UPDATE: Hey guys, thank you for watching this video...if this has helped you out in any way please SUBSCRIBE, press that LIKE BUTTON and leave a COMMENT. If you are interested in more information for this product- amzn.to/3nfcPHa Better options- amzn.to/3ayWLL8 Reviews- amzn.to/3aweti8 If you would like to help this channel, your donations are appreciated. Cashapp- $PeterLCG VEMO- PeterLCG THANK YOU
Thank you for this. Replaced the battery on mine and everything popped out everywhere. Trying to work out the right combination for the parts for the last hour and then found your video. Still have a problem with the orange button getting screw-jawed. I'm afraid if I tried to spot glue that into place I'd have to buy a new flashlight
Everything fell out, i thought i had Everything and couldn't get it to work, then after watching your video, realized i was missing the spring, i found it now it's working. Thanks for the video.
Thank you for this. Replaced the battery on mine and everything popped out everywhere. Trying to work out the right combination for the parts for the last hour and then found your video. You’re a life saver.
Thanks for the video man, I had the same problem. But here’s the thing, you’re missing an important piece: there’s a thin metal ring which you don’t show or mention and that should go on top of the last piece and, once screwed, holds everything into place. That’s what prevents everything from falling apart when you open the flashlight. Maybe you missed it? 🥲 Thanks !!!
Thanks So Much! The reassembly was driving me crazy! BTW a Small piece of electrical tape stuck on the outside of the white plastic piece opposite the metal contact is a great friction fitting shim to stabilize everything inside the black metal cap!
Your video helped me get the switch in right side up. I spent way too much time fiddling with it. But, alas, after reassembling everything as well as testing the function of the switch, I realize the LED has failed.
Thank you so much for posting this video, the end popped off mine and I was just sat looking at a pile of little bits 🤣 I now have a working torch. Thanks 👍
Thanks man. After it fell apart on the floor, I spent a good hour trying to put it back together - upside down. I would never have figured it out without this vid!!
Thanks for the great video. You saved my flashlight. Although missing the little spring, I had the white piece backwards. After flipping it my light works!
Thank you so much for this video because I KNEW that I could do this, but I couldn’t figure out how to make it work again because I had even taken apart the SWITCH which was very minute & got that fixed but the very last step I had to watch how yours came apart to put it back together to turn it on again . But… pushing the power button made it go right back in again! 🤦🏼♀️ I know EXACTLY what you mean by saying it’s so flimsy ! I
Thanks Sir.. I’ve bought 4 of these components, no directions, no instructions, no nothing.. just a little plastic tube, No battery size, ( I’d assume AA Round?? )But..... I believe You, and in what You’re teaching.. Why do these Companies do this sorta thing??? Grrrrrrr!!!!!!!!
Thank you. Have the Pro-4 tactical piece of junk. Darn spring goes crooked under copper button constantly. Opened it, shot apart. There is no retaining ring! But with this video I saw how to reassemble.
Thank you so much. My husband was frustrated when everything fell apart. Your instructions were easy to follow and showed a great step by step illustration!
Great Had the same problem. When I took the end cap off the whole end fell apart so I had no idea how to put back together Worked perfectly afterwards Thanks
Thanks for the video man! I had this flashlight for 4 years and it finally came apart on the end like yours. Had no clue how to put it all back together. Works great again
Thanks you saved me from throwing this flashlight in the garbage. I did not need to glue it, because it stayed in pretty well, but if it shoots off again, yes then I will glue it. Good Job!!!
Thanks so much for this. I love my torch and when it stopped working I was annoyed because I couldn't put it back together properly. I think it was originally assembled back to front which is why it stopped working and then all fell out when I opened it. Strangely it did work, but now it works perfectly. :)
Thanks. My Friend brought me this FL in pieces and I couldn't get it quite together right until I saw your video! I did have to bend the contact slightly to get it right but it works good now! Thanks!
cool., i have a quantum light same set up and when you change the batteries the push button comes apart,, wasn't sure how it went back together...you nailed it..works now...thx
Fixed my flashlight, thanks for the info. The rubber button was sinking into the bottom of the flashlight, this video helped me realize how to put it back together after I took apart the inside button parts.
