I'm currently working on a gy6 139qmb 50cc stock with an 80bbk can, built transmission ECT. I'm trying to switch from my current 22mm cvk carb to a flat side , can this be done on a gy650cc ? Do you need to change you're grip throttle as well?
I'm not trying to correct you but the GY6 guy has the jetting and carb for the 150 at 26mm 35 pilot jet 110 main but I know that jetting be located but are you saying that the 30mm is going to be the best bet for the 150cc. We plan on doing the delete of that catalytic converter or doing a aftermarket exhaust and we live in Toledo Ohio 650ft above sea level. Idk to much about the IceBear trike 150 but we are set out to get the best out of it and looking for information of things to switch out to do so. Carb exhaust CDI coil ext so if you have links to parts recommend I would appreciate that thanks in advance
In our experience of working on the gy6 platform for 15 years this setup works best from 150cc - 232cc. Jetting will vary on elevation, temperature, and each engine setup. dorbyworks.com/shop/ols/products/oko-30mm-carburetor-dorbyworks-black-edition
@@MrDorby do I just need a carburetor or do I need a whole intake manifold is that a carburetor intake manifold and carb kit? 2021 IceBear 150 trike no mods yet but want to follow what should be first mod and then on. So far I gather an aftermarket carburetor intake manifold more than likely the fuel pump is the emissions delete necessary? I imagine deleting that catalytic converter be best I wish I could find someplace that has actual list of mods part numbers
@@michaellarcom The carb requires a intake manifold upgrade. I don't think a icebear trike has a Catalytic. However a upgraded exhaust would benefit the performance. Email us at Dorbyworks@hotmail.com for more assistance.
Dude installing the throttle cable to the slider took me waaaaay longer than I care to admit the first time around 😅
Nice
Great Video. We need more videos like this. 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉 you make it so simple
I'm currently working on a gy6 139qmb 50cc stock with an 80bbk can, built transmission ECT. I'm trying to switch from my current 22mm cvk carb to a flat side , can this be done on a gy650cc ? Do you need to change you're grip throttle as well?
This setup is recommended on 150cc+
I'm not trying to correct you but the GY6 guy has the jetting and carb for the 150 at 26mm 35 pilot jet 110 main but I know that jetting be located but are you saying that the 30mm is going to be the best bet for the 150cc. We plan on doing the delete of that catalytic converter or doing a aftermarket exhaust and we live in Toledo Ohio 650ft above sea level. Idk to much about the IceBear trike 150 but we are set out to get the best out of it and looking for information of things to switch out to do so. Carb exhaust CDI coil ext so if you have links to parts recommend I would appreciate that thanks in advance
In our experience of working on the gy6 platform for 15 years this setup works best from 150cc - 232cc. Jetting will vary on elevation, temperature, and each engine setup.
dorbyworks.com/shop/ols/products/oko-30mm-carburetor-dorbyworks-black-edition
A tune should be based off of AFR rating. That tells you true numbers to what your engine is doing.
@@MrDorby do I just need a carburetor or do I need a whole intake manifold is that a carburetor intake manifold and carb kit? 2021 IceBear 150 trike no mods yet but want to follow what should be first mod and then on. So far I gather an aftermarket carburetor intake manifold more than likely the fuel pump is the emissions delete necessary? I imagine deleting that catalytic converter be best I wish I could find someplace that has actual list of mods part numbers
@@michaellarcom The carb requires a intake manifold upgrade. I don't think a icebear trike has a Catalytic. However a upgraded exhaust would benefit the performance. Email us at Dorbyworks@hotmail.com for more assistance.