Triumph Bonneville 900cc Street Twin Oil Change Service 4k

Sdílet
Vložit
  • čas přidán 9. 02. 2022
  • This is how to change the oil on your Triumph Street Twin. This may be very similar if not the same for other models and oil changes in general.
    Many Thanks
  • Auta a dopravní prostředky

Komentáře • 26

  • @billferrie6178
    @billferrie6178 Před 2 lety +6

    Triumph recommend that you prefill the oil filter with new oil before fitting.

    • @maximusvr46
      @maximusvr46  Před 2 lety +1

      True, you can do but its not an issue if you dont as it will self fill.

    • @ovegustafsson1791
      @ovegustafsson1791 Před rokem +1

      @@maximusvr46 The engine runs without oil pressure until filter is filled.
      So there is a good reason to fill the filter before fitting.

    • @ripmax333
      @ripmax333 Před 8 měsíci

      ​@@ovegustafsson1791haynes manual also tells you to fill the engine with oil before fitting the new oil filter to avoid creating an Air lock between the oil pump and the filter.

  • @simonlangmead7
    @simonlangmead7 Před 14 dny

    Always fill the new oil filter before installing it. You want quick oil pressure. You can’t just hand tighten the oil filter on this design, you can’t get your hand around it. Using the filter socket is the way to do it. Usually after filter seal ring contacts the base, an additional 3/4 turn will do the job.

  • @benthorn3752
    @benthorn3752 Před 2 lety +1

    Super helpful. Thank you so much.

  • @arceyes
    @arceyes Před 8 měsíci +1

    Nice one, thanks man!

  • @johnwarner4513
    @johnwarner4513 Před 11 měsíci +1

    Well put together video, nice and simple,many thanks👍

  • @virginflyer
    @virginflyer Před 2 lety +3

    Thank you for detailed explanation, I will have confidence now to change mine

  • @joaodessainsaraiva5594
    @joaodessainsaraiva5594 Před 3 měsíci

    What are the wrenches used and where to get them ? Thanks

  • @Doggiesoda
    @Doggiesoda Před rokem

    I’ve asked this of a few videos can you actually see the oil level through the sight glass? I can’t see it at all😮

    • @maximusvr46
      @maximusvr46  Před rokem +1

      Yes if the correct amount of oil is in the engine then you will see the oil in the sight glass. The bike has to be standing upright, not on the side stand.

  • @benthorn3752
    @benthorn3752 Před 2 lety

    What size cap did you use?

    • @fexil7567
      @fexil7567 Před 10 měsíci

      Foro the oil filter, 65 mm, 14 tooth in alliesxpress 3€

  • @josepinchero
    @josepinchero Před 2 lety +1

    the oil filter should only be hand tight? the one you took off here was way way tighter than that. ditto w/ the oil drain plug...just a bit more than hand tight?

    • @maximusvr46
      @maximusvr46  Před 2 lety

      Yes its was tight i even said that in the clip lol! Drain plug usually torque to spec or nicely nipped.

    • @fexil7567
      @fexil7567 Před 10 měsíci

      10nm only

  • @ripmax333
    @ripmax333 Před 2 lety

    do you know the PartNumber for that Oil Filter removal tool?

    • @maximusvr46
      @maximusvr46  Před 2 lety +1

      No sorry, its just a part of a standard removal kit off ebay / amazon with various sizes. Same size as a suzuki filter.

    • @ripmax333
      @ripmax333 Před 2 lety

      @@maximusvr46 a particular Sużuki model?

    • @maximusvr46
      @maximusvr46  Před 2 lety +1

      @@ripmax333 gsxr600 750

    • @ripmax333
      @ripmax333 Před 2 lety

      @@maximusvr46 thanks!

  • @Richard-pe4cx
    @Richard-pe4cx Před 2 lety +1

    looks like someone over tightened your oil filter ;looking forward to doing mine with the center stand which should help with access ,i think triumph should have made access a bit easier .

    • @maximusvr46
      @maximusvr46  Před 2 lety

      This was a bike I had in for its first service after its run in oil change so its come from the dealer like that!

    • @Doggiesoda
      @Doggiesoda Před rokem

      I wish they had a dip stick in stead of that sight glass, I can’t see anything in it😮