How to Replace Water Pump Gasket 1999-07 Chevy Silverado
Vložit
- čas přidán 13. 09. 2024
- Buy Now!
New Water Pump Gasket from 1AAuto.com 1aau.to/ia/ACEE...
These gaskets seal the gap between the engine block and the water pump. A leaky gasket could end in disaster if not taken care of quickly. This video shows you how to install new water pump gaskets on your 1999-2007 Chevy Silverado.
• Check here for more videos on the 1999-2007 Chevy Silverado: • Chevy Silverado 1999-2...
This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaT/1AX...
• 15mm Socket 1aau.to/oaL/1AX...
• 8mm Socket 1aau.to/oax/1AX...
• Coolant Funnel Set 1aau.to/oc/1AXA...
• Fan Clutch Wrench
• Serpentine Belt Tensioner Tool 1aau.to/oc/1AXA...
• Trim Tool Set 1aau.to/oJ/1AXX...
• Ratchet 1aau.to/oa8/1AX...
• Socket Driver
• Socket Extensions 1aau.to/oaL/1AX...
• Swivel
• Torque Wrench 1aau.to/oan/1AX...
• Rust Penetrant
• Drain Pan 1aau.to/oq/1AXA...
• Razor Blade / Gasket Scraper 1aau.to/on/1AXA...
Subscribe: / @trq
Check out our playlist:
Chevy Silverado 1999-2007 1st Gen: • Chevy Silverado 1999-2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Thank you man! Just did my gaskets. No more leaks!! I didn't even have to take off my fan. Just left it on same with the thermostat housing
So sealants are not necessary for the gaskets then??
Great video, explains everything and really takes his time and has exact torque specs
excellent, needed to know if I had to use sealants on threads and messy gasket sealants too. Will be doing my 2003 Envoy 5.3 this weekend
Great walkthrough. I couldn't help but notice you didn't mention coolant volume specifications?
Great informative video, very helpful. Thanks!
@TRQ Also you mentioned the mounting bolt should not go into the cooling jacket but can you tell us why they shouldn’t? And what would cause them to go in the cooling jacket if they are not supposed to be able to? Thanks in advance for the Info Great Videos!
Are we supposed to burp the cooling system after dumping and replacing the coolant? Or is it as simple as fill to full level then reinstall cap and your done?
TRQ did Silverado dirty by picking out the rustiest one for the video 😂
Why do you have to take the thermostat housing off?
You didn't have to take off the tensioner pulley
Should I use lock tight?
+Valley Heat Kennel Thanks for watching! No need to use lock tight for this repair.