2020 Outlander Xmr Exhaust Day (Loud but Quiet, Great Tone)
Vložit
- čas přidán 12. 10. 2019
- Picked up and installing the Mbrp exhaust on the new Can-Am Outlander 850 Xmr. It sounds Sweet. Performance based without crazy volumes. Thanks for watching, Cheers!
- Zábava
You're sending him in the right direction! Father like son 😎
That is one sweet looking quad I love the way it looks
Awesome video as always bud!🤘 Sounds real clean
Nice easy install there. Cant beat that. Another great video!
Like your channel, like your machines, like you and the family, like the exhaust, save our trails run quiet. 😊
That sounds nice. On the wish list for sure! Just what I'm after.
Sounds great really good
On your way to that silver CZcams button buddy keep up the great vids bro sounds really good too
How's does somebody get a bronze play button an a silver one ?
@@bamhammer6058 100000 followers on CZcams gets you a silver
Sounds mint boy's can't wait to hear it in person.
Hi eh TV
@@SpazGuard Hi Adam, Great vid, eh.
Instablaster
Very cool buddy. Sounds great. 👍👍
I put this pipe on my 2016 850 xmr last night along with a power commander fuel controller with motorsports addicts tune. Also put a cvtech primary on this week set up by motorsports addicts. Close to 6000km on my machine and I bought it new, now it's like a completely different machine, loving it!
@@WeekendWarriors87 did it all the same time, or within 24 hrs of each other. I did disconnect the tuner at one point and tried it without the tune and runs much better with the tuner
@@scottpaul317 ah ok. Thanks!
Nice can for sure
It sounds good he looks excited!
This chanel is the best chanel for ATV.
I loving ATV and moto sports
I like ur plan
What a great Dad! Now you infected your son with the fervor. Thanks for sharing!
Thanks man. We'll see if he can keep up with the old man, haha
It’s great to see ya bring him along. At that age we all wanted to fit in! Those are big shoes to fill, following after his dad. Keep him under your wing, show him the ropes. Can’t wait to watch him move ahead. Thanks!
Awesome...
Like it..
Shalom from Indonesia..
Nice sounding pipe! you say it was a baffled unit? wish you would have shown it from the inlet side down the pipe throat. nice lil vidja!
That sounds sick! Really thinking about putting an exhaust and tuner on my 2020 Can-am 650. Love the machine the olny thing that’s weird is it spits and sputters a lil bit when you floor it from a dead stop. It’s stops bogging once the throttle is held down for like 3 seconds but if you punch it then it lags and takes a second to get going. I looked online and their isn’t really people that have this problem but people are saying that the Can-and run lean from the factory so I’m thinking it could be that? I run 93 in mine an some people say it could be to high of octane for a 650 but I don’t know.
i like the can am
Also do after market snorkels affect the warranty?
I like big cans😜🤙sounds great tho
NOS-ATVs💯🙌💪
I think that sounds good better than most
Yeah it sounds nice
NOS Atvs almost better than the evo.
@@SCOTIAN_ I like it better. The Evo is louder by far but I'm liking the tone of the mbrp a lot more.
Great pipe! 🤘
I like your four wheeler
Thanks bud
Hi, please advise what is R of the wheels and size of tires? Thank you!
Bery good
Ya buddy! lol 850 has some power!
They are around 500ish. Decent price.
I def need to up grade mine I just took out the screen in my xmr.1000 r.
Soo...thanks a lot. Lol. I couldn't take it anymore. I traded my sport bike for a black and yellow 19 renegade 1k. New. Already put a new set of xm310s on it. Way lighter than the cryptids. You can feel the difference picking them up. I'm thinking I like this exhaust. Just enough. Now go kill some skeg! 😁
That's awesome, grats!
I too fell victim to the canadian hoonigan division and bought a 20 xmr 850 . Been dodging the powersports shops like a bad habit till I got to where I could afford it lol keep up the vids boys and hope be able to ride with you guys one day .
