Mastering the JFJ Easy Pro: The Ultimate Guide! No more melted disks!
Vložit
- čas přidán 7. 06. 2023
- BUY PADS HERE
www.ebay.com/usr/johnnynathan...
In this ultimate guide, you'll learn everything you need to know about mastering the JFJ Easy Pro machine. We'll cover the basics, such as how to set up and operate the machine, as well as advanced tips and tricks for achieving the best results possible. Whether you're a beginner or a seasoned professional, this video is the definitive resource for getting the most out of your JFJ Easy Pro. From cleaning and repairing scratched discs to optimizing your workflow, we've got you covered. So sit back, relax, and let's get started on the ultimate JFJ Easy Pro guide!
#JFJEasyPro #DVDrepair #Electronicsrepair #DVDcleaning #Discrepair #Disccleaning #DIYrepair #Guide #Tutorial #HowTo #BeYourOwnTechnician #Mastering #UltimateGuide #DiscFixer #RestoreDiscs #OpticalMedia #CDrepair #DVDscratches #ScratchesBeGone #FixItYourself - Jak na to + styl
He makes more sense than majority of the JFJ advice you watch and listen to.
Thank you 👍
Thank you so much ! Got the pads in a few days ago and just did my first cd using your technique and it looks great ✊🏽 thanks from California
You’re welcome my friend!!! 👍👍
Bro thank you so much I used your tips but still used the sandpaper it came with but it still worked spraying water and the meguiar's saved my ps2 disc it reads now and no swirls either all gone looks brand new thanks to you.
Hey no problem friend, i’m really glad it helped! The sandpaper is not that important but definitely the water!
By the way if you ever have trouble with the disk reading after you polish them wash them off with some soap because the Maguires sometimes tends to leave a bit of a film.
Have a great day!
i just got my jfj in the mail. too lazy to read the manual so came on youtube. so glad i found your video. i would've been pissed for the rest of the month if i didn't. i got a bunch of spiderman games for the 360 to resurface. now im going to order all the products you mentioned. thanks!
No problem friend!!
Thinking about buying one of these...
Could use it for my personal collection (treated my discs like crap when I was a young boy)
Maybe I could start a side hustle too!
It would definitely be worth it 👍
Just picked a used one up and gad i watched your video since it did not come with a manual!!
Thank you for watching!
Thanks. I took some games and I guess they only use the buffing pad. Removed my scratches, but now there's swirl marks. 🤦🏻♂️ Barely noticable unless in direct light. I will definitely use these tips one I get my own unit.
Thanks for your comment! I hope it works out for you 👍
Ive seen some ppl put some sort of padding on the metal disc to keep it from melting the discs. Supposeely works well. Not sure what padding to use though, perhaps some rubber tape ?
I have a unit like this and have ruined a few discs. I would use the coarse 3M disc and then Meguiars over and over again... didnt use water though, that should help a lot! Thanks!
No problem
Thank you very much!
Are you not supposed to use any rubbing compound when doing the Sandpaper treatment?
Where did you find all your supplies at? Harbor freight? Also I need some of your pads… let me know when you have some in stock please 🙏
They are in stock right now on ebay, check the link in the description or go here www.ebay.com/itm/134655070141?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bqlgDs_2Rxm&sssrc=2051273&ssuid=bqlgDs_2Rxm&var=&widget_ver=artemis&media=COPY
I get supplies wherever I can really, Harbor freight carries them but they’re fairly expensive
AutoZone usually carries McGuires
What’s the brand of those sniffer pads?
The Maguires is like an wax, its meant to fill in small gaps, avoiding water for this step is best, as its meant to be left upon the disc, only surface wiped, with gaps remaining still filled to provide the optics, use/clean and reuse new pads til clean rather than water
In this case, I’m really just using the grit from Maguires polish. The wax itself seems to embed some of the grit into the scratches and cause issues with the laser.
So I’m not quite using it properly like you would with a car 👍
Hey, where can you buy those replacement foam discs? I don't see them for sale anymore on your Ebay page.
Thanks in advance!
Unfortunately, I ran out of inventory, but there should be some more in stock soon! They go very quickly 👍
Add water is right and important for fix the CDs
Thank you SO much for the advice! Will you be selling any more pads any time soon?
Yes i will have then in stock again soon!
