Steering servo is 11kg. The carbon version truck comes with a 540 motor, you can also move the esc with the provided mount up onto the top of the 2 center braces. You can then fit standard size batteries ie 5000mah, to fit larger size 540 motors into this aluminum version truck. You need to change out the stock motor mount to the mount that comes in the carbon version truck.
Chinese companies can't do anything without stealing technology from Western companies. Asking a gook to innovate is like telling a special Olympian to beat Michael Phelps.
Excellent review... Looks like a good little ripper.. Was mentioned below the carbon version has the 540 size motor! Wooo!!!. LOTS of features..Love the idea of interchangeable A arms and the ability to add carbon to stiffen things up. Think for the size the 380 setup will do well on 3s... Agree again, the manual is a mess... and no-one likes plastic wheels on their radios. Can't wait for the running video Vas!! Send it!!
Great review Vas 👍. Yes a lot to like , interchangeable parts good suspension and towers . Good rubber on the wheels. The overall impression is good . The proof of the pudding will how it runs with the included power train and if the servo cuts the mustard. Let’s see how she goes. As always enjoyed the unboxing and your opinions.
I have had this little truck for a while now and its had a couple of dozen packs through it.. All in all its a great, durable truck. The speed is absolutely fine, easy fast enough to have loads of fun bashing, my son loves it. For the battery Turingy make a 2700 mah which is easily available, its very cheap and is 105cm long and fits just fine and lasts 20 to 25 minutes,, most of all the battery is cheap so I just bought a few. Only thing I would say is the body on the aluminum version Is not good, it shattered very quickly and did survive even modest bashing. I ended up buying a replacement body. There is a more durable body that comes as standard on the Carbon fibre version. So by the time you have replaced it with that it would have been better to buy the carbon fibre version in the first place.. That is however my only gripe, apart from that its cheap, durable and great fun to drive. its a safe buy if your looking for a high performance Rc truck that's really easy to rive and control (beginner ish).
Thanks heaps, man, really appreciate you stopping by. Yeah, going by your vid, I'll need to bring along my own pack for the extra 💪. Can't wait to run this little guy, it looks super tough. 😎
On Rlaarlo's website they listed the amount they have in stock. I always get that fear of missing out but yet I don't want to over pay either. They have the Omni Termination Carbon Fiber version from $330 to now $250 (sure I know it is a marketing gimmick); but do think we will see this cheaper by the time it hit Amazon? Or buying the pre-sale is the better bargain? Your thoughts.
Will it ever be on Amazon? Over here in Europe they aren't. And the intro price actually was the lowest. I think the standard prices are just a bit too high for what you get.
The choices made feel somewhat inconsistend. For instance the basher/budget friendly A-arms but than the not standard servo size. But than again 1:10 are normally very tough. I guess you will have a hard time breaking it. And this one will be nice and quiete too. Does it have a composite spur as well?
Spur is alloy metal, the diff input gears are also straight cut alloy. The carbon version truck has chrome steel spur & chrome steel spiral cut diff input gears.
Great video mate as always.. can't wait to see the bashing at the unforgiving bmx track Altona hahahahahahaha. Still waiting for my delivery of carbon fiber model with gyro and bigger battery 😂😊
It's almost like they've deliberately included weak electrics knowing that people will probably swap them out, but 48dp...you'd have to faff around trying to get a suitable spur. Confusing choices. Love the show bro 👏👏👏👏
Great informative video again 👌💯. Looks like a very decent little basher. Would have loved to see it be a proper 1/10th-scale in size but that´s just my opinion. Have a good one and keep it up 🤜🤛
I've heard the carbon fibre one has a better radio? I WAS going to buy one of these, but decided to get a Castle ESC and motor for my TA Pro4 instead. They really need an Australian importer
Cheers. Yeah, could've gone a bit bigger and I'm sure a lot of people would've jumped on it. But to be fair, Rlaarlo haven't been around long and they've released some pretty cool cars in that time, this is just another step forward until they eventually come out with bigger trucks.
@@AussieRCPlayground they are definitely heading in the right direction for sure ... Cant wait for future releases and hopefully we see a bigger Monster trucks come out 🔥
Avsome video Vas. Looks good, might get one. 10mm longer wheelbase then a 1/14th EMB-1 Truggy . I think the electronics will just do good in that little truck. ❤ Did it have a mid diff?
Cheers. Depends on the application, I personally prefer the alloy for hard bashing and the carbon for light bashing and circuit work. Both will be great, I'm sure, so I don't think you can go wrong with either one. 🙂
I kinda wished they had the alloy with the upgraded electronics and running gear from the carbon rtr. I guess at least they have the roller available to put your own gear in.
