How to setup HAM IT UP Upconverter by NooElec with SDR Sharp and CubicSDR
Vložit
- čas přidán 11. 09. 2024
- TechMinds Amazon Shop
US: www.amazon.com...
UK: www.amazon.co....
If you enjoyed this video please help me out by subscribing, thank you so much, Matt
My Patreon here: / techminds
My Paypal here : www.paypal.me/...
Here I go through configuring SDR Sharp and Cubic SDR for use with the Ham it up Upconverter by NooElec.
Download the Zadig Winusb Driver installer here: goo.gl/Xx1cDj
Download SDR Sharp here: goo.gl/RDgP1a
Download CubicSDR here: goo.gl/mrdTZk
NooElec Ham it up: goo.gl/NLuDU1
Thank you! I was about to shell out the best part of 450 quid on a Whistler TRX 1E - you've saved me about £350! Awesome, thank you! Amazon, here I come...
You’re welcome!
The SDRPlay devices are the best!
@@TechMindsOfficial Thank you, so much! I hope to have a lot of fun and I can't wait for it to be delivered. 😄
@@TechMindsOfficial 😁
@@TechMindsOfficial Haha I just bought the nooelec smart xtr with ham it up plus bundle.
Right after that I started learning about the rsp play DX which sounds like a much better unit that does the same thing I bought the nooelec for only better for about the same price.
Well I'll see how this does, maybe I'll return it and get the rspdx.
Thank you.
Thanks
I'm excited about using my ham it up can't wait
Great overview! Keep em coming!
I like the radio station you selected very cool.
Great informative videos, thanks. You mentioned we should ask if there's any items we would like to see... any chance you can do a vid on how to set this up on a Mac...? Would be great of you copuld, thanks.
hello can anyone help me with the settings i keep puting in -125.000.000 and it keeps going back to and dos not lock
hi Great Video ! just getting into this after being off the recievers for three years i take it i can use this with windows 10 or 11?
How did you change your SDR# view to show such a WIDE range of frequencies!?
Thank you! How to transmit a signal at 100kHz using Hackrf and Upconverter?
5:45 Helpful instructions only ONE STEP was missing. The device still doesn't show up for me until I run the BAT file found in the SDR Sharp top directory. W/o doing that, no device appears.
Thanks
Great video
4:39 (Now I'm going to open up SDR Sharp) Ahhhh OK and where exactly did you do that?
cubic is pretty flaky on my linux box. otherwise thanks for telling us about the shift / offset thing. -125mhz good to know.
THANK YOU
It's alot of work what are the benefits compared to RTl sdr v3/4
A V3 doesn't work too well on HF on it's own. You can use Q branch, but just not as good as an upconverter.
A newbie guy but i have one simple Question- how does the ham it up converter receive its power source from..
Ahh yes, I’m not sure if I covered that properly in the video but the Ham It Up has its own USB cable which plugs into a PC or usb charger for its power source. So you need two usb cables, one for the sdr and one for ham it up.
ahh that's it.. i see now 5+ plugs in the other usb port /side of the Converter.. excellent video by the way..very helpful for us sdr beginners guys..
My sdrsharp does not HAVE a source function above Radio. ???
Hi, i am thinking of getting a ham it up converter. Is there much of an advantage going with an upconvertor vs using direct sampling on the rtl-sdr v3 ? Thx
Oh yeah I got the same thing
Are you picking up the signals with that small antenna or any external antenna is used.
The driver will not install in Windows 10 unless in Zadig you click Options, and UNSELECT Ignore Hubs or Composite Parents, and then list all Devices again if necessary, and then use TL2838UHIDIR as the device you are trying to install. Then the driver will install correctly. Then go make sure SDR sharp recognizes the device go to SDR sharp directory and run the install-rtlsdr.bat file by double clicking on that, then go into SDR sharp and choose RTL-SDR USB as the source. Then it'll work with the play button as usual.
Thank you very much sir, this is exactly what people should do, I've then be able to use the software with these steps. Thanks again!