@@JohnnyNJones WOOT. One of the few videos online I've watched where I followed the steps and it turned out significantly better than anything anywhere else
@@scottgeorgson7481 Thank you very much my friend 👍 I’m happy I’m able to help! It’s a finicky machine that took a while to figure out. I appreciate it!
Any chance of you selling the pads with the soft / coarse hercules / bauer on them?
I don’t know I’m going to think about it
I feel like people would use the Bauer pads far too often.
I haven’t been able to track down a generic pad that I can use with the sandpaper yet although I’m trying .
That meguiars compound is that a car polish ?
Yep 👍
what are the orange buff pads. I can find everything else.
I sell them on ebay www.ebay.com/itm/135050878715?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bqlgDs_2Rxm&sssrc=2051273&ssuid=bqlgDs_2Rxm&var=&widget_ver=artemis&media=COPY
questions after the finish product meaning the disc does it come our with swirls or like if it was new disc like there were no scratches
Sometimes it looks absolutely brand new and by adding enough water you can usually get it to that point.
Sometimes it has some lights swirling, but it doesn’t affect the readability of the disk. It plays just fine.
@@JohnnyNJones Awesome
Johnny, you need to find out some other good pads to sell for gamecube discs
I’m working on it, but it appears that you can also just trim the ones that I have for sale to get the same benefit.
However, if I happen to run in to any that I can supply, I will certainly do it.
As you played assassin's creed, did you face the "Can't read the disc" message while playing? Because my Watch Dogs™ did that mid-game
Not in this case no, the game was fully playable.
That occasionally will happen though!
The best way to tell if a disk will fully work is to install it to your xbox by pressing the x button on your console when you are on the “play game” option after putting in a disc
If there’s not enough information on how to do that in this comment there are plenty of guides online that can help you.
If the game does not fully install then you want to continue polishing it
Usually what happens when I notice something not installing is a deeper scratch or not enough of the buffing stage so I start with the light sandpaper again then polish it once again and usually that works fine
Do you get scratch marks on the inner ring of the disc, or is that due to improper use or worn pad? Thanks.
That’s usually caused by the nut itself some people put a piece of felt there to keep the nut from scratching the disk
But if you’re talking about the outer edge of the ring then yes that can happen just make sure you’re putting enough water because if you don’t put enough water sometimes you can get some melting happening where the particulates form together
@@JohnnyNJones Thank you for clarification. I had 5 discs resurfaced at a local retro game store. My games don't have deep scratches as you showed. More like surface ones from poor handling. I guess I would try hand polishing them or use a machine the way you did, but at home.
Are you still selling the pads? I didnt see them on your ebay
Yes, I am still selling them. I just ended up running out of stock, I will have more in a few days!
Have you got a contact email? Ive got a disc go devil unit which runs slightly differently to this but i wanted to incorporate how the jfj repairs in this unit as its way beyond discontinued and supplies dont exist for them. Would love to discuss it further to get your input.
What’s the name of the buffing pad? So I can look for it
There’s no name for it, I get them ordered in bulk from a company overseas.
I’m getting more in stock soon
I still have three sets in stock
www.ebay.com/itm/134640818211?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bqlgDs_2Rxm&sssrc=4429486&ssuid=bqlgDs_2Rxm&var=&widget_ver=artemis&media=COPY
When resurfacing some ps2 games, I followed your guide EXACTLY for sanding, however my disc doesn't look NEARLY as clean as yours when sanding down every 20 seconds with 1200 grit sandpaper. Am I doing something wrong?
I recall that there may be some difficulty with certain kinds of plastics.
I know this applied to the PlayStation one games but I’m not sure if it applies to the blue PlayStation 2 games
Make sure to check for debris on the sandpaper. Often times if you’re using Maguires compound, it will dry and drop down on the sandpaper and cause circular scratches.
You may have to spend more time using the pads.
I have played many Xbox games in which I’ve only used sandpaper without the buffing stage..
So it’s not necessary for them to look perfectly pristine, but I’m sure aesthetically it’s something you want.
I would try stepping the sandpaper up to maybe 1500 grit. It may benefit a harder plastic.
With the harder plastic, the polishing pads can’t do as much work on getting that shiny surface.