Why do you say it may resemble the Team Magic E5 in size? I have the E5, that's definitely a full-size 1:10, close to a Granite and the likes. This one is way smaller.
I have 3 E5 trucks and they are among the smallest of the 1/10 scales on the market, so that's why I mentioned it. Trucks like the Granite, Big Rock, Stampede, Quantum, etc, look a lot bigger and in a lot of cases, they actually are. My point was to paint a picture that this truck is on the smaller side of the 1/10 scale market. In hindsight, I probably should've just showed some side by side shots, but this was done rather quickly and I didn't have the time.
@@AussieRCPlayground OK maybe it's because my kids' 1:10 trucks are relatively small so my E5 looks big ;-) Agree the length is smaller than the Granite's but width, wheelbase etc. is much closer. But I should stop because this here is about the Terminator and not the E5. And the Terminator indeed is more like a 1:12 than a "small 1:10", fully agree.
Steering servo is 11kg. The carbon version truck comes with a 540 motor, you can also move the esc with the provided mount up onto the top of the 2 center braces. You can then fit standard size batteries ie 5000mah, to fit larger size 540 motors into this aluminum version truck. You need to change out the stock motor mount to the mount that comes in the carbon version truck.
My carbon one arrives today, rlaarlo themselves emailed me and said to run 4s it only needs a 120a esc, motor is low kv so will be fine for 4s
I really wish they had made this a true 1/10 scale...will wait for the future release!
Yeah, fair call. 👍
I think its 1/12
Chinese companies can't do anything without stealing technology from Western companies. Asking a gook to innovate is like telling a special Olympian to beat Michael Phelps.
@@mhcrazygirl5453They call it mini 1:10.🙂
Hi mate I've just ordered the Carbon fiber model RZ001B-C just waiting on delivery. Can't wait to see it in Action mate 😊
Has rlaarlo sent you your tracking numbers?
@seashellbeesaveres7951 I got a reply two days before it arrived 👌. Thanks 😊
I love the green. Sick of seeing blue or red anno
To me looks more like yellow!
Thanks for the in depth review. I also thought the layout of the manual was a mess! Lol
Haha, yeah, I don't know who approved that manual, but it does make it a bit tricky to find the section you want. 😏
Excellent review... Looks like a good little ripper.. Was mentioned below the carbon version has the 540 size motor! Wooo!!!. LOTS of features..Love the idea of interchangeable A arms and the ability to add carbon to stiffen things up.
Think for the size the 380 setup will do well on 3s...
Agree again, the manual is a mess... and no-one likes plastic wheels on their radios.
Can't wait for the running video Vas!! Send it!!
Thanks Steve. Running video will be out soon. 😎
Great review Vas 👍. Yes a lot to like , interchangeable parts good suspension and towers . Good rubber on the wheels. The overall impression is good . The proof of the pudding will how it runs with the included power train and if the servo cuts the mustard. Let’s see how she goes. As always enjoyed the unboxing and your opinions.
Thanks heaps Alan. 🤜🤛
I have had this little truck for a while now and its had a couple of dozen packs through it.. All in all its a great, durable truck. The speed is absolutely fine, easy fast enough to have loads of fun bashing, my son loves it. For the battery Turingy make a 2700 mah which is easily available, its very cheap and is 105cm long and fits just fine and lasts 20 to 25 minutes,, most of all the battery is cheap so I just bought a few. Only thing I would say is the body on the aluminum version Is not good, it shattered very quickly and did survive even modest bashing. I ended up buying a replacement body. There is a more durable body that comes as standard on the Carbon fibre version. So by the time you have replaced it with that it would have been better to buy the carbon fibre version in the first place.. That is however my only gripe, apart from that its cheap, durable and great fun to drive. its a safe buy if your looking for a high performance Rc truck that's really easy to rive and control (beginner ish).
48dp is what youd get in a 1/10th touring car not a truck. I agree 32dp or mod1 is the best standard
Great breakdown dude!! Totally agree with the battery sizing. The stock 2200mah doesn't pack the punch or longevity 👍
Thanks heaps, man, really appreciate you stopping by. Yeah, going by your vid, I'll need to bring along my own pack for the extra 💪. Can't wait to run this little guy, it looks super tough. 😎
Once you will do test riin can you tell which one to buy?? This one or new flux 2. Thanks
On Rlaarlo's website they listed the amount they have in stock. I always get that fear of missing out but yet I don't want to over pay either. They have the Omni Termination Carbon Fiber version from $330 to now $250 (sure I know it is a marketing gimmick); but do think we will see this cheaper by the time it hit Amazon? Or buying the pre-sale is the better bargain? Your thoughts.
