Engine flush works to clean engine! Can engine flush clean piston rings to stop oil consumption?
Vložit
- čas přidán 17. 01. 2023
- Please support this channel if you like this video
www.buymeacoffee.com/Repairve...
5 Reasons to avoid Transmission Flush • Automatic Transmission...
AMSOIL ATF for ALL Vehicles www.amsoil.com/shop/by-product... ATF amzn.to/2pwgape
Toyota ATF amzn.to/2oX3gNR
Ford AFT amzn.to/2oXa79W
Subaru ATF amzn.to/2pi817r
Nissan ATF amzn.to/2pwpDNp
GM ATF amzn.to/2pte3AA
Chrysler ATF amzn.to/2pwl19Q
Mercedes amzn.to/2pwBVFw
amsoil www.amsoil.com/shop/by-produc...
mobil 1 amzn.to/2oM6WUe
pennzoil amzn.to/2M70v7r
castrol amzn.to/2wQKFJk
valvoline amzn.to/2wT3EmG
Schaefer amzn.to/2oRggpL
motul amzn.to/2oQ4OuK
red line amzn.to/2Nsihqk
royal purple amzn.to/2oPDz3k
Best motor oil money can buy. • AMSOIL oil in harsh en...
Full synthetic vs 100% synthetic, is there a difference?? • Full synthetic vs 100%... Mobil 1 - 20,000 miles Motor Oil. 5 Facts about Mobil 1 annual protection motor oil • Mobil 1 - 20,000 miles...
Amsoil vs Mobil 1 vs pennzoil vs castrol vs valvoline vs royal purple • AMSOIL vs Mobil 1 vs p...
Does synthetic motor oil burns??? • Does synthetic motor o...
Is AMSOIL oil best motor oil??? • Is Amsoil oil best mot...
Simple way to check/replace WS ATF in TOYOTA/LEXUS • TOYOTA WS ATF simple a...
Tags; ford, chevy, gmc, dodge, ram, toyota, honda, nissan, subaru, F250, F350, sierra, canyon, denali, 2500hd, 3500hd, savana, terrain, acadia, yukon, ss, camaro, corvette, tahoe, suburban, colorado, silverado, city express, express cargo, express passenger, tundra, camry, sequoia, cummins, caterpillar, navistar, duramax, powerstroke, tacoma, mobil, valvoline, castrol, pennzoil, amsoil, havoline, shell, royal purple, liqui moly, quaker state, lucal oil, motul, peak, kendal, 6.7, international, freightliner, kenworth, volvo, peterbilt, mack trucks, western star, bmw, mercedes, sprinter, transit connect, e150, e250, e350, f150, focus, fiesta, fusion, mustang, escape, edge, flex, explore, expedition, excursion, super duty, landcruiser. U660E, AB60E, AB60F, A750F, A750E, U151F, U151E, U660F, A340E, A760E, A760F, U140F, U241E, U340E6L80, 8L90, 4L60-E, 2ML70, 4L70-E, 4L85-E, FSO2106, 6L50, 6T70, 6T40, 6T45, 9T50, 8L45, TR3160, TR6060, 10L90, MT82, 6R80, 6F35, 6F50, 6F55, 4R75E, 4R100, TorqShift, 10R80, 6R140, 6R100, P79A, M91A, B90A, B97A, PV1A, MV2A, PN3A, PN4A, E6D8, BA7A, SD9M, PB8A, 8HP45, 8HP70, W5A580, 65RFE, NSG370, AL6, 8HP50, RE0F10D, RE0F10H, RE0F10J, RE0F10E, RS6F94R, RE0F11A, RE7R01B, RE6R01A, RE5R05A, G56, 545RFE, 48RE, W5A380, 66RFE, 68RFE, AS69RC, TR580, TY758, TZ1B8, TG5D8, TR690, UB80E, P710, UA80E, A750F, A750E, U760E, UA80F, P313, AB60E, AB60F, AC60F, AC60E, RC62F, A750F, A750E, P314, U660E, U760E, C59, U341E, U151F, U151E, R155, R155F, RA60, A760E, A760F
I am independent AMSOIL dealer.
This video contains affiliate links, which means that I may receive a commission if you make a purchase. This video is not sponsored. - Auta a dopravní prostředky
Engine flush to clean engine on the inside bit.ly/3iONSEw
I have used this flush in my 2009 Toyota Camry Hybrid since 2018. I use the flush every oil change with no problems. (2-3 changes/year) This car would burn a lot of oil otherwise due to the poor piston ring design. I also use the Amsoil Upper Cylinder Lubricant every gas tank full. I think of this as my piston ring maintenance program. This is my defence against repair and vehicle replacement expense.
Thank you for sharing this information. Amsoil products cheap compared to vehicle payments.
