Fantastic tip. Thank you so much. I arrived in Somerset 5 days ago and found that one of my motor movers was jammed. A quick viewing of the video and my motor mover was working again in seconds. Such a simple thing to do.
You are a lifesaver. Just spent 1.5 hours trying to fault find the issue then found this video... literally 2 minutes later I'm happily moving my van around again. Cheers.
Our mover failed to engage on one side when trying to leave a site in Norfolk in June. The site owner told us to try this fix, very quick, abit of pressure turning the large key and I suddenly felt everything go free. Good video because the manual with mover isn't alot if help.
This has been a great help. Tried to get my van out on the front today to wash and polish and the the motors wouldn't engage. I tried your advice and it worked... many thanks 👍
I really did not think the fix would be this easy but it seemed it would cost me nothing to try before I shelled out for an engineer. Blimey, 5 minutes and bingo, all working perfect and back into the house for a cool one and boast to the wife about what a genius mechanic she married. I'm guessing it just gets a bit stuck and a turn on the nut frees it up. I didn't have the specialist tool but a 9/32 quarter inch drive socket does the job perfect. It's been a few years since you uploaded this video, I hope you still monitor it so you will know how grateful I am for such excellent guidance. Thank you.
Great to hear it helped David. Believe it or not this is watched a lot even 4 years later. Glad it helps so many. Happy travels. Don’t forget, you are a Great Engineer. I won’t tell anyone if you don’t.
Brilliant! Ours was stuck on one side, and being 12 years old, I was convinced it was going to be more serious. Biggest job was getting the cover off 😂 Thank you so much 👍
Spent all afternoon trying to solve this after being told by my service engineer that it must be a battery problem. Been swapping batteries which made no difference. Found your brilliant you tube video and fixed it in a couple of minutes. You guys are life savers, thank you very much. Would you like to be my new service engineer, think i might have to sack the current one 👍
Thank you SO much - we had this problem on one side and your video was superb - we watched, then followed your instruction and 👍🏻 😀 Saved us from a whole lot of stress.
Thank you very much for up loading this video. I have just resolved my motor mover problems using the advice you have provided. It is a shame that the syncing problem is not covered in the operators manual because I am sure there are a lot of people must have experienced the loss of function.
Thanks for the video. Funnily I emailed Powrtouch yesterday to find out how to get the covers off so I could clean and lubricate each mover. I have the same type of Powrtouch mover as you so seeing you removing the covers come in handy. Maybe you should do a video on Powrtouch maintenance as I’ve not seen anyone do one on CZcams 👍🏻
I have just moved about 10 miles to a new house in southern Italy. The week before I moved house, my Japanese import Nissan van had a problem with the timing chain. 6 garages wouldn’t touch it, including the Nissan main dealer. The 7th garage, a small local garage without even a sign above the door had the software for Japanese market cars and diagnosed the problem straight the way. It took 3 weeks for him to fix it (he’s very good and therefore very busy) and so I hired a van. So, it came to moving my caravan and I have the same problem as you. The road to my house has a very tight turn in the drive and I could not tow my caravan straight in. I was toying with the idea of cutting a branch off an oak tree and I might just scrape in but to be safe, I was going to leave my caravan outside a friends house until I could get someone to repair the motor movers. Thanks to you two, I don’t have to now. My caravan will fit in easily without a 5 metre van in front, towing it. Now where did I put that tool, I know it’s in the caravan somewhere.🤣🤣 Brilliant stuff, thanks again.👍
Thanks so much for that. Thought to begin with that the cable had rubbed through - but NO . Two simple twists & now our offside mover actually moves again . Thanks again fir taking the time to share your findings.
Thanks , that is really useful. These movers can be a bit temperamental at times. We had one replaced under warranty and the cover would fall off as we were driving down the road. Used electrical ties so if they do come off they stay attached now and don’t litter the A38. Another tip is to switch it on and off at the battery box, that sometimes does the trick also. Thanks again
Amazingly helpful thank you so much 🙂 I have used the tool before when battery in van failed with movers engaged ON the tyres !! Manually wound the movers back. That was alot of turns ! Glad this should only be a couple of turns. Thanks again guys
This saved my trip and my sanity on Tuesday, so many hearty thanks for such a clear explanation of how it should be done. Always wondered what that T-bar was for ........ :)
My mover had the same problem. Followed these instructions and hey presto back in business. Cover was a devil to get off. Cleaned and lightly lubricated in case I have a repeat performance!
Great video, thank you very much. I was all prepped and ready to sort out my caravan mover, one side would not reverse, turned the remote on, then, without engaging the wheels, I spun them forward then reverse and a stone dropped out ....Result!
