How To Make A Simple Drill Powered Jack Using Motorcycle Sprocket And Chain | DIY
Vložit
- čas přidán 13. 09. 2024
- Hello Everyone!
Today I show you how to make a simple drill powered jack using motorcycle sprocket and chain. I converted the rotary motion into linear motion with the help of nut and bolt. I used 20mm nut and bolt to make this diy jack. To increase the torque from the drill machine I used sprockets, chain and a angle grinder gear box. 90 degree transmission is achieved by using the angle grinder gear box. This diy car jack is very simple and easy to make at home. This homemade car jack is very powerful and it lifts the car very easily. By using this homemade jack vehicles can be very quickly lifted. No physical effort is required to operate this diy homemade car jack. This homemade jack is operated by the drill machine. This drill hack is very interesting. I really enjoyed the making of this diy jack. This diy jack really works good. I hope you guys will enjoy this angle grinder hack.
Click here to SUBSCRIBE Diamleon Diy Builds:
/ diamleondiybuilds
Support me on PATREON:
/ diamleondiybuilds
Social Media:
Facebook: / diamleondiybuilds
Instagram: / diamleondiybuilds
Twitter: / diamleondiy
Contact Mail Id:
diamleondiybuilds@gmail.com
Thanks for watching
Hit LIKE & SUBSCRIBE button
#diamleondiybuilds
#carjack
#homemadetools
#anglegrinderhack
You have great idea. I have few Questions:
1-What’s the purpose of straight cut you made on the screw threads?
2-Where is this straight cut engaging inside the Nut?
3-How you stopped the screw from rotating while you drive the sprocket (There must be something engaged with the straight slot you made on the Screw.
I will appreciate if you give little information on that as well. Thanks 🙏
Thanks man. The straight cut is engaged to a pin which is welded to the pipe 4:35 . The bold moves up and down, then the bold rotation is prevented by the pin
VEREY GOOD
Thanks bro
MUY BUENO EL GATO LO FELICITO GRACIAS
Thanks man
Mmmmmmmmm veo que se debe usar un taladro porque si lo hiciéramos manualmente tardaria mucho
Yes you are right
I LIKE UR IDEA Diamleon
Thanks bro
Хорошо задумано
Great Idea Man.
Thanks dude
Wow great, please make a video how to run a manual noodles making machine with this hack... I am waiting for this
Thanks man
@@DiamleonDiyBuilds waiting for your video, how to run manual noddles machine with any method.
That's amazing
Thanks dude
Perfect.
Thanks man
Very good engineering product...nice
Thanks dude
Good job good idea well done mister
Thanks man
Harikasınız👍👍👍
молодец ты мужик жму руку
Full supporting 👍👍👍
Thanku
Really useful 🙏
Thanks man
Amazing
Thanks bro
Very innovative . Like this build.
Thanks bro
Great and useful tool. Good ideas. Thanks ..intereesting videoz👌💯😊
Thank you very much bro
@@DiamleonDiyBuilds
My pleasure
And you are welcome mybro👌😊☕
Good ii boss 👍👍✌️✌️
Thanks yusuf
Hello, very good invention, but could you tell me if you did the physical calculations to be able to know the weight capacity that it can withstand?
I would also like to suggest that you should have put a stop on it so that the screw does not come out. But the idea is very good.
Hola quiero respuesta no corazones.
good job , one like !
Thanks dude
U
Where did you buy a scrocket adapter for the drill?)
Could you share the diameter and length of the screw, and the caliber of the tube that you used.
Ja serve
Little ramps(threads)
Do lot’s of work buddy
🙂👍👍👍👍👍
Thanks dude
show
Thanks
Pino allievi
👍👍👍....അടിപൊളി, സ്ഥലം എവിടെയാ?
Thanku
Need your nu for order
Roller bender without welding
Sorry I'm not selling it bro
Not a simple thing