Mechanical Problems [PART 25] 10 Minutes Mechanical Fails and more
Vložit
- čas přidán 26. 05. 2022
- Here you have our monthly Mechanical Problems Compilation made with content received from you guys.
Hope you enjoy it!
Contact us at 👉 contact@carhax.com
Submit your videos here 👉 carhax-video-submission.com
If you are from Europe, you can order our first car care products from here 👉 carhax.com 🔥🔥🔥
Just a friendly reminder to hit that notification bell, so you never miss a beat of our fantastic content. Thank you for being a part of our community!
Watch also:
Mechanical Problems Compilation [Part 24] 👉 • Mechanical Problems Co...
Mechanical Problems Compilation [Part 23] 👉 • Mechanical Problems Co...
Mechanical Problems [Winter Edition] 👉 • Mechanical Problems Co...
Mechanical Problems Compilation [Part 22] 👉 • Mechanical Problems Co...
Mechanical Problems Compilation [Part 21] 👉 • Mechanical Problems Co...
Mechanical Problems Compilation [Part 20] 👉 • Mechanical Problems Co...
Mechanical Problems Compilation [Part 19] 👉 • Mechanical Problems Co...
Watch also our best experiments:
How hard is a normal car glass compared to Tesla 👉 • How hard is a normal c...
Brake rotors out of Lead, Aluminium, and Copper 👉 • I've made brake rotors...
Defrost your windshield in seconds with this trick 👉 • Video
Tire made out of coca-cola, toilet paper, & sawdust 👉 • I’ve made a tire out o...
I've made a Crazy Cart from a shopping cart 👉 • I've made a drift Cart...
GoPro Inside a CAR TIRE (TIRE vs. 100 NAILS). 👉 • Can This Tire Survive ...
I've made an Airless Tire with windshield sealant 👉 • I've made an Airless ...
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal toolset (I have bought this one for almost 3 years, and I still use it)
s.click.aliexpress.com/e/basZfJg8
-22 pieces of a removal tool set
s.click.aliexpress.com/e/_d8Y...
-7 parts of cheap removal tool set
s.click.aliexpress.com/e/c5FEA6Uo
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpress.com/e/cdIOzPBK
-Long Torx Screwdriver T15 T20 T25 T27 T30(use Torx t20 to remove the car exterior door handles. Almost all cars have this screw)
s.click.aliexpress.com/e/cDOzHHLw
Small Electric Drill Cordless Screwdriver:
s.click.aliexpress.com/e/iAkSGXm
Hooks:
s.click.aliexpress.com/e/bGDvRimM
Flexible Magnetic Pick-Up Tool:
s.click.aliexpress.com/e/btR4NInm
Rubber Eraser disk:
s.click.aliexpress.com/e/_Bf9... (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexpress.com/e/CbIfLBK
Infrared Thermometer:
s.click.aliexpress.com/e/_d61...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
#Mechanical #Problems #car #mechanic #customerstates - Auta a dopravní prostředky
💸 Exciting News! Earn $30 for Your Videos! 💰💰
We've got awesome news - You can now earn $30 for each video that makes it into our compilation videos! 💸🎉
Submit your Customer States, Mechanical Fails... clips/photos at carhax-video-submission.com/upload-video
6:02 The way it just spits out the driveshaft, the truck is saying “Nope, this will not do”
(dyno noises)
(BANG!!)
(sparks, small fireball, faint clunking sounds)
oh, hello driveshaft.
driveshaft has left the chat
@@bassiclymike knock knock, who’s there? Driveshaft!
driveshaft: ok I quit bye (driveshaft has left the server)
transmission: is anyone gonna get him or no cause I need driveshaft back
0:18 THE CAPTIONS SAY "PISSED IN THERE"
7:22 It's like a cat when it gets pissed off
1:23 will always be the funniest caught reaction… the gasp to the scream was priceless
4:03 George Jetson called, he wants his car back
Fun fact, George Jetson was born in 2022 :)
@@christopherrogers303 dude I looked that up, checks out. That's so cool
1:39 the rule of a car wash is to honk your horn in case there is an “emergency”
you'd think they would have a sign? I have yet to see one, although I rarely use car washes. or even wash my truck..
@@Liquid_Mike I huh well your in luck I guess cause everytime I go to one there’s a sign.
07:22 that Truck is like 🦟🦗🦟🦗
The Ford F-150 Flex Edition!
6:16 sounded like Alvin from Alvin and the chipmunks when he was in the dishwasher.
It's amazing how few mechanics use eye protection especially while using an angle grinder.
it's called the "safety squint". we all use it...some better than others.
I only use it when using power tools, or things I know will leave dust or shrapnel. Otherwise, they get all foggy and it's more worrying than not having them on
they don't pay us enough to care about living
1:20 That dude's car really wasn't amused about the airbag light looking like a tube blowing bubble gum immediately loses oil pressure and triggers to check gauges light
The trouble is, the preferred tool used by the thieves is just as effective at removing protective cages as it is at removing the converters.