So you’ll have to increase the sandpaper grit. (that is, of course if this is a plastic issue)
Hi there. My machine is not polishing the outside ring of discs so is leaving big circles around disc, and unevenly wearing down my pads.
Any ideas?.
Make sure the spindle that holds the disk isn’t warped or wobbling.
That can happen if you leave the lid closed for a long time while there’s still a pad on the machine.
it seems to put a wobble into the spindle by putting too much pressure on one side from the pressure of the pad.
You should be able to tighten up that spring assembly
Also make sure your sandpaper is in good condition, The disk may appear not to be polished evenly but it could also be the sandpaper isn’t level enough to remove deeper scratches on the outside. These deeper scratches won’t be visible until the disc is polished.
Most likely it’s a spindle issue or you need new pads to keep constant pressure on the disk.
@@JohnnyNJones ok thanks, i'll have a look!.
I just switched to using the Hercules sandpaper and cut it to size and the swirls are more noticeable than the original. Could you suggest anything?
That tends to be the case when it’s fresh sandpaper, I usually soak it with water, run it for 10 seconds and repeat the process 3 times.
That usually takes care of the deeper scratches, also make sure to keep the sandpaper wiped clean and free from any larger pieces of dust and debris that may cause deeper scratches
Once it wears down a bit it’ll work great for you.
Personally I just have an orange pad that I use that is a little bit more abrasive than the white one and it takes care of the deeper scratches that come from a fresh piece of sandpaper
but I only have to use it once or twice until the pad is wore out enough to use the white pad alone
You can also use it several times on a blank disk if you want to hurry the process up.
Don’t worry, it’s a bit of a learning curve, spray (soak it) the sandpaper in water and run on the disk a few times to wear it down 👍
Then let me know how well it works for you.
I’ll be here for support 😃
How old is your machine? Mine started having this issue when the Velcro that holds the pads down wore out, it was caused by the pad shifting under the disc while it was spinning. I replaced the velcro and no more swirls.
@@tbroschat81 thanks for that advice 👍
What do you think about PlastX?
Maguires is the brand that makes plastx 👍
I only use that for the final polish. As it doesn’t have any grit to it, so it won’t help with the buffing.
By all means you can use for the polishing stage for sure 👍
Hi, is there a way to use other pads for 600 and 1200 sandpaper to go on top of?
I’ve tried finding riser pads for the sandpaper, and I’m still having trouble sourcing them.
Unfortunately, you might have to order stuff from JJ when it comes to sandpaper rising pads but luckily they last for a long time.
However, if I manage to figure out a way of getting the right pads for attaching sandpaper to, I will sell them
OK i fix them with a drill press instead of machine. Would a regular hard foam pad work with sandpaper glued on top?
@@pcm87 you know I thought about that myself. But I’ve never really tried it. I think you should give it a shot. 👍
Can anyone link me, tell me, or give any kind of information of the materials he's using besides the compound.
I sell the pads on ebay, right now I’m out of stock they sell really fast. But I should have some more in in a week or so.
You getting more pad back in stock soon?
Yep! Should have them very very soon!
Where you get the orange pads
I sell them on eBay 👍
Also I'm not seeing the buffing pads on your ebay store (which i saved btw), do you mind telling me where you got them? Private message is cool or if not at all i totally understand
They’ll be in stock soon. They should be here by the ninth or the 12th 👍
I can’t tell you exactly where I get them from cause it took me a very long time to find the manufacturer, but by all means, if you do enough work, you could figure it out
@JohnnyNJones Awesome! I'll definitely pick some up, thank you again 🙏
I’m looking into buying a jfj but the person doesn’t have any of the pads is there a cheaper version of the backing pad for the sandpaper?
That is one that I have not been able to track down yet despite my best efforts.
But if I happen to finally figure out how to get those, I will certainly let everyone know.
@@JohnnyNJones also do you recommend the white pads or the orange pads will work just as good?
@@corymillen9824 I recommend the orange pads because they have a bit more bite to them and work really well at removing scratches without sandpaper.
All I sell are orange pads at this point.
Course I just ran out of stock.
People buy them up so quickly. It’s hard to keep them in stock.
You have an ebay link?
