Nice... my dad had that same color blue shortbed 65. It got to where it wouldn't pass inspection so he cut it in half and made a trailer out of the rear...they stopped inspections 2 yes later ,lol.
We used to have a 1965 Stepside it was a C10 3 on the column had a 350 engine and I believe or a 305 engine block I sure do love that body style I sure do miss that truck
Put some vinger down In it that will un stick it be a good ol truck get it a going usually them old trucks that had a six in them that been changed to a V8 runs good rode a many a mile in one of them like the color of that one you do some good videos you sure got a Dandy 53 man that's sharp .
Buddy i couldnt help but laugh so hard when you pulled that dipstick, no water on there, aint no oil either 😆🤣🤣🤣🤣 that was too funny 😄 and wow that bottom end 😳 so crusty
Old abandoned trucks are really on fire right now, they are all going to be scarfed up and saved, that's a good thing, lotsa videos comin, lotsa money changin hands.
Yes sir I put a Chevrolet 350 and turbo 400 combination into a 1946 GMC 11/2ton truck back in the early eighties. I acquired the engine at a storage facility because the fellow who had rented the facility was a Navy man and he was transferred and could not sell it. The engine was locked up as he had a rod backwards when he was assembling the engine. Of course. I fixed the problem and installed the engine and transmission. I had the truck stored at a friend of mine's place and I would go down and run it occasionally, Well the first time I went to run the truck the oil was milk and the only way I could figure was that the hood beings a side style with a center hinge could be rain water getting inside the engine (the engine of course was sealed up air filter on the carb and all orifices closed up) After that I would lay a cover over the engine and that problem went away. I later installed the engine into a 1972 Chevrolet four-wheel drive truck in 93 and it is still in the truck today although it is getting to the point where I will need to rebuild the engine. It is sad that people leave engines uncovered to the extent that we have this damage, and of course 283 engines are not that common anymore. They were good little engines. But even though I had this engine in the GMC complete and running (I actually drove the truck to where I had it stored) the dreaded water damage still got into it due to the hood design allowing rainwater to get into the engine (best I could figure). If I were not going down and running the truck (as well as cutting the grass around it) the engine would have been ruined.
Deffo a good idea to soak the whole engine in vinegar for about 1 _ 2 days like a coupla other guys suggested with a pan on it then the trans fluid , vinegar will eat up the rust
had the same truck back in 84 , restored as best as i could back then ,there wasnt internet ,but had to sell it because the new born needed a/c ,sure would love another ,them old trucks are war horses. i can tell you for a fact that if you kick the side ,you break bones hahahah
I love that interior color. Used to have a neighbor that had one just like it he NEVER drove so it was pretty much yard art. I kept trying to get him to sell it but he never would. Then he passed on and one of the first things his widow did was to get that truck gone. I didn't ask her about it only because I figured I should wait a while so I didn't seem like some vulture but maybe I should have asked now in hindsight. This was back in the late '80's so there wasn't any rust on it at all as it sat under a graveled carport.
I pulled a 65 long bed out of the woods in Tennessee it had been sitting since the early 90s thing had maybe 60% of it floor pans left had a old school beefed up 250 six cylinder in it with a 230 head common mod in the 70s new fuel lines fuel tank carb rebuild and all new break components had her running and driving in 2 weeks had the strongest running inline six iv ever had it had power like a 350 sbc would burn the rear tires off and pulled like a train
Stick one on cameras that hook to your phone then check out the cylinder walls in the Pistons see how stuck it is for me if it ain't bad I don't know maybe a WD-40 or a little bit of transmission fluid down each tundra that'll open help open up the valves too when it starts but if it's real bad and it's really vinegar
Ive always wanted to take a rusty motor and put it a big container of used or new motor oil for 6 months and see if it frees up!!!! Been lucky so far.. always get em unstuck
Great video ... I'm sure yiu could find a motor for the old truck ... yiu probably right about being a different hood....a lot of parts have been "liberated" in the tine in the field 👍
Look in the bed you'll see the orange park lights which on this truck are mounted to the hood so I would guess that is what is left of the original hood in the bed and the truck?!