Dear C,
I also have a 2009 Camry (2.4L) with 176k miles bought second hand, consuming some oil. Your experience gives me some security, because I read flushes could clog the piston ring pores even more. I think I will try it.
What is the function of the Amsoil Upper Cylinder Lubricant?
@@taz24787 here’s video with explanation
czcams.com/video/8rG7R2MSPn0/video.html
@@repairvehicle Thank you!! I'll take advantage that I have your attention. What do you think on the risk of obstructing more my piston pores or the VVT-i solenoid with the debris released by the Flushing?
PS Subscribed
Toyota vvt solenoids have two different designs depending on the year. With screen and without screen. If it’s has screen it’s already clogged up. If it doesn’t have screen debris is not a problem. I will send you a video where you can see Toyota solenoid without screen
I've been using BG EPR for the last three oil changes , 5000 miles ,. OCI . One more time to use as to fully clean out engine . Then back to Amsoil and Liqui-Moly engine flush , again every 5000 miles .
Love your videos and all the value you provide.
Thank you good sir
I wonder if this stuff would help clean a partially clogged oil pickup screen
It should help
Valvoline is releasing Restore & Protect motor oil shortly. It's promising complete piston cleaning in 4 oil change intervals, so figure 12,000-20,000 miles. Hope it works as advertised. A Berryman's B12 ring flush followed by Restore & Protect might be the fast tract to stop oil usage on cars that don't yet have damaged cylinder walls.
Oil consumption and decarbonizing oil rings works? How to clean oil rings without removing pistons
czcams.com/video/ussxoGWA-5I/video.html
@@repairvehicle The Berryman's B12 ring flush does, at least sometimes. I did it once on a '17 Q3 that was burning 2 qts in 400 miles with 2 cans of non-aersol B12 through the rings over 40hrs, rotating the engine with a wrench occasionally. After the flush and oil change, no oil needed to be added in 1400 miles. The oil separator was bad and changing the separator lowered the crankcase vacuum but didn't lower the oil consumption. The flush made a huge difference. I wish I had better detail but the woman who owns the car isn't reliable to show up when she says she will. You make very good videos and seem to be a very good observant guy, and I understand your doubt, but this absolutely works in some situations.
Great video! I wanted to know if you have tried Toyota's brand of engine flush? Thanks.
I have not heard of Toyota brand flush
On an non related topic , I just bought the scangauge 3 after seeing your video on it. Is there a way you can go through all the monitors/definitions of all the things it monitors ? There’s a lot that I don’t understand on it. Would love to see a detailed video on it
Absolutely yes. Give me few weeks and I will make a video with details.
@@repairvehicle sweet thanks
I’ve finally decided to use it after being on the fence on it. Used twice already and will continue to use it after each oil change or every other oil change
Was it worth it mate?
@bobha3639 update on this?
Thank you for another great video.
I have a 2000 4Runner that I purchased used. I don’t think it was well cared for by the prior owner. I’ve used the flush once but I would like to know if Is it safe to use every oil change?
According to the Amsoil it is safe to be used every oil change.
“Directions for Use
Though it works in one treatment, AMSOIL Engine and Transmission Flush is safe enough to be used at every oil change
Engine: Add entire bottle of AMSOIL Engine and Transmission Flush to engine oil fill port. Idle the engine for 10-15 minutes, then immediately drain the oil. Ensure enough time for the system to completely
drain. Remove and replace the engine oil filter. Refill engine with new engine oil in the viscosity grade recommended by the manufacturer.”
You are welcome and thank you for watching video and commenting.
Thank you.
You are welcome!
@repairvehicle something crossed my mind about these clogged oil ring issues. What if you pulled all the plugs poured a cup of the flush into the clyinders then hand cranked the engine a couple cycles to work it in the rings. Top off the cylinders off with the flush let it sit 24 to 48 hours with the spark plugs out the whole time. The evacuate the flush from the combustion chambers so you don't hydrolock. Throw the sparkplugs back In do a powerfoam and pi and flush the engine oil change filter and oil and see if oil consumption is better. What do you think?
It sounds like a good plan
@@repairvehicle one problem none of my five vehicles including my 23 year old Ram 2500 Van consume any oil so I got nothing to try it on.
It what I have in mind too, to try reduce the oil consumption. You will move the motor manually moving the belt? I saw also a video where someone put the old sparks in holes disconnected and try to start car with ignition. It not will work but will move the piston! What you think?
@@HugOCovers no leave them plugs out because you will hydrolock the engine with them in and bend piston rods valve train and with the plugs out you can safely turn the crank without damage!
Good video. Thankyou.👍
You are welcome
Thank you!