Thanks. I've been struggling to get that cover off, couldn't see a screw and reluctant to use force. Now I know it just pulls off, I can attack it with confidence!😀
Just had this issue on parents caravan while on site, worked a treat and they didn't know what that tool was for :) Great instructions but we did laugh at you repositioning yourself then the plastic cover came off, it's a tough job getting it off 😂
Thanks for the info. Got the same problem, not engaging. Going to give it a go tomorrow. Hopefully it will work. Like you the Red handle had me puzzled. Cheers David.
great video but many people turn off the remote before the cycle has finished disengaging. let the movers return then wait until the movers go forward at least 5mm they will feel loose then turn off the remote
We have power touch , Motor mover when we got our new to us van last November it did not work seemed to be no power and certainly no tool like you used any suggestions and where to get the tool from thank you 🙏
wow, when you put your tool in, you only put it in an inch or so, mine goes in about 6 in before i find the nut or screw. And mind just turns and turns without moving the mover???
I had something similar when going away for the first time in months.....couldn't get anything to happen and just when I was driving out the storage yard to get new batteries for the remote it come to me..... turn the bloody main isolator on to the motor mover.
Thanks for your help this weekend, I was just about to launch the remote into outer space and kick the cr@p out of the motor mover when I found this video. I was wondering what the T handle was for 🤔
Please advice, my lefthand Powrthouch motor is not engaging. However it dis-engage if I engage it manually with every try. I reset it as per your video but still not working.
Hola muchas gracias, yo tengo unos de los primeros Powrtouch que los trajo a España, un señor ingles, me ha dado un resultado maravilloso y se me acaba de romper la centralita me gustaría saber el correo electrónico de la empresa que los fabrica si alguno de ustedes lo sabe, para ponerme en contacto con ellos. Muchas gracias
Hola muchas gracias, yo tengo unos de los primeros Powrtouch que los trajo a España, un señor ingles, me ha dado un resultado maravilloso y se me acaba de romper la centralita me gustaría saber el correo electrónico de la empresa que los fabrica si alguno de ustedes lo sabe, para ponerme en contacto con ellos ya que aquí en España no encuentro servicio técnico ni distribuidores. Muchas gracias
Fantastic tip. Thank you so much. I arrived in Somerset 5 days ago and found that one of my motor movers was jammed. A quick viewing of the video and my motor mover was working again in seconds. Such a simple thing to do.
Glad it helped
Brilliant had me stumped! took less than two minutes to sort out.
So glad it helped.
You are a lifesaver. Just spent 1.5 hours trying to fault find the issue then found this video... literally 2 minutes later I'm happily moving my van around again. Cheers.
Jason. So glad it helped. Little things like this make caravaning a little tyke easier.
Our mover failed to engage on one side when trying to leave a site in Norfolk in June. The site owner told us to try this fix, very quick, abit of pressure turning the large key and I suddenly felt everything go free. Good video because the manual with mover isn't alot if help.
This has been a great help. Tried to get my van out on the front today to wash and polish and the the motors wouldn't engage. I tried your advice and it worked... many thanks 👍
What would we do without you tube eh? Glad it helped.
I really did not think the fix would be this easy but it seemed it would cost me nothing to try before I shelled out for an engineer.
Blimey, 5 minutes and bingo, all working perfect and back into the house for a cool one and boast to the wife about what a genius mechanic she married.
I'm guessing it just gets a bit stuck and a turn on the nut frees it up.
I didn't have the specialist tool but a 9/32 quarter inch drive socket does the job perfect.
It's been a few years since you uploaded this video, I hope you still monitor it so you will know how grateful I am for such excellent guidance. Thank you.
Great to hear it helped David. Believe it or not this is watched a lot even 4 years later. Glad it helps so many. Happy travels. Don’t forget, you are a Great Engineer. I won’t tell anyone if you don’t.
Brilliant! Ours was stuck on one side, and being 12 years old, I was convinced it was going to be more serious. Biggest job was getting the cover off 😂 Thank you so much 👍
Yep. That cover can stick but don’t you feel good when you’ve fixed it. Well done.
Spent all afternoon trying to solve this after being told by my service engineer that it must be a battery problem. Been swapping batteries which made no difference. Found your brilliant you tube video and fixed it in a couple of minutes. You guys are life savers, thank you very much. Would you like to be my new service engineer, think i might have to sack the current one 👍
Really glad it helped. Happy travels.
Thank you SO much - we had this problem on one side and your video was superb - we watched, then followed your instruction and 👍🏻 😀 Saved us from a whole lot of stress.
Thank you very much for up loading this video. I have just resolved my motor mover problems using the advice you have provided. It is a shame that the syncing problem is not covered in the operators manual because I am sure there are a lot of people must have experienced the loss of function.
Absolute life saver of a video. Almost gave up and booked into get repaired. Simple fix once you know how.
Great video, have this problem on one side, will looking at the van next few days. Fingers crossed 🤞.
