Installing the Sitech Glove Lock on the Quick Cuff Wrist System
Vložit
- čas přidán 11. 07. 2024
- How to install the SiTech Glove Lock dryglove system on the quick cuff (round replaceable) wrist seal system.
In this video we have a drysuit with the Quick Cuffs installed. We start by removing the round stiffening ring that holds in the seal.
We then put the suit side ring from the glove lock system over the quick cuff.
Then we will install our seal using the BLACK spanner ring.
We can no assemble our dryglove to our dryglove ring using the appropriate spanner (in this case the blue spanner will hold on the blue gloves)
Then we are ready to dive with them!
0:00 Intro
0:05 Remove Inner Quick Cuff Seal Retainer
0:30 Install Suit Side Ring
1:16 Install Seal
2:00 Installing glove to Dryglove Ring
3:15 How to Don and Doff the Glove Lock System
about 50 sek in... the suit ring and the suit side ring.. is that just in like that? no need for glue or somting?
The quick cuff (round wrist seal system www.diverightinscuba.com/drysuitsundiesaccessories-sitech-roundpermanentwristsystem-p-2703.html) is glued to the suit. The glove lock system isn’t glued at all
@@timsgeartips thanks :D
How do you equalize the air space between blue glove and latex seal
You can use the thumb loop on your undergarment, a piece of shock cord, coffee stirring straw, or flexible tubing
How do you change the wrist seal easily i cant get out the black ring clamping the seal
Been there done that! I normally am screaming profanities when I have to remove the black ring when a customer has glued in hd latex seals.
I wouldn’t use a screw driver or anything like that either.
I use a piece of thin wall 4” PVC pipe about 3/4” wide and slit it so I can compress it to the right size diameter and then use it to push the clamp ring out.