The PERFECT small shop WORKBENCH
Vložit
- čas přidán 1. 07. 2022
- WORKBENCH PLANS:
scottwalsh.co/products/small-...
Full Build Article:
scottwalsh.co/blogs/shop-proj...
__________________________________
US & CANADIAN AFFILIATE LINKS
DOWELMAX 3/8" Kit:
www.dowelmax.com/product/clas...
DOWELMAX 1/2" Expansion:
www.dowelmax.com/product/dowe...
PROJECT PARTS:
22" Full Extension Drawer Slides 10 pack: geni.us/A71QAF5
Pulls/Handles: geni.us/DfgOtf
7” Front Vice: geni.us/7Ciq
10” Front Vice: geni.us/mpYgk
Adjustable Leg Leveler for Workbench: geni.us/ZzFrAo
M10 threaded inserts: geni.us/2DQT6s0
Workbench Caster kit 3", Pack of 4: geni.us/RUeZIQd
POWERTEC Quick-Release Caster Plates, 4-Pack: geni.us/EWP6
Contact Cement: geni.us/sNgiw
¼” Slot Cutter Bit: geni.us/XTlLByb
¼” Spiral Down-Cut Carbide Router Bit: geni.us/AsUJy
¼” Spiral Down-Cut Carbide Flush Trim Router Bit: geni.us/UzJ3D
Brass Router Template Bushing Guides Set: geni.us/pNSx
Router Subbase Centering Pin and Cone: geni.us/0oaBCK
20mm x ¼” Shank Router Bit: geni.us/uCX5
20mm Forstner Bit: geni.us/e7gB
Plane stop: geni.us/WNxd
Hold down clamps: lddy.no/1gpzn
Track Clamps: geni.us/dZNgfP
Side clamp: lddy.no/1gpzo
BLADES:
Table Saw Blade: lddy.no/1gj1k
Miter Saw Blade: lddy.no/1i8tz
Dado Stack: lddy.no/1g6ux
TOOLS:
Chisels: lddy.no/1g68v
Miter Gauge: geni.us/0K4H36
Dust Extractor: geni.us/ccOkLC
Drill and Driver: geni.us/qyrTiC
Circular Saw: geni.us/J5mDQ
Random Orbit Sander: geni.us/dkULx8s
Jig Saw: geni.us/i7HRN
Compact Router: geni.us/h90weiY
Cordless Router: geni.us/Jou0
Miter Saw: geni.us/uhfOe
Track Saw: geni.us/aslB
BITS:
Forstner Bits: geni.us/oj2HXU
Countersink With Stop: geni.us/cQFDp
Countersink w/o Stop: geni.us/dMiEM
Countersink Zero Flute: geni.us/fVIhcp
Self-Centering Bits: geni.us/RXZv9K3
3/32" Round Over Bit: geni.us/b8sGMT
SUPPLIES
Sandpaper: lddy.no/1hs32
Double-Sided Tape: geni.us/ZohrzD
Green Tape: geni.us/CWZquR
Glue: geni.us/4JCcR
CA Glue: geni.us/mELd05A
CA Accelerator: geni.us/bq0Az2
Silicone Glue Brush: geni.us/tiJw
INSTAGRAM:
/ scottydwalsh
MUSIC:
Epidemic Sound
Use my referral link and start your free 30-day trial:
www.epidemicsound.com/referra... - Jak na to + styl
WORKBENCH PLANS HERE: scottwalsh.co/products/small-shop-workbench
dont know how often you look at this but i didnt here you say what wood you were using. it looks great
ash
Sweet build, Scott. I really love that idea of a huge chamfer underneath the dog holes to counteract the thickness of the top. Well done!
Thanks so much Brad! It's working well so far, but we'll see how annoying the dog holes get when i start dropping things through them
@@ScottWalshWoodworking If you begin to drop things through, think about getting a cutting mat and place it over the dog holes in the area where you are say, laying out etc. It's what I've done on my MFT style top on my current bench and stops the frustration. I only expose the dog holes if and when I need to clamp.
Another idea is to route a slot for T-Track into the edge banding on the front and one side of the bench. I used Incra t-track and that allows me to use clamps on the side of the bench too.
@@ScottWalshWoodworking Do you have a link to the chamfer bit used to route the underneath of the dog holes?
How's the top holding up? Has hogging out that much of a chamfer for the dog holes led to any sort of sag? I'm about to do the same to my bench.