@@ummite No problem at all. I'm glad it worked for you. Have fun with your SDR. :)
So far I can listen to FM and the weather station (162.55 Mhz) not anything else. Wondering if its my antenna, my location, software configuration or what? I am using the Nooelec blue dongle (mini2+?) and the basic antenna that came with it... I am waiting for my more potent package to come in with a Ham it up receiver...
Bizarre on the website the sdrsharp is not compatible . itried several time and on the whell the device do not appear. so i can not use it with sdrsharp.Thank you
I've got the nesdr smartxtr and ham it up nano and shouldn't the nesdr power the ham it up?
Thanks for this series of tutorials. Very helpful. I wondered if you had any thoughts on the HF reception performance? For example, compared to a traditional comms receiver? I am tempted to get one of these bundles and, while, I don't expect HF reception to be as good as amateur HF receivers/transceivers, I was curious to know if the performance was reasonable.
It’s all about filtering and rejection. For the price, and as a start into SDR a ham it up with an SDR would be a great starter. For something comparable to a dedicated receiver, then an RSPdx from SDRPlay or the Airspy HF+ would be recommenced. Hope that helps.
Yes, that is helpful and thanks for reply.
I decided to order the NooElec SDR HF bundle as I wanted just a basic HF/VHF/SDR for measuring VDSL2 interference. Also thought it would be a useful panadator for monitoring my HF/VHF/UHF transmissions.
thank you
Hi new sdr can i use the Ham It Up RF Upconverter with any SDR dongle , many thanks
thanks
Hi what is the link for the SDR software
Can the balun be used with an AM loop antenna?
Vangelis and Jon Anderson on Shortwave who would have guessed that.
Does the ham transmit?
Great video thanks! Please could you advise as to what kind of wire to use for the 2m lengths that go in to the balun? I can't find any reference on the net for this, can it be standard coaxial cable (RG-58) or something else??
To be honest the longer the better, I used 15m wire and it was just 1mm bell wire. Copper
Temporal Space Club late comment but definitely not coax, use something like speaker wires that are not shielded. The point is that shielding protects from RF, which is the opposite of what you want in an antenna.
@@TechMindsOfficial
Hello, and what was the opposite to ground, right or left? It had the same distance as the active cable, thanks
Is there an efficient way of doing this on a Mac or Linux computer? Thanks.
Thank you@Kieran Davies. This is great.
oh yeah I almost got i got one them now I just to figure out how to.connet it to my laptop
do you need drivers for hackrf one?
Ive reloaded the driver, device manager says it is working and best driver.
Selection on rtlsdr controller tab shows no selection at all, its invisible. advise?
You have to use the ZaDig driver installation program to install the correct driver for your SDR receiver. Which SDR do you have?
I have the same problem, i have rtl_sdr receiver r820t2 (one with dolphine on it), in zadig it shoved and the driver inastallation was successful but in sdr sharp it doesnt show.....
I found answer in on other comment...run the bat file
@@jakobkatrasnik8684 thank u
Is this on Amateur Radio band? There should not be music. Could it be CubicSDR just is not working for this band?
Craig W7CDP - Can't get the SDRSharp software to fire up. I keep getting a popup that I need to load the .NET software which I have loaded about 3 times. After doing so, it still pops up and won't let me go beyond. I have a 64 windows 10 machine. What an I doing wrong?
Mine does the same frickin thing
This video has been very helpful. I now have the sdr dongle plus Ham It Up. I get very weak signals and lots of noise which I think is from the pc . I'm very disappointed! Suggestions?
Hey Bob, I would definitely say this is to do with your antenna. Please let me know what type of antenna you are using for HF, below 30Mhz
I'm using two lengths of copper wire about ten feet long each into the balun as a dipole. I tried the same arrangment into my HF receiver with no problem. I think that it's noise from the PC. I'm going to try it with my laptop outside in the garden to see if the noise is coming from somewhere in the house. Cheers.
Use a USB cable with ferrites.
I'm having a little bit of trouble getting this to work in SDRsharp. even after I install the driver using Zadig I am unable to find my device in the configure source button. When I click on the configure source button there is no option to select other devices it is grayed out. Do you know where my issue might be coming from?
Thanks
i am having the same problem, have you resolved it?