You are the absolute shit. I cannot find one diagram but apparently all these flashlights are the same if they are built by this similar design. I have that Atomic beam you saw advertised on TV a few times lol, but it's literally the same thing. Same schematics same yada yada. I've been fumbling the but this shit for like 30 minutes. All I needed was a visual reference and you delivered. Props. Subbed, and liked. I almost went insane. Thanks bro. From the bottom of my heart. Damn I love CZcams!
Real creepy doll man says, thank you man, for show how the fix the switch on the flashlight. I have a different prototype mines is actually an atomic Beam made by bulbhead.
What is kwazy gwue.... And the colored end piece and you said Gween ? Just curious if you need to go bwak tuse skoow to wern howe to spweek pwopurly. Just swayin'
XML T6 is not the name of the flashlight itself but the name of the led bulb model inside flashlight . It's CREE that makes led bulp and is an American company making bulp to almost all the flashlight to many cars led bulp on ebay. (xm-l t6) (xm-l2 t6)
I have the same flashlights & they have been collecting dust for 2 years bc I did not get the 3 battery piece to put in flashlight. I only received a white tube that is too long. When I TRY to put batteries in the tube, the tube sticks out the end & I cannot put the end piece that screws on bc of the tube. Very frustrating!!! Any suggestions? It would be VERY appreciated!
My flashlight's switch is not the same as yours but it is close. My problem is not that it came apart but that the switch often does not work so I just want to know how to take it apart. This video does not help me since it does not show how to get it apart.
UPDATE:
Hey guys, thank you for watching this video...if this has helped you out in any way please SUBSCRIBE, press that LIKE BUTTON and leave a COMMENT.
If you are interested in more information for this product-
amzn.to/3nfcPHa
Better options-
amzn.to/3ayWLL8
Reviews-
amzn.to/3aweti8
If you would like to help this channel, your donations are appreciated.
Cashapp- $PeterLCG
VEMO- PeterLCG
THANK YOU
instablaster...
Thank you for this. Replaced the battery on mine and everything popped out everywhere. Trying to work out the right combination for the parts for the last hour and then found your video. Still have a problem with the orange button getting screw-jawed. I'm afraid if I tried to spot glue that into place I'd have to buy a new flashlight
Everything fell out, i thought i had Everything and couldn't get it to work, then after watching your video, realized i was missing the spring, i found it now it's working. Thanks for the video.
Thank you for this. Replaced the battery on mine and everything popped out everywhere. Trying to work out the right combination for the parts for the last hour and then found your video. You’re a life saver.
Same!
Thanks for the video man, I had the same problem.
But here’s the thing, you’re missing an important piece: there’s a thin metal ring which you don’t show or mention and that should go on top of the last piece and, once screwed, holds everything into place. That’s what prevents everything from falling apart when you open the flashlight.
Maybe you missed it? 🥲
Thanks !!!
I unscrewed the back to change the batteries and everything shot out like so many others ran into.
Thanks a lot, great job.
Thanks So Much! The reassembly was driving me crazy! BTW a Small piece of electrical tape stuck on the outside of the white plastic piece opposite the metal contact is a great friction fitting shim to stabilize everything inside the black metal cap!
Your video helped me get the switch in right side up. I spent way too much time fiddling with it. But, alas, after reassembling everything as well as testing the function of the switch, I realize the LED has failed.
Thank you so much for posting this video, the end popped off mine and I was just sat looking at a pile of little bits 🤣 I now have a working torch. Thanks 👍
Thank you for your help!
I too tried to figure it out and failed. Thank you for figuring out this puzzle!
Thanks man. After it fell apart on the floor, I spent a good hour trying to put it back together - upside down. I would never have figured it out without this vid!!
Thanks for the great video. You saved my flashlight. Although missing the little spring, I had the white piece backwards. After flipping it my light works!
Many thanks. The torch had been dissasembled and left in a drawer for weeks awaiting a solution to fix it. Thanks to you, I finally made it !!