Dang I wanted to the old Chevy running, You have neat stuff, Old Cars and Trucks. Are you able to pull the 283s out and pull the heads to see if they can be saved. Such a same folks leave the old cars like that. You take care, D
i bought a 56 plymouth last year and found the motor was stuck. sure enough when i pulled the heads three cylinders were full of water. surprisingly, the paraffin oil had protected the cylinders and there was only minor surface rust that i could wipe off with my finger! i got it unstuck and the cylinders look great. i'm currently rebuilding the heads and i plan to replace the bearings, hone cylinders and put it back together. best of all there was virtually no ring ridge at all!
I want to see update on that cuz if you can get to run without smoking like a freight train do it all stuck valves and stuff and probably a pretty good run a little motor
Is it going to rush above the windshield cuz everyone I've seen has had rust and above the windshield but if it ain't you got your deal cuz all the other stuff is just easy three on the tree I had a 63 and it was a three on the tree pretty cool
Man, I wish I could have finds like this one. That's my daily driver right there.
Love that chevy perfect body bud…65 great yr can’t wait for the magic 🪄 here to shine…👈🏾
Love them old trucks
My favorite show because of the variety of projects, engineering, and fabrication.
I absolutely love this, your a doll 😊
Nice... my dad had that same color blue shortbed 65. It got to where it wouldn't pass inspection so he cut it in half and made a trailer out of the rear...they stopped inspections 2 yes later ,lol.
Well that sucks.
We used to have a 1965 Stepside it was a C10 3 on the column had a 350 engine and I believe or a 305 engine block I sure do love that body style I sure do miss that truck
Beautiful body style this Chevrolet truck
Put some vinger down In it that will un stick it be a good ol truck get it a going usually them old trucks that had a six in them that been changed to a V8 runs good rode a many a mile in one of them like the color of that one you do some good videos you sure got a Dandy 53 man that's sharp .
Buddy i couldnt help but laugh so hard when you pulled that dipstick, no water on there, aint no oil either 😆🤣🤣🤣🤣 that was too funny 😄 and wow that bottom end 😳 so crusty
Old abandoned trucks are really on fire right now, they are all going to be scarfed up and saved, that's a good thing, lotsa videos comin, lotsa money changin hands.
Love these trucks had a 65 myself
thats some awesome "patina".
Great work in all you do keep it going
I just found your channel and I am really enjoying it. Keep up the great work!
Preshate it. Hopefully bigger and better things to come!
Yes sir I put a Chevrolet 350 and turbo 400 combination into a 1946 GMC 11/2ton truck back in the early eighties. I acquired the engine at a storage facility because the fellow who had rented the facility was a Navy man and he was transferred and could not sell it. The engine was locked up as he had a rod backwards when he was assembling the engine. Of course. I fixed the problem and installed the engine and transmission. I had the truck stored at a friend of mine's place and I would go down and run it occasionally, Well the first time I went to run the truck the oil was milk and the only way I could figure was that the hood beings a side style with a center hinge could be rain water getting inside the engine (the engine of course was sealed up air filter on the carb and all orifices closed up) After that I would lay a cover over the engine and that problem went away. I later installed the engine into a 1972 Chevrolet four-wheel drive truck in 93 and it is still in the truck today although it is getting to the point where I will need to rebuild the engine. It is sad that people leave engines uncovered to the extent that we have this damage, and of course 283 engines are not that common anymore. They were good little engines. But even though I had this engine in the GMC complete and running (I actually drove the truck to where I had it stored) the dreaded water damage still got into it due to the hood design allowing rainwater to get into the engine (best I could figure). If I were not going down and running the truck (as well as cutting the grass around it) the engine would have been ruined.
I believe I have the same truck but it is a step side fully complete. I own a scrap yard and don’t have the heart to shred it.