This old baby .... launch control dam son
How does this compare to the yoshimura? I have a yoshimura on my 850 and was wondering on the difference
Gear Head This one is a lot quieter if your into that the yoshimura is a lot more louder and raspier.
How many miles does your Can-Am Outlander go by 1-gallon oil?
Also you should get some nuetrino taillights
hey now that you've had it on the bike for a while now. hows this pipe holding up with what you guys pull them through? thx
So far so good. Great exhaust
I just picked myself up a 2020 570 outlander xmr aswell, so ive been watching videos like crazy while the dealer builds it. also noticed the miller truck in the back ground where in Canada are you guys located
Ontario
@@NOSAtvs LOL right on same here, wasn't sure if miller covered more than ontario
Which model bud things sick?
Sounds awesome!! I went with a yoshi on my 15 maverick xmr and I’m a little disappointed in the sound not near as beastly as the mbrp! Love that sound, great sound and awesome looking bike kid congrats!
Thanks bud. He's lovin it!
Getting on a bike and hitting the throttle is the best therapy! How can you not love it? Looking forward to seeing him, you, and eh in the skeg now!
do that 4wheeler is tune ?
why it go 90 mph?
How much for the exhaust
Man that sounds great I been wanting something that sounds good and is not too over bearing for when I’m riding at night around houses and such do you think this one would do? Also what’s the price tag?
Yeah this would be your ticket. Around $550 Cad.
what tires are those ?
How easy is putting a full exhaust on the renegade? I want to get dual empire exhaust for my 19 renegade with an rvs ecu reflash. And I’m also wondering does adding exhaust void the warranty? I’m sure the ecu reflash voids it but does the exhaust? Thanks bud! Great video!
The hmf full system wasn't too bad. Best to talk to your dealer about the warranty
NOS Atvs awesome! I’m gonna have to do some reading to see! Maybe hit them up! Thanks bud! Mint video!
did you have to tune it?
I put a Big Gun on my 1000r love it. $250
Do you need a tuner on these Atvs when changing the exhaust from stock to aftermarket?
Recommend but not necessary with this mbrp
Love the vids and want a four wheeler myself but don’t which one to get
Snds gd and looks bad azz
How fast is it?
Tunes u need a speaker jr..how awesome would that be..
How much was it ?
Huge fan from Florida by the way hope to have the chance to meet you all one day
Do you need a tune to run that? It sounds great!
No you're good without a programmer with this one.
Same as yosi?
@@johnsimmons5565 as far as I know yeah
I got a Polaris ad 😂
Lol. It's all about of road recreation.
Where can I find this exhaust? Just bought the same wheeler. Love your videos.
Mbrp. Grabbed it from dirtylife.ca
I only see rjwc exhaust. Dont see the Mbrp you installed.
@@canampower1711 send him a message and tell him I sent ya. Might not be on the page but he can get them in.
Hows this been? Did you add a programmer? Any issues if you didn't?
No programmer. No issues
How did the mbrp exhaust do after a few years?
Holding strong. Wouldn’t mind getting one for the renegade
Was that mph?
Did u take the screen out? Mine seems a little quieter
No the screen is in.
What's the name of the exhaust
wonder how long it will stay that shiny !?? ;-)) btw like the place youre living at...
Thanks man.
@@NOSAtvs whats the four behind you with the green headlights ? I like it
@@bamhammer6058 its my Renegade
Where abouts in canada are ya? Dont got nothing like that here in ontario
Hunter Creighton dude they are in Ontario lol
@@Canadiancarguy1987 wait really?😂 guess they're way more northern then me, looks like parry sound so you're probably right
Hunter Creighton ya not in Parry sound but Ya north is correct , don’t want to get too creepy here lol
@@Canadiancarguy1987 wicked!
Blue smoke from exhaust
Whish I was there for that mmmm
Nice 👌👌😃
Lord Farquad is that you??
