Great project❤️ but I think this task could become more easy to implement with a bridge and a triac with a suitable triac driver. This also gave us a variety of speed ranges with every single value of slider!
@@techiesms For step 3 We can add a automation in home assistant so when we turn the knob to position 3 the input on esp32 is high and the automation will run and turn the other relay on, and when we changed to position to 2 or 4 the pin is low so it will turn off the relay by this we can use the manual regulator for all speeds, because im currently using my four switches by 8 automations 4 for turn on and another 4 for turn off the relays, By the way, I'm not a coding expert, just an idea Bro😅
As always Fantastic project. Please make a series of various tools like top 5 Soldering Irons, Soldering Stations, Solder flux etc. Please suggest any Indian company for Custom PCB. This will help to improve our practices in best way. Thanks.🌹🌹🌹🌹
Try replacing 4 relays in capacitor based fan dimmer with 1 relay and Mosfets( not zero crossing detector? Also try sleek relays to decrease size of PCB. Also try two layer PCB
Please take a look into the Template Sensor Component, you have to write a lambda function in it for proper fan speed control. It will be something like: if binary_sensor1.state == 0 && binary_sensor2.state == 1, then: do something ... Please check the documentation of the Template Sensor Component with its lambda examples. Regards. :)
Another great video, but the disturbing background music could be avoided or at lower volume, mainly for non-english viewers like me, who struggle just to follow the voice.
Connect speed 1 and speed 2 (From Manual switch gpio ) gpio through a resistor. Connect One transistor collector to the speed 1 gpio pin after resistor (esp32 side). Same way connect another transistor to speed 2 gpio. Both transistor emitter should be grounded. Both Transistor base pin connect to manual switch 3rd speed pin through base resistor. ( use 2 separate base resistor for each transistor.). Connect manual Switch 3rd position pin to GPIO13 in your case. When 3rd speed pin is high , transistor pull down the speed 1 and speed 2 gpio. you can also use 1 transistor but then u have to use 2 diode .. collector one diode to speed 1 GPIO , another diode to speed 2 gpio. Use 1 K resistor between esp and manual switch speed 1 , speed2.
Hello brother, I recently made an All in one home automation using Alexa by seeing your video and it worked fine for a month but not two manual switches are not working. I can control the appliances using Alexa buy there is no input being taken from manual switches. Could you please help me out here.
Great project❤️ but I think this task could become more easy to implement with a bridge and a triac with a suitable triac driver. This also gave us a variety of speed ranges with every single value of slider!
This is a great video for manual switches and fan regulators that I found on CZcams after searching for hours 🥳🥳
Happy Making 😇
@@techiesms For step 3 We can add a automation in home assistant so when we turn the knob to position 3 the input on esp32 is high and the automation will run and turn the other relay on, and when we changed to position to 2 or 4 the pin is low so it will turn off the relay by this we can use the manual regulator for all speeds, because im currently using my four switches by 8 automations 4 for turn on and another 4 for turn off the relays, By the way, I'm not a coding expert, just an idea Bro😅
Thanx for this video but sad to say it does not have like eeprom thing ,basically m not going to wake from my sleep to turn fan on again😂
Thank you.
i want to add local tuya 5speed fan on home assistan can you help me integrating...i have gor fan modular switch from market which runs on smart life
Good one, I have shared this video on CZcams because my friends were asking me how to reduce electricity bill
The Way you Explain is very good
all your projects are excellent 👍
Thanks a lot 😊
great video! very helpfull. thank you
Happy Making 😇
Thank you so much Soni. We really appreciate your hard work.
Thank you...
Why esp home assistant is not opening on laptop google,, and it is giving the error not reach on browser
I like this project
In mine studio code server is not found in esp home to install it...
Then how to find??
Great vídeo
Can we integrate atomberg fans on home assistant?
As always Fantastic project.
Please make a series of various tools like top 5 Soldering Irons, Soldering Stations, Solder flux etc. Please suggest any Indian company for Custom PCB. This will help to improve our practices in best way.
