Video není dostupné.
Omlouváme se.
2008-2019 Challenger SR Performance Skip Shift Eliminator Review & Install
Vložit
- čas přidán 22. 09. 2019
- You paid for 6 gears why not use them all! The Skip Shift function found in all 6-speed Challengers will force the driver to shift from first to fourth gear in an effort to save fuel. This is fine, but I doubt you bought a 6-speed V8 Challenger with fuel efficiency in mind. The SR Performance Skip Shift Eliminator will do exactly what it says, it will deactivate the factory Skip Shift function so you can bang through all 6 gears with an evil grin on your face.
This SR Performance Skip Shift Eliminator features factory style connectors making it a simple plug and play installation with absolutely no cutting or splicing required. Detailed installation instructions are included.
This SR Performance Skip Shift Eliminator is designed for use on 2008-2019 Dodge Challengers equipped with the 6-Speed manual transmission. Intended for off-road use. muscle.am/2kryJL9
Shop this SR Performance Skip Shift Eliminator: muscle.am/2kryJL9
Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf
Item CH2955
----------------------------------------------------------------
Follow American Muscle for all the latest Challenger Content:
Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf
Instagram: / americanmusclechallenger
FaceBook: / americanmusclechallenger
AmericanMuscle.com has the best aftermarket parts for your Dodge Challenger: muscle.am/2ztDN5R
Shop this SR Performance Skip Shift Eliminator: muscle.am/2kryJL9
Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf
Great video and product! Might be the best $18 I’ve spent on the challenger yet
Great video. Using ramps and still in and out in under two minutes. Screwdriver tip is extremely helpful.
Thanks for watching, Dustin! -Zach
what happens if you just unplug the solenoid?
Omg I thought my transmission was failing and 2nd gear was going out, thank you for this video
Its a solenoid that gets power by the ECU its engaged at 19mph and disengaged at 21 mph pretty (much second gear ) disconnecting and capping it does the same thing as buying a NO contact wire - can also be disabled with a tuner.
I thought the whole idea with a manual transmission was.... nevermind, you know where I was going with that.
Government and companies controls what you do with your gear.
If you read the manual on page 113, 6-speed manual transmission is already equipped with 1-4 skip shift feature. This occurs when coolant is higher than 106F AND the vehicle speed is greater than 19 mph but less than 21 mph.
Right... This eliminates the skip shift feature
my solenoid release clip is facing upwards, transforming this into one of the hardest car installs.
Mine was as well. Luckily I had the transmission mount cross member off, transmission supported, doing a transmission fluid change. That made it much much easier.
what happens if you just unplug the solenoid?
I installed this today and have to say it was the best $20 I've ever spent 😎👍
Glad to hear you're happy with it! Thanks for watching! -Zach
what happens if you just unplug the solenoid?
@@hayleyandkilo🤦♂️
I looked for it in my 2009 RT auto. and I couldn't find it anywhere on the transmission.
Hi I took one of these eliminators and dissected it and came to find that the wires are actually soldered to each end as normal so how is this going to change the situation if all you're doing is reconnecting the wires when you clip them in. Please somebody answer this question for me. Basically, you just extended the wire from what I see and reconnected it to the transmission. Again please somebody answer this question for me, how is that going to stop the transmission signal???
Teach us how to put in forget internals
TIP: My solenoid release was facing upward, making it nearly impossible. Luckily I had the transmission mount cross member off, transmission supported, doing a transmission fluid change. That made it much much easier to access. So if you are planning this, factor it into a fluid change and remove the cross member with the transmission supported.
what happens if you just unplug the solenoid?
How often should I change the tranny fluid?
Theres a light on the dash when its gonna happen? Where ? Lol I haven't noticed
Same, my dash light has never come on. Guess it won’t be an issue once I install the skip shift eliminator lol
Skip shift light was removed from 2015 onward
Have have a 13 and no light for me ether. Definitely trying this
you can go into 3rd to keep it from bogging down at least my 2014 RT allows it.
I just bought a 2010 and haven’t orders this part yet but 3rd seems to be helpful
what happens if you just unplug the solenoid?
I have a '14 R/T also, and my second and third gears get gated off.
U can go to neutral then shift to 2nd to bypass this.
That’s not gonna improve slip times
I've had it happen when I was at high RPM...it just "BANGED" off 2nd / it just knocked the shifter out of my hand....
Same!!!
Arnold Gomez thank god im not the only one lol.......hitting up a dodge dealer this weekend so hard.....
This is for manual right? Not automatic
lol yes
I bought this for mine but I just wanted to let you know if you double clutch into 2nd when it wants you to skip shift it can bypass it!
oh great,
thanks for the advice,
you know a good place i can get a knee replacement?
wtf
@@hayleyandkilo you can't handle double clutching?
@@Dr.Ticklebum69 i drive a 13 speed peterbilt and i dont need to double clutch,
im not inconvieniencing myself for some EPA jew bullshit law i didnt vote for
@@hayleyandkilo so can I. Could still do it of necessary without crying about it. The EPA cares fuck all for how you feel though. Buy an automatic.
@@Dr.Ticklebum69 double clutching is stupid and its for rookies,
and since you dont seem like a rookie, why suggest it ?
also the type of people looking for a skipshift eliminateer arnt rookies to cars or shifting or anything mechanical.
That’s why mines a manual.
This only happens in manual bud.
what happens if you just unplug the solenoid?
So you have to have the car lifted in the air to do this? Or is their another way to do it?
hmmmm. i fell like this is a troll question... you are asking if you need to jack up the car to get to the transmission under the car? I mean i guess if you cant lift the car you could have the car hover while the earth retracted.
Or put it sport mode. Skips the feature altogether
Mine does it in sport mode too when I’m at a low rpm
My mopar is 8 speed, still work? Lol
This guys only going to fit the 6-speeds, sorry! -Zach
Will this void warranty?
Yes but just take it off when taking it into the dealer
Do they make this eliminator for the 5speed auto
The auto doesn't skip gears like the the manual does.
The dealership where I got my car from just told me that this will void my warranty what a crock pot of bullshyt