How to Remanufacture Kyocera Drum FS1020 1320 DK1110
Vložit
- čas přidán 7. 09. 2024
- How to remove remanufacture and clean Kyocera drum unit DK-1110 for use in FS-1020/1025/1120/1125/1220/1320/1325
How to clean a drum:
• How to Clean an OPC Dr...
Toner cartridges troubleshooting guide:
• Toner Cartridge Troubl...
For any question or suggestion leave a comment
-----------------------------------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
www.linkaccesso...
email: link.accessori@libero.it
other links:
www.emmegiricam...
www.samsung.com...
store.hp.com/us...
www.brother-usa...
-------------------------------------------------------------------------
*It prints like no other **Bestt.Digital** printer. i have always loved Epson for the colors they produce.*
Valew irmão, fiz a limpeza tomei todos os cuidados e no final deu tudo certo...
Um abraço..
thanks for your tutorial video
sir,
verticaly half portion of paper doesnt print. plz help me
You mean half page is blank?
Sir mere pass fs 1120 printer h cyocera ka ur wo left side low printing kr rha ha please help
Kyocera 1620 copier. Recently installed new drum & blade.toner dots appearing on prints.after cleaning fully drum unit,the problem arises again near 400 copies. Solution please.
Check the recovery blade, the mylar blade near the wiper blade. it could be damaged
Hello, i have a kyocera fs1120 mfp machine. it is prints blanks pages when printing or copying. why could it be? Please can you help me.thanks
it could be for lot of reasons. I think you dhould start with the drum
I have a printer of Kyocera 1120 MFP it is miss copying the contents of the document kindly send the solution
what do you mean? Does it prints only blank pages?
My printer print very clear in the center of the paper and print nothing at the right and left... is the drum the problem?
I think the problem could be the toner section. Check if the toner roller has the toner on the whole surface
I am looking to buy a compatible drum for my Fs1125 Ecosys printer but I don't know what drum to get? The machine has DK 1110 Drum unit.
You have to buy a drum for kyocera FS1125. try Delacamp
or uninet imaging
i have kyocera fs1040 printer which prints right and left side fade printing. center printing is ok
I think the proble is in the toner unit, not in the drum unit.
@@viandant5 I have installed new toner but problem still persist now what I do
@@aryans1439 The toner unit is not the toner cartridge. The toner cartridge is only a container. Give a look to the developer roller, the toner blade and so on.
@@viandant5 I had cleaned toner unit and installed new cartridge but toner unit suck all the toner powder and printer shows empty toner and toner unit filled with powder.
My printer KYOCERA FS1020 is printing empty pages. What to do ?
It could be lot of reasons. Check the corona wire, check the contacts between the printer and the drum unit, check if the transfer roller is in the right position
My kyocera 1120 blank of middle, when i copied paper, what should i do
My kyocera taskalfa 1800 print blank page after i repoace the drum. What should i do?
Did you replace the drum unit or only the drum?
@@viandant5 drum only.
@@bernbrul9145 Check the contacts between the drum and the unit, the metal pin inserted into the drum. if it make bad contact this one could be the problem
@@viandant5 I'll check it. But one thing i observed is that the PCR has a spots after i wipe it with wet wipe to clean it..
That spot could give a print defect, not blank copies. I think somethinghas been reassembled in a wrong way. Probably it's a contact problem
thank you
Hi, can you just replace the drum without cleaning the charge roller or the blade?
yes, but it's not so difficult to clean at least the charge roller. you can clean the charge roller without removing it
@Chandan Agrawal remove the drum unit: the charge roller is the soft roller you see over the drum
@Chandan Agrawal this video at the start shows how to remove the drum unit
Kyocera fs 6525MFP is my printer... when I print I will get some ink shade and doted. so how can I solve here? please let me know? Thank you
Probably the problem is the drum unit, try to clean the drum, remove the old toner, check if the drum unit is losing toner. in this case may be the recovery blade is defective
thank you, i ll try.
How can I open the Kyocera 300ci drum? The part is DK-865. I have a line but when I wipe the roller it disappears but when I manually move the roller it reappears. I think it is the plastic blade or something is stuck in side. I have searched for this information to no end. I myself do not know how to do it so I am unwilling to take it apart less I break it without guidance. Thanks
Do you wipe the drum with isopropyl alcohol? If the drum is damaged, the cleaning is useless. However the problem may be on the developer roller
viandant5
Yes I did clean it with alcohol and the problem went away. But then when I manually turn it by turning one of the gear wheels at the end the problem reoccurrs. I clean the cylinder again with alcohol and line disappears. I can only conclude it something to do with the plastic blade/wiper or something behind it. I am new to this. Thank you for responding, I am very grateful.
if the line is vertical, probably the problem is the wiper blade
viandant5
Yes it is vertical. How can I open the drum? Any closest videos how to open it up and then put it back? Thank you.
I've no instructions for this drum, but without a new wiper blade probably ir's useless to open the drum unit
I have two 1120 mfp problem is from 1st printer prints are faint now not 100% black. and from 2nd printer prints shows white stripes on page what should i need to do?
It's difficult to say without checking the printer. The first printer probably has problem to the toner unit. You should try to remove all old toner from the toner hopper and insert a new toner cartridge. it could be the drum unit too, or the transfer roller. try to clean he transfer roller with a cloth lightly dampened with water. the second printer may be has a dirty corona wire. it the stripes are vertical, or the blade of the toner roller could be dirty or defective.
@@viandant5 Sir thanks for your quick reply. Information given is very useful. Another question is do i need to add new developer or drum ever? and if so when? how to know it?. Thanks again and please upload video on cleaning of corona wire, it will be helpful for all viewer.
@@jagdishvarma9738 Do not remove the developer. it would be difficult ro add new developer. only remove the old toner powder. The drum should be removed when worn
@@viandant5 Thanks again. I will contact if i will have any question.
@@viandant5 your suggestion to remove old toner is absolutely right i did so and now print are dark thank genius
May I clean a drum (I mean bigger black roler on 0:29 )?
yes, you can clean the drum
Kyocera 1020 mfp leaving complete black paper
check the corona wire, chen the contacts between the drum and the printer, check the contact inside the drum unit
1120 printer getting noise why?
Difficult to say. For start, which type of noise?
блин...
а я крышку сбоку открывал )))
Sir mere pass fs 1120 printer h cyocera ka ur wo left side low printing kr rha ha please help
Same problem fakrul ji but my printer not printing in the middle...
Sir mere pass fs 1120 printer h cyocera ka ur wo left side low printing kr rha ha please help
I dont understand, which is the defect?