True, but it adds time to the 'job.' Thieves usually want to do their 'work' as quickly as possible. If they see a cage on your car, they are likely to bail and find another one without. It's the "I don't have to outrun the bear, I just have to outrun my friend" situation.
@@clover7359 At 3am in the morning? Under the car? Doubtful. 😒
But it makes the process longer
@@clover7359 Agreed 👍
Thieves hate work, thats why they steal. Easy money is the only kind they're into. Make it just alittle too much like work and it will deter just about every single one of them. Granted I agree about the mesh cage in the video, too easily dealt with, but some 1/4 steal bars or a coil spring from a strut will do the trick.
5:52 it always hurts when i see a dyno clip start up in these types of video, because you know someone's beloved baby is about to turn into confetti
I loved that last clip XD that old guy's got some SPUNK!
1:08 Change your muffler bearings folks.
6:00 Driveshaft literally said "Fuck Work"
*(**1:56**)* - That is a new level of "Austin Powers" fuck-up right there.
This series will never be unfunny, its so good
FYI it’s not not funny
@@eugenekrabs7949 fax no printer
🐺🐧🐧🐧🎶🖤
@@eugenekrabs7949 yeah its hilarious
@@yohanesmahendra3493 eh
7:12 was that a Amish buggy towing a Caterpillar D7 on a trailer, on a fucking wooden wheels...
Looked like a 1900s-1910s era road tractor
More likely Mennonite. The Amish don't drive cars.
The old guy at the end was freaking awesome!
8:58 - This is life you cannot make this up :D Most eventfull video of them all xD
Mexico mágico 🇲🇽 😅
0:50 That's not an oil leak, that's a patented automatic chassis lubrication system. It keeps the frame of the tractor from rusting out. I guess one could assume it's an oil leak as you do have to occasionally refill the oil more often than most other tractors.
2:28 when your car goes through a mid-life crisis and does not know what its doing
The temp gauge minding its own business at 2:28 😆
2:33 a little sword fight between unequal opponents...
Honestly, that catalytic converter theft deterrent is kinda legit....
4:59 Daaang, that was the Holley SkyRam, it was a one of one made for an April fools joke that they had a giveaway for; if I remember right it's plastic, so it's probably ruined now.
Cylinder 4: "Can I come into the out now?"
Always turn your air off or put it on recirculate before going into a carwash
I love the guy who was just like hehe air bag light and then oil pressure just left
this is a re-upload, why though
Check the description.
New to me, i don't care
@@henryrollins9177 Then let’s just watch the video.
He stole his intro too
Cuz I didn’t watch it
How do you get a box truck stuck like that... I'm speechless....
For the guy under his truck that rolled away while he was changing the oil that's why he put tire chalks on
"Jeep people, i swear.."
Man, i know. While i never ziptied shit to my suspension, i did add a ton of LED bulbs, mostly to the front of my old ZJ Limited, so my directionals would blink wicked fast. I got pulled over cause of it, and i explained to the cop that all my lights work.. i just need a resistor to make them work 'normally.' He verbally told me to fix it, but i never did hahah
Everyone standing around when car catches fire 🔥 like it’s gonna put itself out lol
06:00 i like when the driveshaft popped out to say hi
5:40 What the actual f was that voice bruh? 🤣🤣🤣
1:36 the car has an automatic carpet cleaner when it enters the car wash
6:09 bruh so bad
2:34 it's like they made the tachometer into an audio VU meter...
@7:55 What did they see for them to know it was about to blow??
Usually you can hear a hizz or buzz of a sort when a tire is getting ready to kill it self.
or it can pop like popcorn when it want to kill itself
That looks like a split rim tire. More then likely the guy heard the rim pop as it was about to give way.
Split rims are by far the most dangerous things to mess with on any vehicle.
It’ll also sound like popcorn popping
1:55
How do you manage to do that?
I NEED ANSWERS 🤣🤣🤣🤣
This took place in the CBD of Sydney, Australia. It was a marketing stunt done to promote Furphy's new lager - Furphy Crisp Lager. The truck here has no engine in it and was intentionally engineered to fit in the spot between the two buildings. In one of the articles I've read, it required a team of construction workers, a crane, and two civil engineers to get that small truck into that peculiar position.
@@Aloysius458 dude the lights on the truck are on and the doors are open
I love these videos. Makes me glad we have a WOF/MOT test system here(Warrant Of Fitness/Ministry Of Transport) Every six months, it is mandatory to have your vehicle inspected at a registered garage to detect EXACTLY this kind of failure BEFORE it gets as bad as some of these are.
MOTs do pre-empt a lot of these kinds of failures, but the primary purpose of the MOT is to make sure the car is roadworthy, specifically, that it isn't dangerous to the driver or other motorists. A car with a frame rusted like Swiss cheese isn't going to pass MOT, but a car with a blown head gasket might. A car with bald tyres isn't going to pass MOT, but a car with electrical problems might.
