Mine is over 200 hours now. The hydrostatic whine will ease up a little bit after the first fluid change. Especially if you use their new stuff. Still loud. That cruise control lever really needs some sort of isolation from metal on metal touching that amplifies the hydrostat whine. For sure. I just ignore it and don't use it. Commented below on the window fog. The AC will take care of that. Also make sure if you really want the air super dry in the cab to play with the recirculation vs fresh air vent lever on the ceiling behind your head. Depending on outside humidity. Third function flow is a little weak, keep it revved to help with that. I have the rear tires ballasted and still think I want wheel spacers. Both for a slightly wider stance and for room to put chains on it. Going to go the winter and see how much I want those. Oh other non stock thing I added was after a while without the optional rear lights I added the Kubota ones. Bunch of ways to add lights but I wanted it to look the same back there as the front ones. Also replacing the headlight bulbs with LED ones is going to happen. It's silly they aren't using LED headlamps as stock. I think my only other complaint is I sit pretty high up and straight and the wiper being limited by the width of the front window doesn't quite come high enough for me for looking into the distance. Any loader or up close work is fine. There's a dirt line right at my eyeballs when sighting a mowing line on a fencepost a long way off. No big deal, but a very minor geometry problem with the wiper itself. Oh. The drawbar is a goofy size. Getting the right clevis for it to drag stuff around was a couple of visits to the ranch store. My fault really, I could have measured it. The hydraulic fill is tucked way under there and a long funnel is nice. They could have made that a little easier to get at. Not a big deal though. Not a fan of that dipstick being yellow plastic but that's getting pretty nitpicky. A metal dipstick with level holes is easier to read with nice clean fluid though, outdoors. 4WD is stiff but you have probably noticed a slight forward or backward and holding the brakes at the right time to unbind it and it'll move easily. Justike the range selector. I also didn't find the separate brakes all that useful and just leave them locked together all the time with the bar. Those are complaints. The positives are far more and well worth it. Nothing like mowing with the AC on out of the dust and dirt. Did that on an open tractor and a ZTR both for years and wouldn't go back! Can't say enough nice things about having a factory cab in this size tractor. I even have 8' garage doors on the house garage (someone put 7' residential openers on them though) and with my opener adjusted at max height, it'll just clear with touching the rubber radio antenna on the garage door. That's with the R14 tires all the way around. I've had a couple times where 26 HP is a little weak but I didn't want to deal with the regen system whatsoever. Nice review sir!
I appreciate your reply. I asked my salesman if the new fluid would help. After reading other comments In forum's. He didn't think it would, I was leaning that way your experience and comment sold the deal.my tires are also filed.
I just changed mine and used super udt2 I fill like it whines a little less but not much I watched messicks video and they are coming out with a 3520 and 4020LX discontinuing the 3310 and the new model has a better rear end that is supposed to be quieter
I don't know about your machine but I have the identical machine and I got to disagree. with it pulling hills in high range it absolutely amazes me I wasn't expecting it doesn't slow down a bit flies right up and I got some really steep hills here on the back roads and long
I noticed that wine with the cruise on myself so I don't even bother with it anymore pretty annoying otherwise I'm pretty happy with my tractor like you said not quite power of a 33 horse but it is what it is it's still a nice comfortable tractor
I have a open station 3310 and it has a lot of whine as well so I think it is a normal thing for this model! I think the B 2650 had the same complaint! On the grapple I believe I heard that when you activate the third function all of one function is lost due to fluid being diverted and that is in JD as well! My grapple does the same thing
Does your tractor feel tippy since you put fluid in the tires, and what kind of fluid did you use? Also, do you think it's just tippy because of the cab?
My lx2610 wines terrible the cruise is worse like yours.... Four wheel drive if it's hard to engage or disengage lift the front end off the ground a little bit with the loader pops right out
Mine is over 200 hours now. The hydrostatic whine will ease up a little bit after the first fluid change. Especially if you use their new stuff. Still loud.
That cruise control lever really needs some sort of isolation from metal on metal touching that amplifies the hydrostat whine. For sure. I just ignore it and don't use it.
Commented below on the window fog. The AC will take care of that. Also make sure if you really want the air super dry in the cab to play with the recirculation vs fresh air vent lever on the ceiling behind your head. Depending on outside humidity.
Third function flow is a little weak, keep it revved to help with that.
I have the rear tires ballasted and still think I want wheel spacers. Both for a slightly wider stance and for room to put chains on it. Going to go the winter and see how much I want those.
Oh other non stock thing I added was after a while without the optional rear lights I added the Kubota ones. Bunch of ways to add lights but I wanted it to look the same back there as the front ones.