I am sure it will work. Good luck.
Thanks for the video. Funnily I emailed Powrtouch yesterday to find out how to get the covers off so I could clean and lubricate each mover. I have the same type of Powrtouch mover as you so seeing you removing the covers come in handy. Maybe you should do a video on Powrtouch maintenance as I’ve not seen anyone do one on CZcams 👍🏻
Glad i could help, always good to see what others are doing. Enjoy your caravan and stay safe.
I have just moved about 10 miles to a new house in southern Italy. The week before I moved house, my Japanese import Nissan van had a problem with the timing chain. 6 garages wouldn’t touch it, including the Nissan main dealer. The 7th garage, a small local garage without even a sign above the door had the software for Japanese market cars and diagnosed the problem straight the way. It took 3 weeks for him to fix it (he’s very good and therefore very busy) and so I hired a van. So, it came to moving my caravan and I have the same problem as you. The road to my house has a very tight turn in the drive and I could not tow my caravan straight in. I was toying with the idea of cutting a branch off an oak tree and I might just scrape in but to be safe, I was going to leave my caravan outside a friends house until I could get someone to repair the motor movers. Thanks to you two, I don’t have to now. My caravan will fit in easily without a 5 metre van in front, towing it. Now where did I put that tool, I know it’s in the caravan somewhere.🤣🤣 Brilliant stuff, thanks again.👍
Thanks so much for that. Thought to begin with that the cable had rubbed through - but NO . Two simple twists & now our offside mover actually moves again .
Thanks again fir taking the time to share your findings.
Thanks , that is really useful. These movers can be a bit temperamental at times. We had one replaced under warranty and the cover would fall off as we were driving down the road. Used electrical ties so if they do come off they stay attached now and don’t litter the A38. Another tip is to switch it on and off at the battery box, that sometimes does the trick also. Thanks again
Simon Bailey good advice. Thanks for that. Stay safe and hope you enjoy the rest of the summer.
Thank you guys I've been trying for hours..... You just saved our trip 👍👍👍
Hi Mr & Mrs T.
A new subscriber and a caravan newbie. Love your vlogs and tips.
Thanks for making and sharing them.
Thanks for subbing! Xx
Another highly satisfied customer!!! Brilliant video, saved our holiday thank you very much
Happy holidays!
Brilliant, thank you so much for this. I was about to strip the electrics to try and find a fault. Always wondered what that tool was for!! 😊
Perfect! Simply explained and simple to sort!
Thank you!
Amazingly helpful thank you so much 🙂 I have used the tool before when battery in van failed with movers engaged ON the tyres !! Manually wound the movers back. That was alot of turns ! Glad this should only be a couple of turns. Thanks again guys
Great thanks for your help. Excellent quick, clear and consise instructions.
You've made our day, now we're off. Xx
Awesome jobs folks - first video I came across after eliminating anything obvious and worked perfectly- Thank You!!
This saved my trip and my sanity on Tuesday, so many hearty thanks for such a clear explanation of how it should be done. Always wondered what that T-bar was for ........ :)
My mover had the same problem. Followed these instructions and hey presto back in business. Cover was a devil to get off. Cleaned and lightly lubricated in case I have a repeat performance!
Trevor Cowley glad it was of some help. Thanks for letting us know. Stay safe.
Wonderful video. Well worth watching, a simple 'GoTo' in your Knowledge Toolbox. Many thanks. Cheers from Michael. Australia
Thanks for taking time to upload 👍🏼
Thank you for this. Exactly the same issue since lock down :) I didn’t have the tool but found a 7mm socket on a thin extension bar fitted mine.
Great video, thank you very much. I was all prepped and ready to sort out my caravan mover, one side would not reverse, turned the remote on, then, without engaging the wheels, I spun them forward then reverse and a stone dropped out ....Result!
Great to hear it helped.
Thanks. I've been struggling to get that cover off, couldn't see a screw and reluctant to use force. Now I know it just pulls off, I can attack it with confidence!😀
Thanks so much for this - we were stumped until I found your video!
I am glad it helped. Happy camping. Stay safe.
Just had this issue on parents caravan while on site, worked a treat and they didn't know what that tool was for :)
Great instructions but we did laugh at you repositioning yourself then the plastic cover came off, it's a tough job getting it off 😂
Glad it worked. Thanks for letting us know.
Thanks for the info. Got the same problem, not engaging. Going to give it a go tomorrow. Hopefully it will work. Like you the Red handle had me puzzled. Cheers David.
Used this yesterday and it worked thank you very much.
Glad it helped. Nothing worse than not knowing what to do. Thanks for letting us know. Happy caravanning. Stay safe.