Also, if your plunge router has variable speed could you just put the forstner bit in it and cut with that? Or is a forstner in a router a no-no?
LoL. The last second is a perfect send off!😅
Yeah and a "send off" it might be. 🤣
I’ve watched this video a dozen times now. Been planning my workbench/ out feed table for months and I think your design is most like what I want
Just bought the plans for this, and I have to say, at first I saw the price and thought man that seems like a lot (23usd) since i didnt know what i'd actually get. Bought it anyway. Then i realized, given what went into them, it's pretty cheap. It's filled with details of how everything is put together, materials list and dimensions. Well done sir. Woodworking is one skill, making plans is another, and the time and effort you've put into both is obvious. Great work 👍
Thanks so much for the kind words!
Is the website safe? as my internet provider has it blocked, and I cannot access it.
Beautiful, nice to see a young person who relies on common sense, not what everyone else is doing. Thanks
I like that you left the spill and clean up in the vid nice to see everyone makes mistakes especially in small areas love the bench
Awesome build, Scott! Can't wait to chat with you on our podcast tonight!
thanks Eric!
You're now one of our favorite builders. Great design. Great detail on the build process. Great humor in the video. Well done!
Every woodworking man and woman needs this!
Yay! Real joinery with real dowels! Just like I learned in high school in the mid 1960's. Seriously, the new bench looks good. I also need a new one to replace the simple lumber one I slapped together about 30 years ago.
What a great video! I'm completely reorganizing my 20*9 foot shop this spring and a lot of your features are going to inspire how my outfeed table is built.
On the CZcamss.... this is a great channel!
That was one slickly done video. nice bench too.
Special congrats to your better half who clearly is a good sport.
"good sport"?
We won't know that, until the next video. 🤣
Thanks Art! She's my #1 fan
Favorite part was when you spilled the glue - I struggle with anger and frustration and I would have thrown in the towel right there. Seeing you get genuinely upset and swear but still clean it up right after... taking notes from that, such a clean workbench as well, I love the perfect 1/16 separation of every drawer!
i honestly would've walked away if I wasn't frightened of what would've happened to the cement if i didn't clean it up right away. Especially if the smell permeated through the whole house
That part at the very end literally made me spit out my drink from my nose and proceeded to search for air in-between great bouts of laughter 🤣🤣🤣 my wife would have killed me right then and there!
Jeesh, 10 x12? Kudos for putting out good work in that kind of space. I am building a 18x16, now I have no excuses left. Damn. LOL
Very nice work Scott - not just the design but the quality of finish and your video work.
Thanks for The Laugh we all make mistakes That is the Fun of all projects.
All that work and just 25 views thats really sad ,Great job man looks amazing .
129K?
336k
346k now 😮
389K!
413K
Mad carpentry and CZcams skills. Respect!
Really really beautiful build. Also simple and clever doing the large champfer for the dog holes. Solves a lot of problems with dog accessories as well as workbench stability.
That's a very smart looking workbench, utilitarian but also visual appealing.
If a bench is not utilitarian, it has no value.
Anything past utilitarian is just showing off. (just kidding) 😁
thanks Cohen!
"Screw you" earned you a subscriber.
I had an outfeed table lower than my saw. It grinds both our gears!
How this guy isn't up there with the more well worn, I mean known CZcamsrs, is beyond my understanding. Please don't be the amazing content maker and only make 6 videos and leave. Keep em coming!!
Love this build. Would love to have drawers below my workbench top but need it for small machines in my tiny space. This is the second time I have seen the Formica surface and now I want to put it on my workbench. Glad to see the steps you followed to achieve it since it will help me a tonne. Glad to see some Canadian content as well and especially local Toronto content. Keep up the videos!
Craftsman style maybe? That term hasn't been used to oblivion yet. Bench looks 👍 👌
I’ve watched lots of videos on making work benches and this is by far the best design. I’d like like to make a few of these for my garage. You can never have too much storage
I don't have a small shop but I think you're outfeed table is a great multipurpose edition to any shop, small or large. Great job!
as soon as you showed the dowel jig vs a domino joiner I was tempted to subscribe. But when the contact cement tipped ......... I bought the plans lol GREAT STUFF
Awesome Job. Loved the end.
I just found your channel.
Great videos.
I usually speed through when someone is making mundane cuts but not with you-it’s entertaining and informative.
👍 subscribed!
Never be embarrassed by your really, really, really small shop. Also, what a beauty of a bench!
