Ford Sierra Pinto Turbo
Vložit
- čas přidán 25. 11. 2011
- Ford Sierra turbo with stock 2.0 Pinto engine. Running 9-10 PSI boost. Enrichment from extra 370cc injectors set to trigger with pressure switches. Good competitor to stock Ford Sierra Cosworth :) Dynoed to 213hp/355nm @ 0.78bar boost. 100% budget project. Less money, more fun!
- Auta a dopravní prostředky
Wow nice car ! Driver seems very talented too - "a natural"... Keep up the good work!!
Great piece of budget building there!
....i bet you can have some serious fun in that!
Fantastisk! ;)
Nice to hear. Everybody should have a friend like him.
Beautiful! Job well done.
good video man !!!, a fantastic car !
Четкая тачка получилась, завидую, класс !!!
AWESOME!
No modifications on the clutch/rest of the transmission? If so, how long does the clutch last?
What turbo do you use? I am about to buy an mk1 sierra with th same engine as yours and I want to make the same thing as you, put in a turbo and stripe down the entire interior. Thank you very much.
Awesome car, do you have powersteering?
how much did it cost to build it? I really would like to know - quite inspiring
+ how much fuel does it need now? ;)
Where did you got the pressure switches? I always wanted to build a car like this.
Stock Type-9, 5-speed. Works like charm !
any changes to timing on boost? if so, how:)
@1222nap Stock ECU and ignition yes. But I build my own enricher, that's triggered with two pressure switches.
what kind of pressure switch do you use?
what fuel was it using? can u run standard unleaded?
Ser ut att gå riktigt najs!
hade ni satt dit 2 extra orginal spridare till?
hade tänkt bygga lika på min 240-88 med b230f vad tror ni?
now thats what i like .... i have a pinto 2.0 . 205 block in my vw t25 and looking to tune / upgrade it to this standards do you have any pointers on where to start first ? mybe fit efi first? all help / pointers will be appreciated . thank you .
thats class 👍👍👍
Veldig bra bygd! :) Men e85 på uåpna motor ? Da ødelegger du jo alt av pakninger
@Stianlokkeberg Japp, basic och det fungerar bra :)
could you send me how did you got the extra injectors and the pressure switch intalled?
Say around $350 USD. It ran on 352cc injectors in fuelrail, and Volvo 740 K-jet fuelpump on E85. + 2pcs 370cc extra fuel injectors. Very good ratio cost/fun :-)
Bra video forden gick trevligt ^^. En offtopic fråga vilken klocka har kamera mannen? ser fin ut :)
De två lamporna till höger, vad står dom för? Markera att extrasprutet jobbar?
are you running stock ecu and ignition? maybe there is project progress written somewhere? nice car, just need better suspension :)
asså ni är så jääävla sköna fan va bra :')
Also what turbo are you running on this ??
Well, point is that this is a budget car, "most bang for the buck" type. And pulled out 213hp from stock 100hp is good for this kid of money, even though my weld looks like shit hahaha :) Look at my other movie, of this sierra, running in the dynos.. you can clearly see how bad i welded haha! I run standalone ECU's on my other car projects, that are more serious done :)
OI! (as the instrument panel has fallen out of the cockpit)
nice :)
You are using Type9 gearbox and not MT75, right?
It stock ecu without tuning again?
Tack men nej tack! :)
did you have to lower the compression
I'm going to do the same with my cologne V6 2.4i . I don't find pressure switch...
Herlig!
6:00 "fan vad kass bil"
The differential is welded. Dynoed it to 213hp/355nm @ 0.78bar boost.
No, compression ratio is pretty low by default in Pintos. Together with E85, it's a Win Win :)
What is meant by E85?
ser riktigt skoj ut
have same sierra just without turbo in it and a bit difference is that your's is sedan and mine is estate :)
WITH GASOLINE 95 AND 98 HOW MUCH POWER ?
Hey man, nice video, watched it like 20 times already :) Did you use type9 or mt75 transmission? Also, if you ran Mt75, what flywheel/clutch? (220-240?)
THanks!
+cs Man (Mancs) Damn, 20 times! You really have to get a life mate. Original gearbox, dont know the type of it sorry! Stock flywheel with original pressure plate but a sinter disc. Happy new year!
+bestofblocket that was a fast reply haha. Yeah Im researching for my own project :) Ah to bad you dont remember the tranny, im not sure how much the Type9 can handle. Thanks again for the superfast reply, and happy New year!