You are welcome
Can using fuel system cleaner more often help with reducing the carbon on the piston heads like this? I’m considering using those fuel system cleaner more often.
Yes
Hey mate. Could you do a video on 2 stroke amsoil for marine applications? Thanks
I will add to my list
@@repairvehicle thanks mate. And maybe the transmission oil for the outboards. Thanks again
is it necessary to flush with clean oil after using AMSOIL flush? Does the residual do any harm to bearings for examples?
Not with Amsoil flush. Amsoil flush is detergent based flush, it’s same detergent that is added to motor oil to keep engine clean but it’s concentrated. No harm to the bearings
@@repairvehicle thank you for the explanation 🙏🙏👍👍
You are welcome
Motor Medic is the best flush. Also I tried acetic acid - perfectly works
what makes it best?
I have a 2009 2arfe motor in rav4,the oil consumption is around 1qt per 300 mi,is it possible to improve oil control rings function with flushing ,also what oil would be considered detergent adequate enough to help this
How many miles on it? How often oil was changed? Is engine clean on the inside , like this czcams.com/video/L68MSBhiwAU/video.html
180,000
Oil changed 4000- 5000,strictly, still had major problems, no question oil control ring failure I think due to poor design low tension and small return holes,is there an engine replacement option ,what year if any did the industry stop doing this?
Is your engine clean on the inside like it’s shown in the video?
Yes but I noticed that the oil is getting dirty very quickly now,I've been changing the oil every 2000-3000 mi.
Have you done any videos concerning Subaru engines? Thanks
I know they have oil consumption problems due to lack of maintenance. Many people believe that because it’s newer it requires less oil change. But with fuel dilution, oil changes should be more frequent than people think because diluted oil with gasoline becomes out of specification around 3k miles or less and cause a excessive wear and build up of carbon. Direct injection is a cancer in modern engines.
Fuel dilution is normal in modern engines, makes oil go bad faster, engine oil smells like gasoline
czcams.com/video/x8Ki7r4rUMc/video.html
Would you recommend this product?
It depends for what. For cleaning engine on the inside, yes I recommend and I use it myself on my vehicle that needs cleaning due to lack of oil changes by previous owners
@@repairvehicle I have a well maintained Toyota all fluids changed so I was thinking off adding this to my oil it just hit 150k runs great
You can use, just follow directions on the bottle.
Engine: Add entire bottle of AMSOIL Engine and Transmission Flush to engine oil fill port. Idle the engine for 10-15 minutes, then immediately drain the oil. Ensure enough time for the system to completely
drain. Remove and replace the engine oil filter. Refill engine with new engine oil in the viscosity grade recommended by the manufacturer.
What's an example of a high detergent oil? Mobil 1 High Mileage? Unfortunately I don't know what oil they put in there during oil changes
The only companies that make high detergent oil is pennzoil ultra platinum and Amsoil xl and Amsoil signature series
@@repairvehicle Bc I'm figuring I could have carbon on those piston rings due t excessive oil burning. Some people bring up a piston soak. Not sure how that would work. You think just putting one of these high detergent motor oils would work?
this video has details about piston soak czcams.com/video/ussxoGWA-5I/video.html
High detergent oil works, but slowly, it dissolves sludge and carbon build up.
@@repairvehicle So how many miles should I run it for? And I never understood why the temperature of where I live matters for the second number of that oil grade (such as 5W20/30). It's the operating temperature and that temperature would be way hotter than any outside temperature
if money is very tight for you, continue to use what ever brand you are using and keep adding oil if its needed. If you have money to tried something different, you can.
What's the difference between detergent based & acid based? Does detergent based got more calcium in it like the regular oil? Can acid based damage the engine components?
Video is coming soon with explanation
@@repairvehicle Thx man you're truly an awesome guy. all respect 🙏
I’ve used Amsoil from day 1 and now have 25,000 miles with 5k intervals. Is there ever a time I should flush the engine?
What do you drive and year?
@@repairvehicle 2021 Toyota Tacoma with 25,000 miles.
It might be good idea to use it once every 3 years, if you are running your truck hard, towing, lots of traffic driving. Otherwise if it’s normal driving I don’t see any good reason for it to be used. However there’s no harm if you want to use it anyway.
How long did you run the flush in the car 30 minutes?
Answer in the video. It pays to watch video without skipping :)
folks change your oil
Сразу слышно русский акцент)
Seafoam now got 8 mpg everyday......in cold weather.......great stuff......not
8mpg on what?
@@repairvehicle Nissan truck 4 cylinder used to get 17 mpg
Thank you for sharing this
@@truth409 it made it worse??!!
@@bobh8783 When you have bad valve stem seals then yeah it might have lowered the compression It may just have to increase the oil into the combustion chamber I really don't know....