Another banger from Scott. You deserve way more subs.
Thanks for the kind words Sam!
by far the best workbench project i saw on youtube. congrats
Did I just watch you use your drill press table as a positive stop on your sled??? OUTSTANDING. 😆
That's one doggone nice table saw .. I really like that method you've got of lining up the drawer slides, foolproof!
I am glad I watched until the very end ahahah that was gold XD SCREW YOU!!
Narrator: "Annnnnd we never saw him again.."
I love this build, I want to do it for my single car garage shop. I do have a suggestion for the cabinet. Build it a little smaller so you have a small gap on the sides. But, when you use the solid wood for the edges, make them large enough to fill that gap in the front. I've used this trick a lot with residential cabinets when working in a cabinet shop. You can always trim the edge to fit the space a lot easier than trying to squeeze the cabinet in
I bought a Dremel kit and started thinking of projects. First, I thought I need a workbench, was in bed last night "thinking" of a workbench on top of a linen chest in my apartment. (VERY small space.) {With drawers!!} As far as I know, I only "thought," but today, here you appear on my youtube list, like someone read my mind? Congrats to algorithm??? Ha ha ha!
I have room for a 4x8 top, a combination outfeed, assembly and Systainer storage table. Your "big honkin' chamfer" is the only real solution to a detail that was unresolved. Thank you.
I really enjoyed watching this build and hearing your thought process around each part of it. I need a new workbench and outfeed table for my garage workshop and was quite happy to settle for cheap pine and plywood screwed together but I might have to spend some time having a rethink.
Good lord that's a lot of work! But it's definitely gorgeous and amazing. Stellar job!
Ok, just 14 seconds into watching as a first-time viewer, and you're a great presenter. You got a Mark Roper vibe. Subscribed & liked.
that's a beautiful and well-thought-out table man. I think I will use this as inspiration for my bench.
I wasn’t going to subscribe, then I saw the Rush shirt.
Good job on the design, construction, and video. 👍
I got a few more in the closet still kicking around from high school that I need to put into rotation again!
DuDE! Scott this came out AWESOME! This is my 1st time watching your content. I will be back for sure!
Thanks so much Jason!
Great video, Scott! That's a really nice workbench!
Beautiful Workbench! I’m in the middle of a similar build now (planning & milling) but I’m using some pre-made drawers that I purchased for almost nothing. My biggest challenge is working the dimensions backwards. It will be a little wider and shorter then my current bench that I made from oak from my father’s farm. You did a great build and a great video. Thanks
Oof...I can imagine how you felt when you tripped over that can. I dropped a can of paint 2 days ago on my patio and even though I had a protective cloth layer underneath to catch driplets when painting it soaked through and I had to spend a lot of time on the cleanup mission. I was on a narrow timetable to finish the project before I had to leave for an appointment, so yeah...it's always fun when stuff like that happens. I was too exhausted and busy to get angry though, so I just kept going and project is in good shape now.
Nice video and workbench of course, needless to say I guess, it's obvious that it's good...but saying it anyways. =)
Dude this is one of the best videos I’ve seen on work benches. I love your funny script/commentary. Very whitty and entertaining while we all watch you work your ass off 😂. Great job 👏 and thanks for some interesting, helpful, and entertaining content!
What a beautiful and complex piece of work (art) 👍
Man been watching several of your videos and I like your humor and sass. Subbed! I will also most likely build this bench since I need a solid table for my 2 car garage workshop
Funny, entertaining and great bench. Great video Scott
I love prefinishing too :) beautiful workbench.
it's the best!
I love this guy.. the new bench is sick .. you "nailed" GOAT
"What about me?"
"...Screw you!" (begins building futon frame for couch to sleep on in garage) ;)
Great video. Just rented a small garage to start building a shop and this was very helpful. Cheers!
Nice build, Rush t-shirt puts it over the top!
Great video mate! I'm in the middle of designing my workbench and have been trying to think of what to with my dog holes to suit those clamps and there it is you have solved it thank you. What a great idea. Keep up the awesome work.
Good video. For leveling feet, I’ve bought the largest hex cap machine bolt I could find. Usually 3/4” with a washer. I bore a hole into the 4x4 corner post, thread the nut onto the bolt and then the washer bears against the wood post. Works great. Super heavy duty and when I blow out the trapped sawdust it flows around pretty well so clean up us easy.
this was so fun and interesting I watched it 3 times. You just gained another subscriber. Thanks for the vid!