Thanks.🌹🌹🌹🌹
dear techiesms team,
i need a help.
i want to add wipro smart bulb to my raspberry pi alexa which you made previously.
where is the visual coder in ESP home Assistant not found to install
Try replacing 4 relays in capacitor based fan dimmer with 1 relay and Mosfets( not zero crossing detector?
Also try sleek relays to decrease size of PCB.
Also try two layer PCB
Please take a look into the Template Sensor Component, you have to write a lambda function in it for proper fan speed control. It will be something like: if binary_sensor1.state == 0 && binary_sensor2.state == 1, then: do something ... Please check the documentation of the Template Sensor Component with its lambda examples. Regards. :)
Ó
Sir,hw can get program backup from arduino and node.?
Excellent
Thank you so much 😀
Great video. In next video please use touch switches instead of manual switches. I will waiting for it.
Can you share pcb design?
Why not using esp32 ble option?
Another great video, but the disturbing background music could be avoided or at lower volume, mainly for non-english viewers like me, who struggle just to follow the voice.
Great share ✨👏
Thank you! 🤗
Nice Video
Thanks
How you install it on mobile...guide..
Connect speed 1 and speed 2 (From Manual switch gpio ) gpio through a resistor. Connect One transistor collector to the speed 1 gpio pin after resistor (esp32 side). Same way connect another transistor to speed 2 gpio. Both transistor emitter should be grounded. Both Transistor base pin connect to manual switch 3rd speed pin through base resistor. ( use 2 separate base resistor for each transistor.). Connect manual Switch 3rd position pin to GPIO13 in your case.
When 3rd speed pin is high , transistor pull down the speed 1 and speed 2 gpio.
you can also use 1 transistor but then u have to use 2 diode .. collector one diode to speed 1 GPIO , another diode to speed 2 gpio. Use 1 K resistor between esp and manual switch speed 1 , speed2.
If you need help share your email I’d I will send you the circuit
where to connect manual fan regulator
Are you able to make a smart greenhouse project using IOT
@techiesms
Sir Make next Video on, Build Your Own Google Home + Alexa Smart Speaker
from where you install the ESPhome assistant setup
kindly guide
Watch this czcams.com/video/DfiFL-n3hBk/video.html
sir please give the pcb gerber file for this project
I need the gerber file for the pcb. Can you please provide me with the same?
Sorry we can't as we are selling this complete project
@@techiesms But , Sir Your Complete Project Price Is so High Please Provide The PCB Gerber File .
Hello brother, I recently made an All in one home automation using Alexa by seeing your video and it worked fine for a month but not two manual switches are not working. I can control the appliances using Alexa buy there is no input being taken from manual switches. Could you please help me out here.
Are you getting the data inside serial monitor?
@@techiesms serial monitor just shows some random symbols.
Great project!! 👌 Can we used ttp223 touch sensor instead of manual switch!!
Yes
@@techiesms can you help me out of this code for ttp223
What special about home assistant when compared to esprainmaker which is best to go....... 🤔🤔🤔
Depends upon am Individual
Every platform is good
@@techiesms like for some we have to pay monthly or limited controls right sir
In that way I am asking
Both home assistant and rainmaker are free
I would like to ask what will be the state of the relay be when power goes off and comes in
Off
@@techiesms for example if relay 1 is on at the time and if power goes off and comes in will will the relay state be same or off
speed control ke oiye hardware kya use kia gya hai ?
watch this czcams.com/video/kMqcRaBRDRY/video.html
Do u ship to usa? Also does it work with 110v
please connect with us on Whatsapp
It's can add momentary function
Make hand gesture using mpu6050
Please make some videos on esp8266
Make smart IR blaster project
can you please provide gerber file of this project ?
No sorry
We are selling this complete project with all the components already soldered on it
Can we use with Alexa ?
yes if you integrate alexa with home assistant
Is this an smart phone app???
Yes
plz hindi sar
Bhai hindi bhasha me banavo kya bolte ho malum nahi padta