Look up “jfj compatible pads” on ebay
My listing will pop up under the account name johnnynathanieljones
Great video dude! I'm having some bad luck with mine currently. Firstly, had to replace the lid as the plate stopped spinning due to crack, and now since replacing the power light (switch) turns on and lights up, but the buttons seem to have no power, not sure if it's fuse issue of sorts or the motor? What do you think buddy? Going to invest in better sanding stuff
There is a fuse it’s a little yellow button on the front panel. There’s several online selling on eBay for 50 bucks you might be able to pick one up cheap.
@@JohnnyNJones Thanks man will look into it
@@MattRPD no problem 👍
@@JohnnyNJones Sorry mate, one last thing. I'm assuming the fuse you're talking about is inside the unit, and hopefully is a simple change like for like. I'm just hoping it's not the motor
@@MattRPD It’s actually on the outside of the machine on the front if I recall correctly. Looks like a little yellow round port. There is a fuse in there
Please send jfj easy pro chile ❤
Did you get the pads at harbor fright as well ?
I picked up a pad at Harbor freight but they didn’t carry anything I needed I had to trim one down and it lasted only a week or so
I had to track down specific pads for it
The white pads last weeks
Then you can wash them out and reuse them
I sell them on eBay because I have to order huge quantities at a time the next time they’re in stock will be on the 19th
@JohnnyNJones I bought the pads off you 👍 last ditch effort before I buy a elm pro 2
@@emptychamber5565 Thank you, Well the pads will last a long time but the elm 2 is a better machine.
I am currently coming up with my own formula that’s safe and nontoxic for fixing disc surfaces and it’s working wonders
What do you use for your sanding discs? Ie what you stick the sandpaper to before it goes into the jfj
I still use the same ones that came with the JFJ they hold up well.
however they are not impossible to find. you can even use the polishing pads to hold the sandpaper if need be
@@JohnnyNJones What Thickness is the sanding Pads and is it a soft sponge foam? Thinking of using Interface Pads as in the UK there's not much adhesive sanding discs on the market.
@@grantdilworth9014 Sandpaper should do the trick 600 and 1200 grit
I’ve never heard of interfacepads but if they’re slightly abrasive they might work.
I think there’s something like an inch and a half thick but that’s just for the sponge itself the sandpaper goes on top
@@JohnnyNJones An interface pad is pretty much the sanding disc but it has the soft velcro one side and the hook velcro on the otherside. Reason I ask is I got a faulty JfJ which came with just the machine itself. Once repaired was going to get supplies and just researching for now. Trying to avoid spending $50 getting them shipped to the UK. 😅
@@grantdilworth9014 you know I will say it’s not an exact science. You have a lot of room for error as long as you don’t run the disc too long.
If you use the buffing pads and glue some sandpaper on top it should work just fine
You can even trim down foam buffing wheels.
So the Jfj comes with to hook and loop risers to put the sandpaper on. A medium open cell buffing pad and then a soft open cell foam pad for polishing
At this point I don’t even use the polishing compound I just use water
A lot of disk can be saved just with a buffing.
But if you have any access to foam i’d say cut yourself a wheel out and slap some sandpaper on there.
It’s really hard to mess up like I said unless you do it for too long without water
Take a look on AliExpress you may be able to find some stuff there to use
Where do you buy the pads?
I sell them on eBay. I’m about to get more in stock in the next week or two.
can we get new link to buy
Unfortunately I don’t have any right now I have more that are showing up in inventory soon.
When you click the link choose my name and send me a message for further details
so I was just wondering should I burn the manual if I buy one of these just wondering
Yes, and use it to heat up a tuna fish sandwich ✌️
@@JohnnyNJones damn I dont like tuna
@@commodore1979 I feel your pain, stick with Philly steak and cheese 👍
When are you going to have some more pads? I got some cheaper orange ones after foliowing your process still got scratches and disc won’t read
I should have some in the next week 👍
But they may be the same pads that you used.
Were the scratches there before you used the pads?
If so, you may have some debris on the sandpaper that’s leaving deeper scratches
I had that problem many times.
A great way of testing that is to take a blank CD R that’s perfectly unblemished and run your polishing pad on it
If there’s no scratches afterwards, then it’s most likely your sandpaper, leaving deeper scratches either from a crinkle or some debris from a previous disk
@@JohnnyNJones Hello once again Mr Jones, I have followed this video to a tee multiple times now and have fixed a handful of games, however like the comment here, I'm thinking the sandpaper debris might have scratched up another disc I resurfaced (didn't wipe it off when I gave it another 10) The disc is a PS2 game and the scratches don't look TOO deep, but the Ps2 won't read it(it tries to for a good long while, then it says cannot read disc)
Would this be salvageable or should I cut my losses and buy a new disc?