Thank you so much for this video because I KNEW that I could do this, but I couldn’t figure out how to make it work again because I had even taken apart the SWITCH which was very minute & got that fixed but the very last step I had to watch how yours came apart to put it back together to turn it on again . But… pushing the power button made it go right back in again! 🤦🏼♀️ I know EXACTLY what you mean by saying it’s so flimsy ! I
Thanks Sir.. I’ve bought 4 of these components, no directions, no instructions, no nothing.. just a little plastic tube, No battery size, ( I’d assume AA Round?? )But..... I believe You, and in what You’re teaching.. Why do these Companies do this sorta thing??? Grrrrrrr!!!!!!!!
Wow! You saved me also. Everything came apart & I was totally lost untii I came across your video. Thank you very much.
Not a bad light otherwise.
Thank you. Have the Pro-4 tactical piece of junk. Darn spring goes crooked under copper button constantly. Opened it, shot apart. There is no retaining ring! But with this video I saw how to reassemble.
Thank you so much. My husband was frustrated when everything fell apart. Your instructions were easy to follow and showed a great step by step illustration!
Thanks, you saved my torch from being launched against a wall with your video!
Great Had the same problem. When I took the end cap off the whole end fell apart so I had no idea how to put back together
Worked perfectly afterwards Thanks
Thanks for the video man! I had this flashlight for 4 years and it finally came apart on the end like yours. Had no clue how to put it all back together. Works great again
Mine fell apart and I missed the little copper piece. Your video showed me what to look for. Works fine again, thank you.
Thanks you saved me from throwing this flashlight in the garbage. I did not need to glue it, because it stayed in pretty well, but if it shoots off again, yes then I will glue it. Good Job!!!
I used a double sided adhesive tape it works really well keeping it a snug fit so it doesnt move around and its stayed in place for 2 years now
Thanks so much for this. I love my torch and when it stopped working I was annoyed because I couldn't put it back together properly. I think it was originally assembled back to front which is why it stopped working and then all fell out when I opened it. Strangely it did work, but now it works perfectly. :)
Save my life !!! I was so upset with this flashlight when it arrived, thinking to return it. Now I'm good.
Thank you!
Thanks. My Friend brought me this FL in pieces and I couldn't get it quite together right until I saw your video! I did have to bend the contact slightly to get it right but it works good now! Thanks!
Absolutely thanks my xt808 is back together again thanks to you. Very happy we have people like you with youtube help videos.
Thanks this is what u needed to see, stupid thing worked fine until I left it in my truck in the freezing cold.
Thank you so much for posting this. Flashlight flew apart and could not figure out how to do it. This video helped me fix it. Thanks again
Oh my gosh! I almost ordered a new one! Thank you so much for solving this problem! It’s nice to have my flashlight back!
Thank you so much for this video, I have been going mad for hours trying to fix this damn light and you have shown me the answer...Hoorah
cool., i have a quantum light same set up and when you change the batteries the push button comes apart,, wasn't sure how it went back together...you nailed it..works now...thx
Thank you very much. It drove me crazy untill i saw your video
Omg With the “uhh”and “umms”! Killin me
After a few failed attempts I googled your video and that helped me out. Thanks
Thank you for video. I was messing with it for at least an hour.
Thanks this fixed my Eveready torch with same issue.cheers
Fixed my flashlight, thanks for the info. The rubber button was sinking into the bottom of the flashlight, this video helped me realize how to put it back together after I took apart the inside button parts.
Lifesaver! I spent an hour trying to fix this damn thing and decided to CZcams it, thank you.
The battery holds it all together!
It is missing a locking nut that goes on top of the switch inside that aluminum case
Saved another life here thanks a ton. I tried to figured it out and had it backwards, great video!
Thank you, you are a genius, saved me $12 bucks.
The only problem the flashlight didn't have a switch or you in a spring, so I had one for spare parts from another flashlight.
There is suppose to be a retainer ring that screws down tight to hold everything to the end cap. Looks like it's somehow missing from your flashlight.
Thank you! I lost the stinking spring somewhere. Attempting to use a spring from a G2 gel pen. Think it's a bit small. We'll see.
No problem.
Thanks this is exactly what I was looking for. Thanks!
Thank you for this video. Saved me buying a new one!
Mine snapped in into place thank you for the video
Thank you! I couldn’t figure this out, this video help me
Thanks! Just dropped mine and had a lil struggle. My spring was upside down
YOU ARE THE M A N!! thank you thank you. I love this lite and was so pissed I couldn’t get it to work again!!