Bloody fantastic!! Problem solved! Can’t thank you enough ❤
Just used this to sort my movers. Thank you. 👍🏻
Love this vlog. Thank you very much 👍🏻😀
Thanks for the comment really appreciate it. Happy Caravaning and stay safe.
Amazing clear instructions. Thank you so much.
Thank you so much for sharing this.
I assumed it was a battery issue but glad I googled this!
Glad I could help! X
great video but many people turn off the remote before the cycle has finished disengaging. let the movers return then wait until the movers go forward at least 5mm they will feel loose then turn off the remote
Thanks a million, this fixed and sorted out my issue😀
Awesome, thanks for the vid, worked first time.
Thanks for your excellent work, life saver.
Glad it helped. Thanks for letting us know.
Problem solved for us too. So relieved. Thank you.
Glad it helped!
Thanks very much for the tip described,helped me out today,and solution was exactly as you said.
Please tell us what the tool is you used to tension it, please
Hi Guys . Like you i had the same problem and i also used Dan's vlog to get mine going again lol..... great video 😎👍
Paul and Sarah Caravan life I don’t know what we would do without each other’s help. Thanks for watching and stay safe. ✔️
Thank you. Great tip that saved our bacon.
Thank you so much your video was a life saver 😊
Glad it helped. It’s little things like this that make a difference. Thanks for the feed back and stay safe.
Spot on that got me going again 👍 thanks
Really glad it could help. Happy camping.
Great - that solved my problem :-) you need to stop Mrs C interrupting you though
Thanks so much your a legend I was pulling my hair out 👍
Glad it helped. Nothing like the feeling of not knowing what to do.
Fantastic worked a treat thanks
Ha it worked! Thanks! Didn't think it would.....Thanks
We have power touch ,
Motor mover when we got our new to us van last November it did not work seemed to be no power and certainly no tool like you used any suggestions and where to get the tool from thank you 🙏
Lovely,,but how do you adjust the gap between roller and tyre…? As mines slipping on drive.
Many thanks, this does the job!
You're welcome! So glad it helped.
Great info, can you tell me what size socket you used to turn it forward pls.
Hi Steve. Sorry I have no idea. It is a tool that comes with the motor mover.
I think I have found out what size it is 7mm.
Just had same problem going to fix it now 👍
Good to hear. Glad it helped.
@@Tintenter problem sorted in 10 mins with thanks to you 👍
Saved to my caravan PlayStation brilliant thanks
Glad it helped. Safe travels.
wow, when you put your tool in, you only put it in an inch or so, mine goes in about 6 in before i find the nut or screw. And mind just turns and turns without moving the mover???
I had something similar when going away for the first time in months.....couldn't get anything to happen and just when I was driving out the storage yard to get new batteries for the remote it come to me..... turn the bloody main isolator on to the motor mover.
I know, little things like this can be a real pain. Glad you got it sorted. Thanks for watching and stay safe.
Hello. I have a similar problem, but on aa manual Reich basic mover.
I also have on top l, not a screw, but a nut. Could it be the same problem?
Thank you so much for this video... lifesaver
You're welcome!
Thanks for your help this weekend, I was just about to launch the remote into outer space and kick the cr@p out of the motor mover when I found this video.
I was wondering what the T handle was for 🤔
Thanks for the video
Our pleasure!
Please advice, my lefthand Powrthouch motor is not engaging. However it dis-engage if I engage it manually with every try. I reset it as per your video but still not working.
Does anyone know what size socket this is? 10mm, 12mm, 14mm etc?
Our 2nd hand van has these fitted but not tee wrench?
I'll order one up.
Thanks.
I have this problem on one side but I don't have the tool is there anything else I could use.
Hi All can you help, just bought a power touch evolution remote control, does anyone know how to sync it?
Many thanks, if this happens to us we are ready, bring it on 🤟
It’s always good to have a plan. ✔️
You will find it much easier to remove the cover if you remove the 3 rubber bungs on the side as they spread the plastic .
Genius ta
Does it really need the lady keep interrupting?
Gratitude is a very under-rated quality
👍
Hola muchas gracias, yo tengo unos de los primeros Powrtouch que los trajo a España, un señor ingles, me ha dado un resultado maravilloso y se me acaba de romper la centralita me gustaría saber el correo electrónico de la empresa que los fabrica si alguno de ustedes lo sabe, para ponerme en contacto con ellos. Muchas gracias
Would be so helpful if there was only one person speaking
Tell the lady to stop interrupting! Annoying
Hola muchas gracias, yo tengo unos de los primeros Powrtouch que los trajo a España, un señor ingles, me ha dado un resultado maravilloso y se me acaba de romper la centralita me gustaría saber el correo electrónico de la empresa que los fabrica si alguno de ustedes lo sabe, para ponerme en contacto con ellos ya que aquí en España no encuentro servicio técnico ni distribuidores. Muchas gracias