Beautiful Workbench
Dude you’re really highly skilled
The grinds my gears line was hilarious totally caught me off guard haha love the build !
Great inspiration for my future workshop! Thanks for sharing this in the typical Scott fashion, with sublime camera angles, state-of-the-art editing and more humor than is good for us.
Thanks so much for the kind words as always Pete!!! You have a gift with compliments
Beautiful job, Scott.
Man of the people. Dowels and a mirka sander 🤣
A good sander is the right place to splurge. Makes sanding less dreadful.
$5k assembly table
Thoroughly enjoyed your presentation here, Scott. And *splendid* project! Very impressive. Thank you.
Really enjoyed this build so subscribed
Great video! 'What really grinds my gears', is my favorite Family Guy bit, I used to refer to it so often, I was banned from using it work! I was shocked, when in a prior video, you said folks did not use glue to build their Ikea furniture with dowels. What?!?! Really, of course you need to use glue and clamps, otherwise your furniture will come apart!
Awesome bench, amazing closing scene
Your step by step makes it look "easy", yet the final result is like "holy s#!+" professional. I now realize that I really need a table saw. Fun fact: did you know that it's basically impossible to buy a table saw in Japan? Even the Japanese tool brands that make table saws for sale in the US/CA do not sell those same table saws in Japan. I could not figure out why when I lived there. I could get every other kind of power saw, just not a table saw.
Thanks! That's wild that you cannot get a table saw? Maybe ask Ishitani where he got his 😂, although his looks very industrial
This is exactly the kind of bench I’ve been looking for! Awesome work from a small space/shop
Thanks so much Jay! I've been designing and re-iterating the plans for this bench for about three years now! I'm glad I finally committed to building it
That bench looks amazing. I wish I had the space to have a workshop. One day, maybe
Brilliant and great fun to watch... Three times actually.
Great. Another project the average DIYer can't do with their average tools. Thanks!
Just love your style of videos! I enjoy your dialog explaining your process, great stuff! I am benging on your videos today! Really enjoy the content! Thank you for posting!!!!
I don’t have a domino but I do have a biscuit joiner. I also have a extension just built to the back of my garage which will be my small shop so yea. I need a out feed . I need storage and yes I need an out feed table the same height as my table saw but here the best part. I need plans. Thank you and accept my subscription. Great video.
I have to say that is a very nice-looking bench. And also say Thank you. I have been looking at your plan prices and they are very affordable. And for a hobbyist woodworker that has not sold very much I can buy your plans and make the projects I want like this bench
Beautiful!
I just want to put in a thumbs-up for dowels. My go-to joinery, esp. for joining big boards into panels.
Awesome build and commentary!
That "screw you" really made me belly laugh thanks for that.
Love the bench, looks great. If I'm being honest I use about 20% of the dogs on my bench, so next build I'm going to do something similar but leave the middle solid and only the sides and front 2 rows as dogs. I have tidy OCD and the amount of crap and glue falling through the center is too much!
Great bench, love the humor, very entertaining.
You come across as well versed in woodworking skills. I do enjoy your channel and you do have great ideas thanks for passing along .
I'm sorry you feel that way, but you're literally the first person to say that
Great build. Near the beginning of the video you referenced using dowels rather than dominoes because you are "of the people". I, for one, appreciate that. I have a used table saw, used jointer and thickness planer, etc. Also, the ending joke is hilarious. Well done.
Glad to see you replaced your work bench. This one looks great! Really helps people with small shops realize what they also can be capable of.
I believe I may have caught a glimpse of my new baby in the back of those MDF glue ups. Let me know if you want proof of life lol.
Are you speaking of the folding trailer? 😁 I love mine
Wow Now that's a workbench!
Thanks Jesus!
Why have I just now found your channel?! Fantastic content, you are stinking hilarious!
I’m really enjoying your channel and your skills are as good as anyone else. Enjoy the self deprecating humour and I feel better about my skills when you show us your mistakes. Also enjoy seeing your partner in the odd video. Keep up the good work. Cheers.
You don’t look like your standard CZcams Woodworker but you are solid! Way to go!
That’s a fantastic build Scott!!
Thanks so much Sreevatsan!
Yay! Scotts back!
I'm BAAACK BABY!
The pickles......so good. You have inspired me to build something similar.
Nice job!
This is a fabulous build
Loved the outtro
Love your channel