@@mr.b9613 if the scratches don’t look that deep, then you’re most likely dealing with a dead disk.
Every once in a while when you’re ordering scratched games or buying them from whatever source you’re getting them from , go ahead and try them on the console before you try to fix them.
You’ll be surprised how many of them start up and run without too many problems.
The reason I suggest this is because it gives your brain an idea of the difference between a disk that’s too scratched and what is completely ruined.
Minor scratches hell even heavy ones can still be read through enough to get to the title screen most of the time.
See the data is actually stored on the plastic and these tiny little bumps, the aluminum is only there to reflect the laser back at the sensor.
So if something’s been resurfaced too much, it can actually just destroy the data on the plastic, or if you have a scratch, that’s so deep that it hits that data layer.
And if you get a disk like that and try to resurface it to remove all the plastic down to that scratch itself then you’ll actually destroy the data on the rest of the disk that level as well.
I know this is a long reply, but the only tips I can give you is to soak it in water And give it a rub down for a few seconds, this makes sure debris is not stuck in small scratches. Maguires can make discs unreadable, which is why I recommend using water with it because it leaves a film of wax.
So give it a water bath and try it again if that doesn’t work it’s most likely just a dud my friend.
Restocking pads anytime soon?
I will have more pads in this week 👍👍
I’m also looking at getting the eyecom from the same company apparently the same machine just without the pads and stuff
Isn’t that one fairly expensive?
@@JohnnyNJones in the uk is about £100-150 cheaper
@@Callum-tm6xo Oh wow, over here the JFJ is 199 dollars.
@@JohnnyNJones like around £200 for eyecon and £400 for the pro
@@Callum-tm6xo Yeah man that’s different for sure, I hope the eyecon works well for you 👍
Looks like you are out of stock on the pads. You have any more coming? :-)
Yep send me a message on ebay and ill hook you up 👍
does the mirror layer can be fix?
Yes, but that’s a really difficult process. you’d have to a layer of aluminum and the Re coat the disk.
Usually, something like that is only done if someone doesn’t wanna lose very valuable files
@@JohnnyNJones
thanks
as a computer technician
people being me data recovery works
and some time it's cd/dvd of wedding with scratch on one or two sides of the disc
@@amir2880 there’s also some really good data recovery programs out there that can help recover at least parts of the AVI files (or whatever particular format)
Those might be useful to you as well, my friend
@@JohnnyNJones
I use some good data recovery programs
I'm trying now the Vaseline + one of them
you could have drilled a hole in the pad
I just need to know where you get the pads from? None of your sites that you had up on eBay are working anymore
www.ebay.com/itm/134743674972?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bqlgDs_2Rxm&sssrc=2051273&ssuid=bqlgDs_2Rxm&var=&widget_ver=artemis&media=COPY
Do you ship to UK ?
If you buy it on ebay it will add any extra UK postage 👍
How can I find you on eBay ?
do you have anymore buffing pads? if so can you send a new link.
www.ebay.com/usr/johnnynathanieljones
This is a link to my ebay page
When will your buffing pads be back in stock?
@@jIguess I should have them back in stock on the ninth 👍
@@JohnnyNJonesalright thank you
@@jIguess no problem
How can I do this with my hands and no machine ?
Look on my channel and you’ll find another method for doing this with nothing but a Dremel
But the same thing applies if you want to do it manually
Toothpaste and microfiber towel
Can you do a tutorial how to fix the black ps1 discs with jfj ?You can see the scratches so easy :(
I will look into it more but I think the problem that I have heard is that the ps1 discs are are too rigid and the plastic is harder to polish.
Although I think with some modification it could be done, i’ll look into it.
@@JohnnyNJones thank you sir! 👍🍻
@@svenwald9199 no problem 👍
@@svenwald9199 Check out the video I've got. You can fast forward to the end. No scratches!
