES controller display
Jee bhai what problem ur facing
Sir my problem is controller display so but display nomber no so
Bangla Speak pls?
What is the password of Perkins Generator display Password
Which controller type
يا خي وين المترجم
Hindi espiik
Asalam O Alaikum i need your contact No to discuss an issue with you of the Module DSE 7310 model
Send email 📧 with your details and company details and country of working
Muzammiloger@hotmail.com