+cs Man (Mancs) Look like it has a Type 9, the reverse is on the upper left. On the MT75 it's on the bottom right.
+Vixhall Yep the shifter + boot is also type 9 so it should be that! Thanks!
Goes well
Är bilen till salu? :)
Saab 9-3 / 9-5 turbo. TD04-15T
is it running again today ? No problem ?
He's a slow thinker, but he's my friend.
how did you make it run E85 please ? mine has carburetors, so i think i'll need tu upgrade it , but some says that 2.0 DOHC cant run E85
All engines can run E85, It's just a question about how much fuel you feed them.
@joululli Haha.. dunno. 101hp original.. around 180-200hp.
Visst fan är det ängelholm?
Vad gick kalaset på ? :)
hur mycket kostade det ungefär?
That manifold is exceptional. Is there anymore?? I need it to finish my project:)
I have one extra if you want
@@69censu do you still have it 😅
What gearbox?
Cant remember, but its the stock gearbox!
What is the turbo ??
e85 is a fuel type it contains 85%ethanol and 15% gasoline
de är den som ligger på blocket nu va? :D fan att man inte har några pengar :(
vad blev kostnaden på den? :D
Original pressure plate, upgraded lamel. Sinterlamel.
Hi!
Can you tell me, which type of pressure switch did you use ?
Just normal pressure switches, fully adjustable from 2-24psi. Only thing I know, it was 11 years ago 😃 the company that i bought them from is no longer active.
@joululli HB?
Ofcourse you can weld good even its a budget car...
nice from stock pinto..
IS IT reliable
Hello dear is this a car for you? I'm looking for this car's engine
rudee car mate
@wowhunterhabbo Visst fan stämmer det!
@nobbecool Det kan du hoppa upp o sätta dig på att det är! :D
Please pm me that budget items, what u use
what kind of ECU and injection are u running. im pretty sure its not standard :D
Stock ECU, read describtion for specs! :)
bestofblocket really! Im so doin this with a sierra. Wat kind of clutch u runnin a paddle clutch and also how did u get around the air flow meter :-P
*****
The airflowmeter is there for a reason if you run stock ECU. Used stock pressure plate and a sinter disc.
And one more question :-) would this little Engine take this abuse foe long :-D
+bestofblocket are the stock ecu's able to be Dyno tuned?
*My summer car be like*
eran sierra går så jävla bra och jag är ett fan av sierrer så jag gillar denna
god bless team bonnmeck
What about pistons and transmission? AFAIK the stock Type-9 transmission is not strong enough to handle this much power, MT-75 from twinkies are much more strong. I have little information on stock pistons, are they suited for this?
also which turbo model did you use?
galingong 15T turbo from Saab
bestofblocket thank you for your answer. so you've left stock pistons in?
galingong Yes. The engine was 100% stock, unopened.
bestofblocket That's rad, I'm going to try this. You've mentioned that you've used extra injectors - if I understand correctly, you've left the stock injectors in as well. Does it make sense to swap the stock ones to larger ones or is it better to leave them in and have 8? I'm going to have custom EFI anyway.
It's running on stock ECU I think.
4x4 ??
It's still alive? :P
good job u video ur sierra NOT UR SELF lol. but nice pinto spec ;)
HB?? :D
vill ha begär på denna! :D
@Strikehard92 Haha.. en Citizen :)
Is it still running?
ja ja ...
any one recommed how to turbo a 2.0 v6 cologne is there any kits avaliable
Bilal as I know of, there isnt. I’m in the same boat as you with my 2.3 Capri. Best would be to go for a pinto or a 2.8 efi / 2.9 cossie for more power
Well, you can always make your own manifold and weld everything up.
2:41 HHAHAHA
@simcaP60fan Stämmer
indeed, >14,7 is lean,
Everything ok but the suspension :))
6:26 he did die !!!!!
2:42 lol
vill ha strippensäsongen 2012 nu när jag såg den
Ai ai
Hade jag kört bensin hade hela motorn varit sönderspikad för längesen.
HB = Horse Bower but i mean Power = HP.. :D u know.. :D
6:02 whats happend? O_o
jep..165 nakit ja rattia vispaten ni saa sen linkkuu..voi jeesus
Mitä sä täälä nyt touhotat
har gaft en likadan men den ladda 1.9.... :)