I can’t find it anywhere, where can I buy it and what’s the link if you don’t mind me asking
Mbrp exhaust?
Keeps bringing up diesel truck tips and stuff
Show
🙏🤝👍
what model do u put in for the 850 xmr on the website
Outlander 850 outta work. Part # AT-9209PT
NOS Atvs thank u
Torc locker vs visco ? On standard machine visco locks allso?
The visco will lock all 4 yeah. It works on a friction plate. It's an awesome system. Just doesnt lock up fast enough for our taste.
@@NOSAtvs oh i understand. Tnx i have just bought an Outlander -19 pro+ so i need some upgrade tips
Where did you pick this exhaust up?
Grabbed it from dirtylife.ca
What was the price of this exhaust??? 480 or 580??
When its hits 88 mph your going to see some serious.....lol
Hey man what's the wheel size n spec u got on that 850
29.5 x8s & 10s
Apreciate it
Saludos desde México 😈😎
I’m not going to put a loud exhaust on mine because I live in like a quiet area
Why don’t you put dual exhaust RJWC? It has much better sound and look
It's nice to see and hear other options from time to time. Love my RJWC system, but I still thought about a change up this time round. lol
RJWC is great and all but it's also pretty expensive and not everyone wants a super loud exhaust
I just put this exhaust on this weekend. Not really looking to change it up so soon, lol
You should get a outlander 1000
Probably a 2020 lol
We wanted a short frame xmr. Im still rocking the 1000 renegade xmr. Just seeing what we can do with an 850
Trailer Park Boys...... boys🤣🤣🤣🤣
Its it a 570 or 850
850
I like can am outlander 4wheelers
Hi from Russia, I forgot, what country are you in?
Canada
What city?
Much louder than stock? Much quieter than a rjwc?
Exactly. Just a nice "in between"
NOS Atvs RJWC Has a quiet version called the Krossflow.
yo alomejor la agarro para diciembre la verdad esta bien chingona 😎😎
Comentas que tal jalan kiero una igual
@@yuyintrejogracia8497 si broo en cuanto la agarre te comento hasta are un video para subirlo por si kieres suscribete y ai miras bro
Классный у тебя гараж!
Here
მაგარია ეს კვატროციკლები ძალიან მომწონს და ძალიან მინდა რააააა
That exhaust makes it so you don’t need a programmer?
This one doesn't require a programmer.
So no programmer required??
No more then stock. That being said, they run a little lean from stock. We've been running this one without but wouldn't hurt to add a little fuel to bring exhaust/engine temps down.
@@NOSAtvs ok thanks for the info. Just ordered that same pipe for my 850xt.
Like si eres mexicano y no entiendes nada solo bienes por las cuatris
😁😁😁😁😁😁😎😎😎😎😎
" Be careful on that thing " Haha
Where do u live and are atvs street legal there
Canada brother it's a whole different world compared to the states and everyone's a hell of a lot nicer
Nice and actually im not from the states im from finland atvs are also street legal here
@@gjs2500 I'm from the states and nothing is legal here
Oh😂okay i thought u were from canada but correct me if im wrong but arent atvs street legal in arizona and alaska
@@gjs2500 east side brotha new jersey
Do you have Merch of shirt or jaket
I have some new merch being made. Check out the facebook page for updates.
no fuel tuner? yikes
I think I like the big gun evo u better
Its definitely louder. This was the sweet sounding (programmer not required) slightly quieter option.
NOS Atvs yea I fully understand the big gun is for super loud and great sound if there’s nobody around and the X-men is a good power update and if you have ride through neighborhoods
No helmets required I guess....
i should of bought a can am instead of a grizzly 708
The ol' man just bought a 2020 grizzly. Still have to try it out.
@@NOSAtvs i love my 2018 just dont like the randomly stalling for no reason gets quite annoying.
@@arnoni11 that's odd
@@NOSAtvs might try a EHS tuner after i call the dealership while its still under warranty.
1:08 that box slid awfully far..