Deffo a good idea to soak the whole engine in vinegar for about 1 _ 2 days like a coupla other guys suggested with a pan on it then the trans fluid , vinegar will eat up the rust
had the same truck back in 84 , restored as best as i could back then ,there wasnt internet ,but had to sell it because the new born needed a/c ,sure would love another ,them old trucks are war horses.
i can tell you for a fact that if you kick the side ,you break bones hahahah
That’s a sweet truck I had a 66 fleet side 283 small window 1/2 ton same truck I really miss the ole girl
😊 thanks for the video
I love that interior color. Used to have a neighbor that had one just like it he NEVER drove so it was pretty much yard art. I kept trying to get him to sell it but he never would. Then he passed on and one of the first things his widow did was to get that truck gone. I didn't ask her about it only because I figured I should wait a while so I didn't seem like some vulture but maybe I should have asked now in hindsight. This was back in the late '80's so there wasn't any rust on it at all as it sat under a graveled carport.
I pulled a 65 long bed out of the woods in Tennessee it had been sitting since the early 90s thing had maybe 60% of it floor pans left had a old school beefed up 250 six cylinder in it with a 230 head common mod in the 70s new fuel lines fuel tank carb rebuild and all new break components had her running and driving in 2 weeks had the strongest running inline six iv ever had it had power like a 350 sbc would burn the rear tires off and pulled like a train
Good thing you get used gm 350s pretty cheap. If the head gasket went, that could have filled the cylinders with water.... or cracked head.
Stick one on cameras that hook to your phone then check out the cylinder walls in the Pistons see how stuck it is for me if it ain't bad I don't know maybe a WD-40 or a little bit of transmission fluid down each tundra that'll open help open up the valves too when it starts but if it's real bad and it's really vinegar
Ive always wanted to take a rusty motor and put it a big container of used or new motor oil for 6 months and see if it frees up!!!! Been lucky so far.. always get em unstuck
I had a 65 miss it want this truck I too live in TN
nvm don't have the 292
I think that's cool a 283 with three speed on the column best is cool
I don't blame you. The only good thing on that carcass was the frame. Better luck next time!!
Great video ... I'm sure yiu could find a motor for the old truck ... yiu probably right about being a different hood....a lot of parts have been "liberated" in the tine in the field 👍
Look in the bed you'll see the orange park lights which on this truck are mounted to the hood so I would guess that is what is left of the original hood in the bed and the truck?!
If you like it, that’s all that matters
Dang I wanted to the old Chevy running, You have neat stuff, Old Cars and Trucks. Are you able to pull the 283s out and pull the heads to see if they can be saved. Such a same folks leave the old cars like that. You take care, D
i bought a 56 plymouth last year and found the motor was stuck. sure enough when i pulled the heads three cylinders were full of water. surprisingly, the paraffin oil had protected the cylinders and there was only minor surface rust that i could wipe off with my finger! i got it unstuck and the cylinders look great. i'm currently rebuilding the heads and i plan to replace the bearings, hone cylinders and put it back together. best of all there was virtually no ring ridge at all!
I want to see update on that cuz if you can get to run without smoking like a freight train do it all stuck valves and stuff and probably a pretty good run a little motor
I had a 65 the I had a 66 great trucks
You going to look for another motor for the 65 C10, or keep it for parts, whats your plan. Thanks for the watch. Are you going to start your new shop.
Shop is coming this fall when it cools off.
Too bad, I was looking forward to another adventure.
Aceaton and type f. Always works, but I don't think anything will help that engine.
MLS is out their
12:00 I'd wager whoever owned that lived near the ocean.
I'm from Oklahoma we done knocked the inside of that thing in here through a 350 in it vortec 350 or probably a big block and been driving that mother
Bummer man have go looking for a 350
It'll run..... downhill.
C10
👍
That is a shame that wood have been a good old truck now it has to have a moter put in it
would the body/bed fit on lockjaw?
What's up
Is it going to rush above the windshield cuz everyone I've seen has had rust and above the windshield but if it ain't you got your deal cuz all the other stuff is just easy three on the tree I had a 63 and it was a three on the tree pretty cool
😬😬👍👍
What a shame, this truck was obviously owned by some real wood chucks
Hi
Just liked & subscribed. We have a number of those chevy trucks. We have tour of collection video on our channel
What happened to 65 Chevy truck
White vinegar will do wonders I am situations
That was way beyond any vinegar helping it.
Comment
Blowed head
If you have all 4 spinner center caps send them to me I can use them
Of course it'll run or you wouldn't have made a video
Should still be under warranty!!
👍