Replacing Exhaust / How Many Things Will Go Wrong ?
Vložit
- čas přidán 20. 11. 2021
- Hello and welcome to another Xterra video !
Today I am trying to work on replacing my broken muffler pipes trying to remove it and put a new one in and nothing was going smooth..
But important part is to never give up ..
I hope you guys enjoy this video and might find it helpful .
Angle Grinder Tool ( a must or any other brand )
amzn.to/3cAl23X
Walker Quiet-Flow Mufflers
Part number WALKER KIT9398521
www.rockauto.com/en/moreinfo....
Truck Stuff I Use
BlueDriver Bluetooth Pro OBDII Scan Tool
amzn.to/3oYo9aE
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb
amzn.to/2WVp8PS
TOPVISION Portable Car Jump Starter
amzn.to/3BhmjrT
HIKARI Ultra 9007 LED Bulbs ( headlights )
amzn.to/3zs5mtJ
Viesyled H11H8H9 LED Fog Light
amzn.to/2Tnylyq
Xprite White/Red LED License Plate Light
amzn.to/3iz4pKi
315MHz TPMS Sensor 4-Pack
amzn.to/3tvR5rO
TPMS Relearn Tool
amzn.to/3f26LxX
All gear used to to make this video
DJI OSMO Action = amzn.to/3v21Mnb
SanDisk 128GB Extreme microSDXC = amzn.to/3v4dEF9
PGYTECH Camera Cage = amzn.to/3ehjRXJ
Saramonic SR-XM1 3.5mm = amzn.to/3gmyvzm
Dual USB-C 3.5mm Mic Adapter = amzn.to/2QERrOY
Neewer 50-In-1 Action Camera Accessory Kit = amzn.to/3tI5ySg
Neewer Battery Charger Set = amzn.to/3glcuRv
---------
Track name: ♫ Best Music Mix ♫ NCS Gaming No Copyright Music 2018 ♫ Dubstep, Future Bass, House, EDM, Trap
Music promoted by NCMFYT
Video Link: • ♫ Best Music Mix ♫ NCS...
--------- - Auta a dopravní prostředky
Didn't know Gru from despicable me does auto repair, nice 👍 thx for vid
hahahaha thats a first time hearing it but thank you ))) lol
Thanks, buddy! Going to take a crack at mine tomorrow.
Good luck man !! let me know how it will go ! ) hope you won't to have to deal with rusty bolts lol
Wow! That was a lot of work. I will never question what my exhaust shop charges again!
Ah yes the exhaust job can get out of hands pretty easy pretty quick lol
Nice work my guy! Big help as I'm about to do the same thing! Lotta rust. Great video and keep it up! Thanks!
haha no kidding right so much rust ... ( thank you very much hope yours went much better
You're a legend my guy
haha ))) dont know about that buddy but thank you )
Nice job👍 also, nice looking Xterra! About to do the same to mine! Thanks, nice video.
Thank you very much ! and good luck to you on the upgrade / fix ! hopefully it all will go easy and not as hard as it was for me ! do place come back and let me know how did it go ! )
Where did the other comments go. I left you a link to some forums regarding the y pipe and muffler. I hope CZcams didn’t pull it because it had a helpful link and also some good pricing from Xterra owners that had exhaust parts@ good prices..
Hey yes I dont know where did it go... ( I saw a bell notification for new comment but nothing was there.. youtube is strange.. you can always send me the links via Instagram @frame.it.perfect I will be more then happy to read it.. any help any useful info is always great ! thank you
@@DIY_AUTO_PHOTO I could not find @frame, but I can’t seem to make any sense of IG and don’t use it much. LOL, it just seems to confuse my old brain. LOL
@@lazerrred its ok no worries )) here is the page just incase )
instagram.com/frame.it.perfect/?hl=en
Excellent project! Thank you for sharing! My exhaust sounds loud, but no visible rust, damage or leaks. Maybe it’s how it’s suppose to sound? My buddy’s Pathfinder with the same engine idles much quieter. Is this how X’s stock exhaust tuned? Did you notice yours got quieter since the replacement?
Hey thank you for watching again !
it was "fun" project for sure.. lol so much I had to cut and drill out because of rusty bolts.. anyhow.. I do think it got quieter a little also has to do prob with the exhaust itself as its not original Nissan.. and I like it I didn't want it to be loud so when I am out in the woods camping I dont want to scare anyone .
myabe your exhouse is broken inside ? do you hear it rattle inside ?
@@DIY_AUTO_PHOTO thanks for reply! Well, I know that my cats are shot as there is intermittent rattle heard throughout (the CEL is on intermittently-p0420 and p0430- both catalysts are running below efficiency level). So as I’m preparing for cat replacements, I wonder if I should budget for the entire exhaust replacement. It seems to be loud upon cold start, once it is warmed up, it seems to idle fine. It is a little drony when lugging the engine(I know you’re not supposed to do that), like being in 4th gear at, say 35 mph. Once it is in a lower gear, the drone seems to go away. Maybe I’m just to spoiled by my GX470 whisper quiet exhaust?
I also get a whining noise from the rear end at speeds above 55mph, the whine increases under load and disappears when I back off the accelerator. Next project is to refresh the rear diff fluid to see if that improves it. Sorry for writing a novel here…
@@MaximumDIYGarage No worries ! the more information we can share and exchange the better , perhaps some people will read it and it might help them too
asto the cats need to be careful and replace them asap.. because sometimes as they brake down the small parts can be sucked back into the engine and that can make a lot of problems...
as to the exhaust yes I would say its better to replace it as well as everything will be apart anyways so just to make things easier and that way you know its all new and good
at rear diff have you looked at your breather is it still good or it is rusted ... might build up pressure there.. also good to do a rear breather mod
@@DIY_AUTO_PHOTO Yes sir! A breather mod, or at least replacement is on my list! Thank you for the advice!!!
@@MaximumDIYGarage nice ! goodluck with that project as well the good think its very cheap and easy to do
Also says 8 comments, but now there are only 3 not counting these 2 I just made.
I feel like sometimes youtube delete comments and views .. one time I lost lots of views on one video too so strange
Bro get a muffler shop to get rid of that Y pipe, make it true 2 in, 1 out with a magnaflow, Y pipe is restrictive
Hey ! would you be so kind to explain what would be and how beneficial would that be ? Thank you )
@@DIY_AUTO_PHOTO check the forums, Y pipe delete
Was that a zip-tie holding up the muffler? 🤣
😅was there ? lol at what point in the video ? remind me please )) lol
just bought a 2007 nissan xterra x sport utility 4d and seen the tailpipe is rusted off i guess
oh.. it might be still original pipe no ? time to replace it ..
@@DIY_AUTO_PHOTO Yeah I didn't see it till after I bought it lol I dont really know how to work on cars but I guess I'm gonna try what tools do you think id need?
@@devinsmith4605 if you can get a stainless exhaust that would be better it would never rust! but then again not sure how long you planning to keep the car. as for the tools well working on exhaust can be hard due to rusted bolts that need to be cut off drilled out.. I would look at them first how they look. perhaps would be easier to get it to the shop . If you haven't worked on cars before. but if you up for a challenge . I would say you might need a dril, grinder , few sockets ( depending on the blot size ) and new parts )