@@JohnnyNJones👍excellent tips 👌 might have to give the different brands a try
The resurfacing machines I can buy in the Netherlands are way to expensive and JFJ is a pain in the ass at the customs I read at eBay. Can you tell me if the bottom spindle is motorized or the one at the lid? Or are both motorized? Maybe I can mimicking it in a sort of poor mans resurfacing machine.
The bottom is motorized the top is just a freely rotating spindle
@@JohnnyNJones Thank you for answering. It looks very heavy for just a freely rotating spindle, but as you mentioned in the video it's a very simple system.
where did you buy the orange buffing pad?
I sell them on my ebay page.
@@JohnnyNJones could you send the link please
questions so as what you mention on the vide you sad you cut the sand paper of the other brands and glue them to the sand paper pads what happens when the sand paper pads become used and you want to change the sand paper sheet how do you remove the sand paper?
@@palemonvazquez1383 I superglue them to the other sticky sandpaper pads that came with the machine.
I do not superglue them directly to the pads. 👍
If you search JFJ compatible pads on ebay you’ll find my listing. I am the only one who lists those pads on there.
@@JohnnyNJones I really appreciate it thanks for youre advice could you send the link to find the orange pads I can't find them on ebay thanks
The way you handle it when you put it in the video game, it will polish the disc until it disappears 😂
How would your recommend someone go about fixing a dreamcast game?
The problem with Dreamcast games is that they don’t have the extra layer plastic on top of the data.
Therefore, if the top of the disk gets scratched, the entire disc is ruined.
So first and foremost, I would make sure that you can actually fix the disk. You can do this by holding the disk up in front of lightbulb, and seeing if any light shows through you’ll definitely see scratches or holes if the disk is ruined.
Otherwise, if the disk has no holes in the data, you should be able to repair it like any other disk although I would recommend you do it very carefully.
Luckily, it’s the same exact size as other games that you can repair with the JFJ easy pro 👍
@@JohnnyNJones wow thanks!!! Will do that. Provided it's reparable, 10 seconds on each sand grit and some meguairs?
@@mr.b9613 try to stay away from heavy sanding, we have to be more careful with dreamcast disks because of the data layer being right under the label. We don’t want to get it too hot and we don’t want the label to rub on the metal plate so tighten down the nut.
I would go with light sanding for 10 seconds at a time and spray with water each time until it appears that the scratches are diminishing
then two minutes of buffing with the polish preferably in 30 second intervals to keep temps low and spray with water.
See if that does the trick 👍
@@JohnnyNJonesI followed your advice to a tee. Only thing is I had to go 10 seconds with the 600 grit due to 1 pesty deep scratch on the disk but did light sanding with Hercules 1500 grit for 10 seconds at a time. Kept everything after below 30 second intervals and used so much water for every one that I shrunk the ocean down about 2%. My game is back to working condition even after multiple failed restoration attempts. Thank you so much!!!!
@@mr.b9613 wow man I’m really happy for you!! to be honest I thought it may be a difficult restoration with how old Dreamcast games are.
You did a great job 👍👍👍👍
I miss my dream cast I used to love playing army men, Sarges, heroes, and Star Wars racer
Where can we get the orange pads from?
Right now I’m selling them on eBay
@@JohnnyNJones I saw the white ones, but not the orange ones. are the white ones the same?
Also curious. I use the orange pads since I was sent those instead of white. They seem to work alright, but are they okay to use with the jfj white compound / meguiars
@@Radda561 yeah, those are totally fine to use with anything 👍
They’re just a different color and slightly more firm
@@JohnnyNJones I'll have to look up your site.
I'm mad I used the manual and ruined my ps2 disc it has the swirl marks and idk if they come off.
Don’t worry they will come off, you just need a lighter sandpaper, The swirl marks them selves don’t usually cause a reading issue so don’t worry about the aesthetics but if they are causing a reading issue then you can try some lighter sandpaper or polish it for a long time.
@@JohnnyNJones Thanks i'm gonna try out your tips to see if I can save it.
Does this work for wii discs
The method should work, but you’ll need special pads and a special plate from JFJ unfortunately.
If I could source the pads, I would
@@JohnnyNJones ok I tried looking for some at harbor freight and Menards but couldn't find any
6:07 Sums my videos up lol.
Was watching the video with joy. jfj supplys are bs. You have an idea, where to buy these pads in europe/germany? ordered the machine, does like 30-40 games - nearly 2 pads of the jfjs gone.. supplys costs more then the games worth lol.
