Ram Promaster 2014-2020 Rear Window Installation (STEP-BY-STEP) + Passenger Sliding Door / PART 1
Vložit
- čas přidán 22. 06. 2020
- Thank you for checking out my channel! Please Remember to Like, Subscribe, and TURN ON Notifications if you dig my content!
.
This is my 2018 Ram Promaster Cargo Van 1500 High Roof 136" Wheelbase that I purchased less than a month ago! DISCLAIMER*-THIS VIDEO IS NOT MEANT TO REPLACE PROFESSIONAL ADVICE.
.
I was really scared to cut holes into my brand new van during this window installation process but once I started doing it I realized how easy/simple it really was. Be patient, take your time, and enjoy the process:) These are OEM Style Windows so regardless of whether or not you have CR Laurence/AMA/etc this process should be the same thing for the most part.
.
Timestamps For Video:
-My Order Summary from Van Windows Direct [00:20-02:41]
-Rear Window Installation Process [02:42-09:43]
-Passenger Sliding Door (1/2 Slider) Window Process [09:44-End of Video]
.
PASSENGER REAR CARGO DOOR GLASS WINDOW- www.vanwindowsdirect.com/coll...
.
DRIVER SIDE REAR CARGO DOOR GLASS WINDOW-www.vanwindowsdirect.com/coll...
.
PASSENGER SLIDING DOOR SCREENED HALF-SLIDER WINDOW-www.vanwindowsdirect.com/coll...
.
URETHANE, PRIMER, MOLDING, TAPE, ETC- www.vanwindowsdirect.com/coll...
.
My Tools (Not Including What's Listed Above^)- Painters Tape, JigSaw with Fine Tooth/Metal Blade, Power Drill with Metal Bit, Acetone, Rust Inhibitor, Rubber Mallet, Ladder, eye protection/goggles, Calking Gun, Hand File.
.
My Camera Setup For This Video:
-Sony A6500 w/Canon USM 17-40mm f/2.8 with a Metabones Speedbooster Ultra
-iPhone XS
.
Find Me On Instagram @chandler.short
For Creative Collaborations or Business Inquires Please Email Me-chandlershort11@gmail.com - Krátké a kreslené filmy
Great Job!! I have four windows from VWD to install in the next week and was looking for a little encouragement. Your video helped a lot.
Awesome! This makes me happy to hear that! My best learning lesson from this was MAKE SURE YOU HAVE A SOLID JIG-SAW. (Use a "fine tooth" blade which will cut metal like butter) Good luck!
@@chandler_short ok will do!! Thanks again.
Great vid 👍
Great detail. Thanks for this.👍
Epic!!
how strong is this stuff? can you lean against the window?
I don’t lean against my windows but the windows aren’t going anywhere for a long time. Very sturdy
hi chandler, where did u source the glass?
Van Windows Direct
Thnx