And of course, just like state inspections in the US, you can fake an MOT as well. To its credit, the MOT does a lot as far as keeping dangerous cars off the road, which IMO is more than can be said for the US system.
2:35 when you hear the temperature gauge talk shit
Love How the Chevy's Drive shaft comes off😂but the boost though😍😍😍😍😍
That broken down Chevy guy was a hoot. 😅
Anyone else wanna see that tire "balanced" like add enough weight to the other side that it dont vibrate
They didn't even mount that tire on the machine right.
@@andrewlarson5253 funny thing about it is I work at a shop, been there over 15 years and can’t tell you how many tires a i seen fly from them doing this
@@justind9631 in my tire shop this has never happened lol, everyone makes extra sure its on right
@@lime8488 wish I worked with competent people like you have XD
@@justind9631 Wow that must be... entertaining!?!?
6:40 I bet I can tell you what is wrong with that Subaru, because mine has the same problem. You just gotta bump the key once or twice. The real fix is a whole new engine but well, that's expensive.
6:05 Im never gonna use turn signals again.
(I have a e46 bmw)
9:36 Torque and horsepower
6:02 hey is that your aluminum drive shaft or are you just happy to see me ;)
Very nice as usual! 👍👍👍
4:00 --
Get up, come on get down with the sickness!
Get up, come on get down with the sickness!
Get up, come on get down with the sickness!
3:13 Funny, but completely staged. The tech locked the wheel on without using one of the appropriate centering inserts. Probably ran the risk of throwing a $2000 machine out of calibration for his clicks.
3:22 i already know what type of wheel balancer that is. But it doesn't have the hammerhead laser on it
certified hunter engineering moment
that last one got me lol
2:45 as a Chevy guy, I can relate to this
3:53 Why paint the headlights?
4:29 Repeat after the Geico Pig to the tune of "Boots & Cats" ..."Twist and tape, and twist and tape, and twist and tape..."
“Ummmm I don’t know what to do”
Nothing. You can do nothing.
Close the vent?
@@sometimesleela5947 did you see where the water was coming in? Lol
2:27 Hondas be like
1:56 how does that even happen? that man deserves a medal for it
you got to love the low rider guys with hydralics.they'll spend 1500 for a kit to hop.but use the cheapest ball joint they can get.
😂
8:50 that's how I almost died one time
I’ve replaced a few of those eco tec engines specifically because of that happening and it’s always cylinder 1
6:25 bruhh wtfuc an old Camry in to a new coralla do they know Toyota models
Old gramps at the end wasnt having those pathetic gym muscles 😂😂
0:35 stick left the chat
Lmao
thanks for the great laugh i needed it so bad,the weather sucks ive been trapped inside for 7 days,wait im still inside,guess i will keep watching more
@ 1:36 : Titanic mode enabled 😂
the airbag light one was awesome
now, that last one is GREAT. the old guys got it.
*(**4:59**)* - Holy shit it's the Loch-NOS monster!!!! *XD*
That hoveround has some decent torque apparently.
You can go go go in a hoveround. Indoors, outdoors, all around!
4:03 sounds like kirby
6:07 yeah that and their signals are confusing AF. Took me a few days to get the hang of it
1:17
Pregnacy warning
1:55
WHAT?
Lol I read vegetarian on that dudes windshield and his engine immediately burst into flames
9:36 that ain’t your dad, that’s Zeus
6:22 just got me
1:15 This is the funniest shit I ever seen
03:14 the cone isn't even installed correctly lmao
8:43 how does this even happen
the last one got me XD
I laughed too hard at my caliper is broken part
0:51
😳😳 lets take a second to think??
I work on cars/semis/trucks/fourwheelers/tractors, basically anything with an engine. But in my 18 years on this earth i have NEVER in my entire life see a engine run while missing half of the engine. I can see a gasoline engine running, but thats a diesel it is a compression based engine, the fact that its idling on THAT, blows my mind, before you say anything, yes i know some tractors are actually gasoline powered engines, that sound like a diesel, but thats a diesel.
4:18 dude has is 2step on rowdy asf
Furphy Crisp is a beer, the driver was probably sneaking a few for himself.
5:59. I see the problem here. The Chevy identifies as a Honda.
2:00 proof that aliens built the pyramids
0:30 fastest camber slamming ever done on planet give him a world record
2:26 NICE TUNING U GOT THERE 🤪👍
O rev lag
lol third
and I love your videos!
High quality benz' welcome to benz family
00:30, when you buy the nuts and bolts at the dollar store.
2:26 when Colin McRae posses your tact.
too every ford guy just a heads up there's a reason why ford spelt backwards stands for driver returns on foot
8:30 I like to solve the puzzle:
Shity car modification