Program cobra G4 remote Toyota unser Honda city Mitsubishi triton Isuzu Dmax & lain-lain
Vložit
- čas přidán 23. 05. 2024
- 1)Open bonnet, driver’s door, switch ignition to ON.(if no remote then needs to unplug battery “-“then connet back)
2)Press & hold Unlock button of remote untill double signal blinking. Key in pincode(normally is 1111)-switch button once wait for LED light blink once then switch second times…, after that LED light will stand on(if the pincode was correct)
3)Press & hold both buttons of the New remote until the remote light is stand on, then press the button again & LED light will blinking & on. All remote must program.
4) Close the bonnet & door. Test the remote.
#automobile #mml #toyota #honda #isuzu #dmax #g4 #cobra #fob