Oh I’m sorry I must’ve missed out on your comment I thought I replied to this.
I don’t know where you can get them in Europe or Germany, It would cost me quite a bit to send them but if you keep looking you might be able to find something it just takes a lot of digging it seems and trial and error
im still gonna use jfj products then ill switch machines when im more into it
Thank you! Just burned through 4 discs in a row and had enough! Heading to harbor freight right now to get the bauers pads. Again thank you so much! JFJ is a rip off company
No problem! It has a deep learning curve on it. I truly tell you it is hard to master.
And they charge way too much !
eBay store?
www.ebay.com/itm/134634780618?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bqlgDs_2Rxm&sssrc=4429486&ssuid=bqlgDs_2Rxm&var=&widget_ver=artemis&media=COPY
@@JohnnyNJonessold out?
@@dennishartinger3213Yeah I have one more pad I can post
But it’s my back up
i’ll post it now
www.ebay.com/itm/134634780618?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bqlgDs_2Rxm&sssrc=4429486&ssuid=bqlgDs_2Rxm&var=&widget_ver=artemis&media=COPY
ok you mentioned you cut the sand paper sheets in circles, then you super glue it on the sand paper pad what happens when the sand paper is all ready been used how do I apply a new sheet to the pad is it easy to remove or you glue the new sheets on to of the used one? just wanna know what advice you can give?
It seems it's not possible to buy the orange pads... he's always out of stock, and he won't say what they are or where he gets them. Does anyone know of any workable alternatives?
I have them in stock right now, the orange pads are the only ones I sell.
They may be listed as white, but they are indeed orange
There are all sorts of pads you could buy, try harbor freight.
You are right though I won’t tell anyone where I’m getting them. That’s information I worked hard for.
Why on earth did they make this thing with a metal plate that gets scalding hot? & moreover, why have they not revised this thing ovet time?
You'd think that future revisions would do away with the metal disc...
Actually, the reason they had to add the metal disc because the plastic disc couldn’t dissipate heat fast enough, so it actually was hotter than the metal one.
I don’t use any rubbing compound and i wouldn’t put anything between the disk and the metal because the reason the metal plate gets so hot is that it absorbs heat from the disk so it won’t melt.
What you can do is put some water on top of the metal plate Just spray it down and it’ll get rid of a lot of heat
@@JohnnyNJones Ah, I see. That makes sense I suppose. Maybe they should have used a bigger metal plate then?
But ya I'll definitely keep the water trick in mind. Your video has been VERY helpful!
@@skins4thewin yeah, they could definitely improve the design of the metal plate if they added some fins to it like a heat sink.
But spraying water on, it seem to work very well for me.
And keep the sanding pad, wet dispersed a lot of the heat as well.
Thank you very much, I’m glad it helped!
The warranty is useless anyway because after a year you WILL have cracks under the lid on the spring loaded arms.
Yeah I would say it’s pretty much useless 👍
Do the cracks affect the functionality of the machine or are they merely aesthetic? Is there a way to finesse the machine to reduce or eliminate the forming of these cracks or are they inevitable? Sorry for the stupid questions. Trying to determine if I should order one of these or not. Need something reliable soon.
The cracks didn’t seem to affect the functionality, until the plastic finally broke. But JFJ sells replacement pieces. 2 sets were $15 and it was a simple fix. Back up and running in no time
Your wrong. The scratches on one photo side of disk intact does effect function. The data is rite below that layer of print.
That’s for CD’s not DVD’s
DVD’s are made of two layers of plastic, one on the top and one on the bottom.
When I showed you the scratch in the video, notice that you could still see the aluminum material. That material is used to reflect the laser so it can read the data. The top side of the disk is just for looks.
CD’s on the other hand only have one layer of plastic with the reflective layer on top. When those get scratched the aluminum layer flakes off the top.
Use water and it will enter the motor. This guy is going to destroy your machine
Actually, I’ve been doing this for about a year, and I haven’t had any problems.
The machine is made to withstand moisture anyway.
I’ve let water sit in this thing for days without any problems.
Best way to use a JFJ is to first get a eco pro2
It’s a better machine sure but the eco pro 2 is way too expensive for someone who’s just repairing a few games.