Will it ever be on Amazon? Over here in Europe they aren't. And the intro price actually was the lowest. I think the standard prices are just a bit too high for what you get.
@@philote09on the last 2 road cars they've released the pre-sale price was the lowest price they've been. I ordered now just to be safe.
Amazon has it for $234 now 5/29/24
The choices made feel somewhat inconsistend. For instance the basher/budget friendly A-arms but than the not standard servo size.
But than again 1:10 are normally very tough. I guess you will have a hard time breaking it. And this one will be nice and quiete too. Does it have a composite spur as well?
Spur is alloy metal, the diff input gears are also straight cut alloy. The carbon version truck has chrome steel spur & chrome steel spiral cut diff input gears.
Great video mate as always.. can't wait to see the bashing at the unforgiving bmx track Altona hahahahahahaha. Still waiting for my delivery of carbon fiber model with gyro and bigger battery 😂😊
Where do you test the car at
Why not the carbon version for only $50 more?
It's definitely a great deal, for sure.
It's almost like they've deliberately included weak electrics knowing that people will probably swap them out, but 48dp...you'd have to faff around trying to get a suitable spur. Confusing choices.
Love the show bro 👏👏👏👏
Great informative video again 👌💯. Looks like a very decent little basher. Would have loved to see it be a proper 1/10th-scale in size but that´s just my opinion. Have a good one and keep it up 🤜🤛
Hi mate still waiting on the unforgiving track bash 👍🤪🤪🤪🤣. I took my Rlaarlo carbon Version and took it to that track and it Survived today 🎉😂😂😅
The body is pvc
You said that you got the green one! It looks extremely yellow to me 🤔 maybe I need to go to spec savers and get my eyes checked 🤷🏼🤣
I've heard the carbon fibre one has a better radio?
I WAS going to buy one of these, but decided to get a Castle ESC and motor for my TA Pro4 instead.
They really need an Australian importer
Yes the radio is different, it also has a giro.
Good choice. Rlaarlo is guilty of corporate espionage.
What is the length of the front and rear wheel axles, sir? it looks like it's almost 1:10 scale
Awesome unboxing and overview..... Just wish it was a touch bigger and then i would have been sold for sure ... Still looks awesome though 🔥
Cheers. Yeah, could've gone a bit bigger and I'm sure a lot of people would've jumped on it. But to be fair, Rlaarlo haven't been around long and they've released some pretty cool cars in that time, this is just another step forward until they eventually come out with bigger trucks.
@@AussieRCPlayground they are definitely heading in the right direction for sure ... Cant wait for future releases and hopefully we see a bigger Monster trucks come out 🔥
Nice review 😀
First!! Also a 31 minute long video, this oughta be good!!!!
Thanks. Hope you like it! 🙂
im very interested in trying a car from this company they seem to make some great stuff and really driving the competition
Avsome video Vas. Looks good, might get one. 10mm longer wheelbase then a 1/14th EMB-1 Truggy . I think the electronics will just do good in that little truck. ❤
Did it have a mid diff?
Yes it does.
Yes, it has a centre diff. 👍
Thanks for stoping by, Thomas. 😎
This looks like a nice, well built truck! Still can't make my mind up to go with either the carbon RTR or the base RTR version.
Cheers. Depends on the application, I personally prefer the alloy for hard bashing and the carbon for light bashing and circuit work. Both will be great, I'm sure, so I don't think you can go wrong with either one. 🙂
I kinda wished they had the alloy with the upgraded electronics and running gear from the carbon rtr. I guess at least they have the roller available to put your own gear in.
What’s the length of this battery?
Why do you say it may resemble the Team Magic E5 in size? I have the E5, that's definitely a full-size 1:10, close to a Granite and the likes. This one is way smaller.
I have 3 E5 trucks and they are among the smallest of the 1/10 scales on the market, so that's why I mentioned it. Trucks like the Granite, Big Rock, Stampede, Quantum, etc, look a lot bigger and in a lot of cases, they actually are. My point was to paint a picture that this truck is on the smaller side of the 1/10 scale market. In hindsight, I probably should've just showed some side by side shots, but this was done rather quickly and I didn't have the time.
@@AussieRCPlayground OK maybe it's because my kids' 1:10 trucks are relatively small so my E5 looks big ;-) Agree the length is smaller than the Granite's but width, wheelbase etc. is much closer. But I should stop because this here is about the Terminator and not the E5. And the Terminator indeed is more like a 1:12 than a "small 1:10", fully agree.
Vas what is the outer diameter of the tyres.