Obi Okonkwo , I borrowed an rtl-sdr v.3 from a friend and SDR sharp recognized that dongle. I also followed the installation instructions from rtl-sdr.com
Will I be able to find anything with your setup but only an ANT500 antenna??
Sure, but it would only be good for vhf and upwards. Range would be diminished compared to an outside antenna.
Great video! Can I use SDR UNO software with this package?
Yes, you have to use the IO DLL version.
NESDR Smart XTR SDR
hallo how i can make own rtl sdr
i have the latest nooelec doggle and ham it up. converter and use cubesdr. have -125mhz offset and highlighted rtl and hit start. all i get is noise.
the rf in goes to an outside 2 element 40 mt yagi at 70 ft. seems like i should be hearing something.
Do you mean CubicSDR? Also, what’s frequencies have you tried listening to? I presume around 7.1mhz lsb? Also make sure that the switch on the ham it up is NOT on pass through.
I have a switch that i can switch in my 160 meter inverted L ant or the 40 meter beam or my 4 element quad. and sorry type-0 CUBICSDR software. ham it up is switched in. not bypassed. can pick up 2 of 3 local am stations. but nothing on 160 80 or 40 meters cw or ssb. i have been a ham since 1962 , so it is hooked up right. i check out the videos on here and the guys are coping a ton of signals. but i am not hearing any. i also have the 9:1 balun going to rg 58 coax to the antenna switch. and have tried it with and without the balun. maybe i have something in the software wrong. thanks Tony WA4JQS
when i enable the SHIFT it won’t let me tune below 124 mhz.. and on my drop down menu it only shows GENERIC RTL
Go the other way with the shift. If it was -125MHZ then select +125MHZ.
Do you connect the output of ham it up with the input of the antenna of hackrf one?
Can i use this on a older acer chromebook ?
Depends what OS you have installed. I’m personally not aware of any SDR software for chromebook, but some might exist. I do have a chromebook some where so I’ll check
@@TechMindsOfficial Thanks for quick reply . I just updated to this
Version 80.0.3987.137 (Official Build) (64-bit)
@@kanibis420 The only software I've found for chrome OS is called Radio Receiver and its more of a browser plugin , I would love an app like SDRTouch that worked on chrome OS.
It is strange that the 'Ham it up - Plus" is actually cheaper 🤔 by itself on Amazon then it is in any form on eBay. I already have several SDR dongles and it costs more to buy the bundle.
I noticed you didn't plug in the USB on the Ham it up upverter. Any reason for this?
Is it for power electricity?
Many things are unclear about all this and the frustration factor is high. Here are 4 questions:
what setting should I use - FM, NFM, AM', USB, etc...???
Also, what is the effect of bandwidth (2,56 vs others?)
How do I listen to airplanes to tower chatter?
How do I listen to digital channels?
Tried it again with another PC following exact details presented. NOOELEC ham it up does not work under any circumstance. Total POS. I'm buying an ICOM.
Unable to down load your version of Zadig driver install. This one is for a Blue tooth Camera . LOL Pull down is nothing like the one in this video.
I wish Nooelec would get a little more specific about the drivers, seems to be comparability issues with some systems. seems like it's trial and error, pretty frustrating.
The Zadig drivers are all oh need for normal SDR software. Some DAB and TV software require different drivers.
Sdr radio on android
Do I connect the dongle before or after installing the drivers?
First download Zadig. Then connect the dongle. Then launch Zadig and make the adjustments as stated in this video.
Thanks :)
We can't get ham it up nor beef it down !
( cameling it even, poor us 3rd worlders :/ )
OK After HOURS of reinstalling drivers and NO contact phone number to this company and NO support whatsoever this is a bunch of CRAP! Ahh yea. Don't buy this garbage! It doesn't work AT ALL and the company doesn't even have a real person that will pick up the phone. Hell, they dont even have a phone number. I had to resort to CZcams to try and figure out how to install it as there is NO information whatsoever on their website. Complete WASTE OF TIME AND MONEY! GARBAGE!
Am I the only one that is bothered by the fact he is using the hard connection on the pc connection side and the cable on the antenna side?
Use linux and I'll sub. How-to videos in windoze helps me not.