Also replacing the headlight bulbs with LED ones is going to happen. It's silly they aren't using LED headlamps as stock.
I think my only other complaint is I sit pretty high up and straight and the wiper being limited by the width of the front window doesn't quite come high enough for me for looking into the distance. Any loader or up close work is fine. There's a dirt line right at my eyeballs when sighting a mowing line on a fencepost a long way off. No big deal, but a very minor geometry problem with the wiper itself.
Oh. The drawbar is a goofy size. Getting the right clevis for it to drag stuff around was a couple of visits to the ranch store. My fault really, I could have measured it.
The hydraulic fill is tucked way under there and a long funnel is nice. They could have made that a little easier to get at. Not a big deal though. Not a fan of that dipstick being yellow plastic but that's getting pretty nitpicky. A metal dipstick with level holes is easier to read with nice clean fluid though, outdoors.
4WD is stiff but you have probably noticed a slight forward or backward and holding the brakes at the right time to unbind it and it'll move easily. Justike the range selector. I also didn't find the separate brakes all that useful and just leave them locked together all the time with the bar.
Those are complaints. The positives are far more and well worth it. Nothing like mowing with the AC on out of the dust and dirt. Did that on an open tractor and a ZTR both for years and wouldn't go back! Can't say enough nice things about having a factory cab in this size tractor.
I even have 8' garage doors on the house garage (someone put 7' residential openers on them though) and with my opener adjusted at max height, it'll just clear with touching the rubber radio antenna on the garage door. That's with the R14 tires all the way around.
I've had a couple times where 26 HP is a little weak but I didn't want to deal with the regen system whatsoever.
Nice review sir!
I appreciate your reply. I asked my salesman if the new fluid would help. After reading other comments In forum's. He didn't think it would, I was leaning that way your experience and comment sold the deal.my tires are also filed.
Can you pull the wiper off and adjust it's swing radius? I know some are adjustable but haven't looked at Kubotas.
I have not tried it will look and see
What hydraulic fluid are you suggesting when the time comes?
I just changed mine and used super udt2 I fill like it whines a little less but not much I watched messicks video and they are coming out with a 3520 and 4020LX discontinuing the 3310 and the new model has a better rear end that is supposed to be quieter
I don't know about your machine but I have the identical machine and I got to disagree. with it pulling hills in high range it absolutely amazes me I wasn't expecting it doesn't slow down a bit flies right up and I got some really steep hills here on the back roads and long
I will take a video of mine next time iam out
Mine is basically brand new but seems much better in high range going up hill vs what my L250 was.
I noticed that wine with the cruise on myself so I don't even bother with it anymore pretty annoying otherwise I'm pretty happy with my tractor like you said not quite power of a 33 horse but it is what it is it's still a nice comfortable tractor
I have a open station 3310 and it has a lot of whine as well so I think it is a normal thing for this model! I think the B 2650 had the same complaint! On the grapple I believe I heard that when you activate the third function all of one function is lost due to fluid being diverted and that is in JD as well! My grapple does the same thing
I have heard some day that changing to the new Hydraulic fluid will reduce the whine a little
I noticed my cruise does the same thing ungodly wine so I don't even use the cruise anymore
I don't use mine either
My machine the whine can go right thru your skull at times.
It bogs down yeah can't have that happen spending that kind of money I'm going to get the 33 horsepower
I have over 300 hours on mine and I'll tell you the whining don't get no better
3310 is common rail turbo..
Yeah all Kubotas for the most part have slow hydraulics
I've been really impressed with the lifting capacity just wish there was a little more flow
Does your tractor feel tippy since you put fluid in the tires, and what kind of fluid did you use? Also, do you think it's just tippy because of the cab?
The fluid will help keep the tires planted, the tippy felling is from the narrow width.i am not sure what fluid the dealer put in the tires.
@@thehustleandhobby8694 the cab makes it top heavy, so they say.
My lx2610 wines terrible the cruise is worse like yours.... Four wheel drive if it's hard to engage or disengage lift the front end off the ground a little bit with the loader pops right out
They should pay you for advertising
Maybe some Day
Maybe I missed it, what rotary cutter are you using?
I have a 1248 land pride
I wish I would have gotten the heavier duty model
Can I use wheel spacers on the LX 3310 with mid-mount mower?
I don't think so I am considering getting rid of my MMM and getting a finish mower so I can run wheel spacers
Nice tractor be better if it was green haha
The green ones that size don't have factory cab
I know just giving you a hard time
They all have their issues/difference's.i didn't realize I have a Kioti dealer as close as I did or I might have got one of them.