Thank you! I couldn’t figure this out so I really appreciate the video!
Thank you mate. I had the same issue as you and I didn't know how the hell can I put it back lol
Glad I could help.
Glad it worked.
@@peterl6095 You helped me too, just now! Ha ha!! I had it every which way but loose!
You are the absolute shit. I cannot find one diagram but apparently all these flashlights are the same if they are built by this similar design. I have that Atomic beam you saw advertised on TV a few times lol, but it's literally the same thing. Same schematics same yada yada. I've been fumbling the but this shit for like 30 minutes. All I needed was a visual reference and you delivered. Props. Subbed, and liked. I almost went insane. Thanks bro. From the bottom of my heart. Damn I love CZcams!
Thanks for the uploading the video.. I was trying to figure it out for a couple of hours. 👍🏼
Thank you, you saved my trip😂
Thank god for this video, thanks a ton!!
Eric Chesser Outside yeah lets thank the good lord him self for a flash light video... dope.
Your video really helped.😊
Real creepy doll man says, thank you man, for show how the fix the switch on the flashlight. I have a different prototype mines is actually an atomic Beam made by bulbhead.
What is kwazy gwue.... And the colored end piece and you said Gween ? Just curious if you need to go bwak tuse skoow to wern howe to spweek pwopurly. Just swayin'
Where am i? Damnnn i bought last month and facing the same problem here. Had i found this video early, i would have gone for other light
You've gotta use 18650 battery's or 2 cr123a battery's
Your missing the metal screw-in part/cover that goes on last.
I was just wondering before I clicked on this video what it would be like if my five-year-old grandson made a video on this subject.....
Thank for your help.just fixed mine😂
Great video!! Thank you
Ty looked every where ams found you!
I appreciate simple instructions..lol
Thanks from Germany, I had the same problem :-)
Glad it worked.
XML T6 is not the name of the flashlight itself but the name of the led bulb model inside flashlight .
It's CREE that makes led bulp and is an American company making bulp
to almost all the flashlight to many cars led bulp on ebay.
(xm-l t6) (xm-l2 t6)
Hello, do you know how to remove the led? Mine have problems with the led and I have tried a lot of time to open up without success..
YOOOOOO THANK YOU SOOOO MUCH!!!!!! You have no idea smh......then again you do
Thank You soooo much !!! It was driving me crazy.
I had the same problem. Now i got it. Thanks !
Thanks for posting this, you really helped me out!
Thanks. This was helpful. Many blessings your way.😇
Thank you. Total lifesaver.
I have the same flashlights & they have been collecting dust for 2 years bc I did not get the 3 battery piece to put in flashlight. I only received a white tube that is too long. When I TRY to put batteries in the tube, the tube sticks out the end & I cannot put the end piece that screws on bc of the tube. Very frustrating!!! Any suggestions? It would be VERY appreciated!
@Jose Caballero
Hey thanks, never thought I'd get to use it! I'll buy 1 and hopefully I will have an insanely bright flashlight. Thanks again!
Please show me how to take off the chip led
Thanks dude!!, same advice helped me with my Tac Light (Bell Howell)
You were on point with the problem thank you😁
Please tell me how to take this switch out....
Set video speed 1.5x, your welcome.
thank you for this video..saved me a lot of frustration!
you are amazing
Very helpful, thank you!
Thank you!
My flashlight's switch is not the same as yours but it is close. My problem is not that it came apart but that the switch often does not work so I just want to know how to take it apart. This video does not help me since it does not show how to get it apart.
Thanks man thank you so much it helped a lot i was able to fix my light and it works great now
Thank you , 😊
Thank you 🙏🏽
Thank you so much, you saved my life
You forgot to show how to actually unscrew it.
THANK YOU!!! GREAT VIDEO!
THANK YOU
It was hard to watch when you say "umm" with every sentence.
Maybe you should just say "thank you for helping everybody out".
does anyone know how to fix a samite flashlight
Mine came completely apart... even all that in the white thing, which I did not see anything to help with that...
O how do
You say glue?
Cheers pal, very helpful!